Normally open (NO) contact in PLC Programming

Introduction

A normally open (NO) contact lets electricity flow only when it is activated. It is like a door that stays closed until you open it.

To start a machine only when a button is pressed.

To turn on a light when a sensor detects something.

To allow current to pass only when a switch is flipped on.

To control a motor that should run only under certain conditions.

Syntax

PLC Programming

NO Contact: --| |--

In ladder logic, the NO contact is shown as two vertical lines with a gap between them.

The NO contact is open by default and closes when the input is true.

It is used to check if a condition is met before allowing current to flow.

Examples

This example shows a NO contact named Start_Button controlling a Motor coil. The motor runs only when the button is pressed.

PLC Programming

--| |-- Start_Button
--( )-- Motor

Two NO contacts in series mean both Sensor_OK and Safety_OK must be true to run the Conveyor.

PLC Programming

--| |-- Sensor_OK
--| |-- Safety_OK
--( )-- Conveyor

Sample Program

This simple program uses a normally open contact Start_Button to control Motor. When Start_Button is TRUE (pressed), Motor turns ON.

PLC Programming

(* Ladder logic example in structured text style for clarity *)
VAR
  Start_Button : BOOL := FALSE;
  Motor : BOOL := FALSE;
END_VAR

(* Normally open contact logic *)
Motor := Start_Button;

(* Simulate pressing the button *)
Start_Button := TRUE;
Motor := Start_Button;

(* Output motor state *)
IF Motor THEN
  WriteLn('Motor is ON');
ELSE
  WriteLn('Motor is OFF');
END_IF;

Important Notes

NO contacts close (allow current) only when their input is TRUE.

They are used to start or enable devices in automation.

Remember, NO means the circuit is open until activated.

Summary

A normally open (NO) contact is open by default and closes when activated.

It controls devices by allowing current only when conditions are met.

Commonly used for start buttons, sensors, and safety checks.

Practice

1. What does a Normally Open (NO) contact do in a PLC circuit?

easy

A. It remains open until activated, then closes to allow current flow.

B. It remains closed until activated, then opens to stop current flow.

C. It always stays closed regardless of activation.

D. It always stays open regardless of activation.

Solution

1. Step 1: Understand NO contact default state

   A Normally Open contact is open by default, meaning no current flows through it initially.

2. Step 2: Behavior when activated

   When the NO contact is activated (e.g., button pressed), it closes, allowing current to flow.

3. Final Answer:

   It remains open until activated, then closes to allow current flow. -> Option A

4. Quick Check:

   NO contact = open by default, closes when activated [OK]

Hint: NO means open until pressed, then closes [OK]

Common Mistakes:

• Confusing NO with Normally Closed (NC) contact
• Thinking NO contact is closed by default
• Assuming NO contact always stays open

2. Which of the following is the correct syntax to represent a Normally Open (NO) contact in a PLC ladder logic program?

easy

A. --[/]-- symbol

B. |/| symbol

C. | | symbol

D. --[ ]-- symbol

Solution

1. Step 1: Identify NO contact symbol

   The Normally Open contact is represented by two parallel vertical lines: | |.

2. Step 2: Differentiate from NC contact

   The Normally Closed contact uses |/| or --[/]-- symbols, which are different.

3. Final Answer:

   | | symbol -> Option C

4. Quick Check:

   NO contact = | | [OK]

Hint: NO contact looks like two parallel lines | | [OK]

Common Mistakes:

• Using NC contact symbol for NO contact
• Confusing ladder logic symbols
• Mixing up contact and coil symbols

3. Given the following ladder logic snippet with a Normally Open (NO) contact named Start_Button controlling a coil Motor, what happens when Start_Button is pressed?

--| |--( )--
  Start_Button  Motor

medium

A. Motor coil de-energizes, turning the motor OFF.

B. Motor coil energizes, turning the motor ON.

C. Nothing happens; the motor state remains unchanged.

D. Motor coil toggles ON and OFF rapidly.

Solution

1. Step 1: Analyze NO contact behavior when pressed

   Pressing the Start_Button closes the NO contact, allowing current to flow.

2. Step 2: Effect on coil Motor

   Current energizes the Motor coil, turning the motor ON.

3. Final Answer:

   Motor coil energizes, turning the motor ON. -> Option B

4. Quick Check:

   NO contact pressed = coil energized [OK]

Hint: Pressing NO contact energizes coil [OK]

Common Mistakes:

• Assuming coil de-energizes when NO contact closes
• Thinking NO contact does not affect coil
• Confusing coil with contact behavior

4. In the ladder logic below, the Normally Open (NO) contact Sensor is supposed to start the Conveyor motor. However, the motor never starts even when the sensor is triggered. What is the likely error?

--|/|--( )--
 Sensor Conveyor

medium

A. The contact is Normally Closed (NC) instead of Normally Open (NO).

B. The coil Conveyor is wired incorrectly.

C. The sensor is not physically connected.

D. The power supply is off.

Solution

1. Step 1: Identify contact type in code

   The contact symbol |/| represents a Normally Closed (NC) contact, not Normally Open (NO).

2. Step 2: Effect of NC contact on motor start

   Since the sensor is triggered (activated), the NC contact opens, breaking the circuit and preventing the motor from starting.

3. Final Answer:

   The contact is Normally Closed (NC) instead of Normally Open (NO). -> Option A

4. Quick Check:

   Wrong contact type = motor won't start [OK]

Hint: Check contact symbol: |/| means NC, not NO [OK]

Common Mistakes:

• Confusing NC and NO contact symbols
• Assuming coil wiring is always the issue
• Ignoring sensor physical connection

5. You want to design a control circuit where a Normally Open (NO) start button must be pressed to start a machine. Which logic setup correctly uses the NO contact to achieve this?

hard

A. Use the NO contact in series with the motor coil; pressing the button breaks the circuit to start the machine.

B. Use the NO contact in parallel with the motor coil; pressing the button breaks the circuit to start the machine.

C. Use the NO contact in parallel with the motor coil; pressing the button energizes the coil to start the machine.

D. Use the NO contact in series with the motor coil; pressing the button energizes the coil to start the machine.

Solution

1. Step 1: Understand NO contact behavior in start circuit

   A Normally Open start button is open by default, meaning no current flows through it initially (machine OFF).

2. Step 2: Effect of pressing NO start button

   When the NO button is pressed, it closes, allowing current to flow and energizing the motor coil to start the machine.

3. Final Answer:

   Use the NO contact in series with the motor coil; pressing the button energizes the coil to start the machine. -> Option D

4. Quick Check:

   NO series press = coil energized to start [OK]

Hint: NO start button in series energizes coil when pressed [OK]

Common Mistakes:

• Placing NO contact in parallel for start function
• Assuming pressing NO button breaks circuit to start
• Confusing NO and NC contacts in control circuits