D flip-flop with asynchronous reset in VHDL

Introduction

A D flip-flop stores a single bit of data and updates it on a clock edge. The asynchronous reset lets you clear the stored value immediately, without waiting for the clock.

You want to save a bit of information that changes only at specific times.

You need to reset the stored value instantly when a reset signal is active.

You are designing a simple memory element in digital circuits.

You want to control data flow in a synchronous system but allow immediate reset.

Syntax

VHDL

process(clk, reset_n)
begin
  if reset_n = '0' then
    q <= '0';
  elsif rising_edge(clk) then
    q <= d;
  end if;
end process;

The process is sensitive to both clock and reset signals.

Reset is asynchronous because it acts immediately when active, ignoring the clock.

Examples

Reset is active high and asynchronous.

VHDL

process(clk, reset)
begin
  if reset = '1' then
    q <= '0';
  elsif rising_edge(clk) then
    q <= d;
  end if;
end process;

Reset is active low and asynchronous.

VHDL

process(clk, rst)
begin
  if rst = '0' then
    q <= '0';
  elsif rising_edge(clk) then
    q <= d;
  end if;
end process;

Sample Program

This VHDL code defines a D flip-flop with an asynchronous reset. When reset is '1', output q is immediately cleared to '0'. On the rising edge of the clock, q takes the value of d.

VHDL

library ieee;
use ieee.std_logic_1164.all;

entity dff_async_reset is
  port(
    clk   : in std_logic;
    reset : in std_logic;
    d     : in std_logic;
    q     : out std_logic
  );
end dff_async_reset;

architecture behavioral of dff_async_reset is
  signal q_int : std_logic := '0';
begin
  process(clk, reset)
  begin
    if reset = '1' then
      q_int <= '0';
    elsif rising_edge(clk) then
      q_int <= d;
    end if;
  end process;

  q <= q_int;
end behavioral;

Important Notes

Asynchronous reset means the output resets immediately when reset is active, regardless of the clock.

Make sure the reset signal is clean to avoid unintended resets.

Use active high or active low reset consistently in your design.

Summary

D flip-flops store data on clock edges.

Asynchronous reset clears the output immediately.

Use this to control data storage and quick reset in digital circuits.

Practice

1. What is the main function of the asynchronous reset in a D flip-flop?

easy

A. It stores data only on the rising edge of the clock.

B. It immediately clears the output regardless of the clock.

C. It delays the output change until the next clock edge.

D. It toggles the output on every clock cycle.

Solution

1. Step 1: Understand asynchronous reset behavior

   Asynchronous reset clears the output immediately, without waiting for the clock.

2. Step 2: Compare with clocked behavior

   Unlike clocked data storage, asynchronous reset acts instantly when active.

3. Final Answer:

   It immediately clears the output regardless of the clock. -> Option B

4. Quick Check:

   Asynchronous reset = immediate clear [OK]

Hint: Asynchronous reset acts instantly, ignoring clock [OK]

Common Mistakes:

• Confusing asynchronous reset with clocked data storage
• Thinking reset waits for clock edge
• Assuming reset toggles output

2. Which of the following VHDL code snippets correctly declares a D flip-flop with asynchronous reset?

easy

A. process(clk) begin if reset = '1' then q <= '0'; elsif rising_edge(clk) then q <= d; end if; end process;

B. process(clk) begin if rising_edge(clk) then if reset = '1' then q <= '0'; else q <= d; end if; end if; end process;

C. process(clk, reset) begin if reset = '1' then q <= '0'; elsif rising_edge(clk) then q <= d; end if; end process;

D. process(reset) begin if reset = '1' then q <= '0'; end if; end process;

Solution

1. Step 1: Check sensitivity list for asynchronous reset

   Asynchronous reset requires reset signal in sensitivity list along with clock.

2. Step 2: Verify reset condition before clock edge

   Reset condition must be checked first, then clock edge for data update.

