Randomized test stimulus in Verilog

Introduction

Randomized test stimulus helps check if your digital design works well with many different inputs. It finds problems you might miss with fixed tests.

When you want to test a digital circuit with many different input values automatically.

When you want to find unexpected bugs by trying random input combinations.

When you want to save time writing many test cases by hand.

When you want to check how your design behaves under unusual or rare input conditions.

Syntax

Verilog

initial begin
  input_signal = $urandom_range(min_value, max_value);
  #delay;
end

$urandom_range(min, max) generates a random number between min and max, inclusive.

Use initial block to start the random stimulus at the beginning of simulation.

Examples

This sets data to a random number between 0 and 255 at the start, then waits 10 time units.

Verilog

initial begin
  data = $urandom_range(0, 255);
  #10;
end

On every clock pulse, addr gets a new random value between 0 and 15.

Verilog

always @(posedge clk) begin
  addr <= $urandom_range(0, 15);
end

Sample Program

This program generates 5 random 4-bit numbers between 0 and 15. It prints each number with a 5 time unit delay between them.

Verilog

module test_random;
  reg [3:0] data;
  initial begin
    $display("Starting random test stimulus");
    repeat (5) begin
      data = $urandom_range(0, 15);
      $display("Random data: %d", data);
      #5;
    end
    $finish;
  end
endmodule

Important Notes

Random numbers in simulation can be different each run unless you set a seed with $urandom(seed).

Use delays (#) to space out stimulus changes so the design can react.

Random stimulus helps find bugs but also add fixed tests to check known cases.

Summary

Randomized test stimulus automatically tests your design with many input values.

Use $urandom_range(min, max) inside initial or always blocks to generate random inputs.

This method helps find hidden bugs and saves time writing many test cases.

Practice

1. What is the main purpose of using randomized test stimulus in Verilog testbenches?

easy

A. To manually set fixed input values for testing

B. To automatically test the design with many different input values

C. To speed up synthesis of the design

D. To generate clock signals for the design

Solution

1. Step 1: Understand randomized test stimulus

   Randomized test stimulus means giving the design many different input values automatically.

2. Step 2: Identify the purpose

   This helps find bugs by testing many cases without writing each one manually.

3. Final Answer:

   To automatically test the design with many different input values -> Option B

4. Quick Check:

   Randomized testing = automatic varied inputs [OK]

Hint: Random stimulus means many inputs tested automatically [OK]

Common Mistakes:

• Thinking it sets fixed inputs manually
• Confusing with clock generation
• Assuming it speeds synthesis

2. Which of the following is the correct syntax to generate a random number between 0 and 15 in Verilog?

easy

A. random(0, 15)

B. $random(0, 15)

C. $urandom(0, 15)

D. $urandom_range(0, 15)

Solution

1. Step 1: Recall Verilog random functions

   $urandom_range(min, max) generates a random number between min and max inclusive.

2. Step 2: Check options

   Only $urandom_range(0, 15) uses $urandom_range with correct syntax and parameters.

3. Final Answer:

   $urandom_range(0, 15) -> Option D

4. Quick Check:

   $urandom_range(min, max) = correct syntax [OK]

Hint: Use $urandom_range(min, max) for bounded random numbers [OK]

Common Mistakes:

• Using $random with parameters (wrong syntax)
• Using random without $ sign
• Using $urandom without range

3. Given the following Verilog code snippet inside an initial block:

reg [3:0] data;
initial begin
  data = $urandom_range(0, 15);
  $display("Data = %d", data);
end

What is the expected output?

medium

A. Data = a random number between 0 and 15

B. Data = 0

C. Data = 15

D. Syntax error

Solution

1. Step 1: Understand $urandom_range usage

   $urandom_range(0, 15) returns a random integer from 0 to 15 inclusive.

2. Step 2: Analyze $display output

   The $display prints the value of data, which is the random number assigned.

3. Final Answer:

   Data = a random number between 0 and 15 -> Option A

4. Quick Check:

   Random assignment prints random value [OK]

Hint: Random range assigns varied values printed by $display [OK]

Common Mistakes:

• Assuming fixed value 0 or 15
• Expecting syntax error
• Confusing $urandom_range with $random

4. Identify the error in this Verilog code snippet for random stimulus:

reg [7:0] input_signal;
initial begin
  input_signal = $urandom_range(255);
end

medium

A. Missing second argument in $urandom_range

B. input_signal should be wire, not reg

C. initial block cannot assign values

D. Syntax is correct, no error

Solution

1. Step 1: Check $urandom_range usage

   $urandom_range requires two arguments: minimum and maximum values.

2. Step 2: Identify missing argument

   Code uses only one argument (255), missing the minimum value.

3. Final Answer:

   Missing second argument in $urandom_range -> Option A

4. Quick Check:

   $urandom_range needs min and max [OK]

Hint: $urandom_range needs two numbers: min and max [OK]

Common Mistakes:

• Using only one argument in $urandom_range
• Thinking reg cannot be assigned in initial
• Confusing reg and wire usage

5. You want to test a 4-bit input signal with random values between 3 and 12 repeatedly every 10 time units. Which Verilog code snippet correctly implements this randomized test stimulus?

hard

A. always #10 input_signal = $urandom_range(3, 12)

B. always @(posedge clk) input_signal = $urandom_range(3, 12);

C. initial begin
forever #10 input_signal = $urandom_range(3, 12);
end

D. initial input_signal = $urandom_range(3, 12);

Solution

1. Step 1: Understand repeated random assignment every 10 time units

   Using initial with forever loop and delay #10 repeats the assignment continuously.

2. Step 2: Check options

   The always #10 option causes syntax issues due to improper structure.
   The @(posedge clk) option triggers on clock edges instead of time delays.
   The simple initial option assigns only once.
   The initial begin forever #10 option correctly repeats every 10 time units.

3. Final Answer:

   initial begin forever #10 input_signal = $urandom_range(3, 12); end -> Option C

4. Quick Check:

   Use initial + forever + #delay for repeated random stimulus [OK]

Hint: Use initial with forever and #delay for repeated random inputs [OK]

Common Mistakes:

• Using always without begin-end block
• Assigning only once in initial
• Confusing clock edge with time delay