signed and unsigned arithmetic in VHDL - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the difference between signed and unsigned types in VHDL?

signed represents numbers that can be positive or negative (including a sign bit). unsigned represents only positive numbers (no sign bit).

beginner

How do you add two signed numbers in VHDL?

You use the + operator after including the ieee.numeric_std library, which supports arithmetic on signed types.

intermediate

Why should you avoid mixing signed and unsigned types directly in arithmetic operations?

Because they represent different number ranges and mixing them can cause incorrect results or require explicit type conversions.

beginner

What library must be included to use signed and unsigned arithmetic in VHDL?

You must include ieee.numeric_std to use signed and unsigned types and their arithmetic operations.

intermediate

How do you convert an unsigned value to signed in VHDL?

You use the signed() type cast function, for example: signed(unsigned_value).

Which VHDL type can represent negative numbers?

A std_logic

B unsigned

C signed

D bit

signed type includes a sign bit and can represent negative numbers.

What library is required for arithmetic on signed and unsigned types?

A ieee.std_logic_1164

B work.my_package

C std.textio

D ieee.numeric_std

ieee.numeric_std provides arithmetic support for signed and unsigned types.

What happens if you add a signed and an unsigned value without conversion?

A It causes a type mismatch error

B It works fine without errors

C The result is always zero

D The result is always negative

VHDL requires explicit type conversion between signed and unsigned to avoid errors.

How do you convert an unsigned value to signed?

A Use <code>signed()</code>

B Use <code>to_signed()</code>

C Use <code>to_unsigned()</code>

D No conversion needed

The signed() function casts an unsigned value to signed.

Which operator is used to add two signed numbers in VHDL?

A -

B +

C *

D &

The + operator adds two signed numbers.

Explain the difference between signed and unsigned types in VHDL and why it matters for arithmetic operations.

Think about how computers represent positive and negative numbers.

Describe the steps to add two signed numbers in VHDL, including any necessary library imports.

Remember the library that supports arithmetic on signed types.

Practice

1. Which VHDL type should you use to correctly represent negative numbers in arithmetic operations?

easy

A. unsigned

B. signed

C. std_logic_vector

D. bit_vector

Solution

1. Step 1: Understand number representation types

   Signed types allow representation of both positive and negative numbers, unlike unsigned which only represent zero and positive numbers.

2. Step 2: Identify correct VHDL type for negatives

   In VHDL, the signed type from numeric_std is used for signed arithmetic, supporting negative values.

3. Final Answer:

   signed -> Option B

4. Quick Check:

   Negative numbers need signed type [OK]

Hint: Use signed type for negatives, unsigned for positives only [OK]

Common Mistakes:

• Using unsigned for negative numbers
• Using std_logic_vector without conversion
• Confusing bit_vector with numeric types

2. Which of the following is the correct way to declare a 4-bit unsigned signal in VHDL using numeric_std?

easy

A. signal data : signed(3 downto 0);

B. signal data : bit_vector(3 downto 0);

C. signal data : std_logic_vector(4 downto 0);

D. signal data : unsigned(3 downto 0);

Solution

1. Step 1: Identify the correct type for unsigned 4-bit signal

   The unsigned type from numeric_std is used for unsigned arithmetic and must have 4 bits indexed from 3 downto 0.

2. Step 2: Check each option

   signal data : signed(3 downto 0); uses signed type, which is for signed numbers. signal data : std_logic_vector(4 downto 0); has 5 bits (4 downto 0). signal data : bit_vector(3 downto 0); uses bit_vector, which is not numeric.

3. Final Answer:

   signal data : unsigned(3 downto 0); -> Option D

4. Quick Check:

   Unsigned 4-bit signal uses unsigned(3 downto 0) [OK]

Hint: Unsigned signals use unsigned type with correct bit range [OK]

Common Mistakes:

• Using signed instead of unsigned
• Incorrect bit range (off by one)
• Using std_logic_vector without conversion

3. Given the following VHDL code snippet, what is the decimal value of result after execution?

signal a : signed(3 downto 0) := "1101"; -- -3 in decimal
signal b : unsigned(3 downto 0) := "0011"; -- 3 in decimal
signal result : signed(4 downto 0);

result <= a + signed(resize(b, 5));

medium

A. 0

B. -6

C. 6

D. -3

Solution

1. Step 1: Convert signals to decimal

   a is signed "1101" which is -3 in decimal. b is unsigned "0011" which is 3 in decimal.

2. Step 2: Resize and add values

   b is resized to 5 bits and converted to signed, so 3 remains 3. Adding -3 + 3 = 0.

3. Final Answer:

   0 -> Option A

4. Quick Check:

   -3 + 3 = 0 [OK]

Hint: Convert both to signed before adding, then add values [OK]

Common Mistakes:

• Adding signed and unsigned directly without conversion
• Misinterpreting binary signed values
• Ignoring resize causing wrong bit width

4. Identify the error in the following VHDL code snippet:

signal x : signed(3 downto 0) := "0110";
signal y : unsigned(3 downto 0) := "0011";
signal z : signed(3 downto 0);
z <= x + y;

medium

A. Cannot add signed and unsigned directly without conversion

B. Signal z is declared with wrong bit range

C. Initialization of x is invalid binary

D. No error, code is correct

Solution

1. Step 1: Check types in addition

   In VHDL, you cannot add a signed and an unsigned type directly without converting one to the other's type.

2. Step 2: Identify missing conversion

   The code adds signed x and unsigned y directly, which causes a type mismatch error.

3. Final Answer:

   Cannot add signed and unsigned directly without conversion -> Option A

4. Quick Check:

   Signed + unsigned needs conversion [OK]

Hint: Convert unsigned to signed before adding to signed [OK]

Common Mistakes:

• Adding signed and unsigned without conversion
• Assuming std_logic_vector works for arithmetic
• Ignoring type mismatch errors

5. You want to subtract an unsigned 4-bit number b from a signed 5-bit number a in VHDL. Which is the correct way to perform this operation and store the result in a signed 6-bit signal result?

hard

A. result <= signed(a) - unsigned(b);

B. result <= a - b;

C. result <= resize(a, 6) - signed(resize(b, 6));

D. result <= resize(a, 5) - resize(b, 5);

Solution

1. Step 1: Understand type and size requirements

   To subtract unsigned b from signed a, both must be the same type and size. The result signal is 6 bits signed.

2. Step 2: Convert and resize operands properly

   Resize a to 6 bits signed, convert and resize b to signed 6 bits, then subtract.

3. Final Answer:

   result <= resize(a, 6) - signed(resize(b, 6)); -> Option C

4. Quick Check:

   Resize and convert unsigned to signed before subtracting [OK]

Hint: Resize both and convert unsigned to signed before subtracting [OK]

Common Mistakes:

• Subtracting without resizing operands
• Not converting unsigned to signed before subtraction
• Assigning result to smaller bit width