3. Final Answer:

   process(clk, reset) begin if reset = '1' then q <= '0'; elsif rising_edge(clk) then q <= d; end if; end process; -> Option C

4. Quick Check:

   Reset in sensitivity list + reset checked first = correct async reset [OK]

Hint: Async reset needs reset in sensitivity list and checked first [OK]

Common Mistakes:

• Omitting reset from sensitivity list
• Checking reset inside clock edge condition
• Using only reset process without clock

3. Given this VHDL process for a D flip-flop with asynchronous reset:

process(clk, reset)
begin
  if reset = '1' then
    q <= '0';
  elsif rising_edge(clk) then
    q <= d;
  end if;
end process;

If reset is '0', d is '1', and a rising edge on clk occurs, what will be the value of q?

medium

A. Undefined

B. '0'

C. No change

D. '1'

Solution

1. Step 1: Check reset signal

   Reset is '0', so asynchronous reset does not clear output.

2. Step 2: Check clock edge and data input

   Rising edge on clk triggers q to take value of d, which is '1'.

3. Final Answer:

   '1' -> Option D

4. Quick Check:

   Reset '0' + rising clk + d='1' means q='1' [OK]

Hint: Reset '0' means normal clocked data update [OK]

Common Mistakes:

• Assuming reset clears output when '0'
• Ignoring clock edge
• Thinking output stays unchanged

4. Identify the error in this VHDL code for a D flip-flop with asynchronous reset:

process(clk)
begin
  if reset = '1' then
    q <= '0';
  elsif rising_edge(clk) then
    q <= d;
  end if;
end process;

medium

A. Reset signal is not in the sensitivity list for asynchronous reset.

B. The reset condition should be checked after the clock edge.

C. The process should not use rising_edge(clk) for a flip-flop.

D. The output q should be assigned using <= only inside clock edge.

Solution

1. Step 1: Check sensitivity list for asynchronous reset

   Asynchronous reset requires reset signal in sensitivity list to respond immediately.

2. Step 2: Analyze reset checking position

   Reset is checked before clock edge, which is correct, but missing reset in sensitivity list causes error.

3. Final Answer:

   Reset signal is not in the sensitivity list for asynchronous reset. -> Option A

4. Quick Check:

   Async reset needs reset in sensitivity list [OK]

Hint: Async reset must be in sensitivity list [OK]

Common Mistakes:

• Omitting reset from sensitivity list
• Checking reset after clock edge
• Misusing rising_edge for flip-flop

5. You want to design a D flip-flop with asynchronous reset that sets output q to '0' immediately when reset is '1', and otherwise updates q with d on the rising edge of clk. Which VHDL process correctly implements this behavior and avoids unintended latches?

hard

A. process(clk, reset) begin if reset = '1' then q <= '0'; elsif rising_edge(clk) then q <= d; end if; end process;

B. process(clk) begin if rising_edge(clk) then if reset = '1' then q <= '0'; else q <= d; end if; end if; end process;

C. process(reset) begin if reset = '1' then q <= '0'; else q <= d; end if; end process;

D. process(clk, reset) begin if rising_edge(clk) then if reset = '1' then q <= '0'; else q <= d; end if; end if; end process;

Solution

1. Step 1: Check sensitivity list for asynchronous reset

   Reset and clk must be in sensitivity list for asynchronous reset to work properly.

2. Step 2: Verify reset checked before clock edge

   Reset condition checked first ensures immediate clearing without waiting for clock.

3. Step 3: Confirm no latches created

   All outputs assigned in all branches, so no unintended latches occur.

4. Final Answer:

   process(clk, reset) begin if reset = '1' then q <= '0'; elsif rising_edge(clk) then q <= d; end if; end process; -> Option A

5. Quick Check:

   Reset in sensitivity + reset first + all assignments = correct async reset flip-flop [OK]

Hint: Reset in sensitivity list and checked first avoids latches [OK]

Common Mistakes:

• Checking reset inside clock edge (not async)
• Missing reset in sensitivity list
• Creating latches by incomplete assignments