Normally closed (NC) contact in PLC Programming

Introduction

A normally closed (NC) contact is used to control machines by allowing current to flow when the switch is not pressed. It stops the flow when activated.

To stop a machine when a safety button is pressed.

To keep a circuit active until a sensor detects something.

To turn off a motor when a door is opened.

To create a fail-safe stop in an emergency system.

Syntax

PLC Programming

NC_contact(input) = NOT input

The NC contact is true (closed) when the input is false (off).

It acts like a switch that is closed until pressed or activated.

Examples

This means the contact is closed when the StartButton is not pressed.

PLC Programming

NC_contact(StartButton) = NOT StartButton

The motor runs only if the EmergencyStop button is not pressed.

PLC Programming

IF NC_contact(EmergencyStop) THEN Motor = ON ELSE Motor = OFF

Sample Program

This script shows how a normally closed contact works. When EmergencyStop is not pressed (False), the motor runs (True). When EmergencyStop is pressed (True), the motor stops (False).

PLC Programming

EmergencyStop = False
Motor = False

# Normally closed contact logic
if not EmergencyStop:
    Motor = True
else:
    Motor = False

print(f"EmergencyStop pressed: {EmergencyStop}")
print(f"Motor running: {Motor}")

# Now simulate pressing EmergencyStop
EmergencyStop = True
if not EmergencyStop:
    Motor = True
else:
    Motor = False

print(f"EmergencyStop pressed: {EmergencyStop}")
print(f"Motor running: {Motor}")

Important Notes

NC contacts are often used for safety to stop machines quickly.

Remember, NC means the contact is closed when the input is off.

Summary

NC contact is closed when input is off.

Used to stop machines safely.

Acts like a switch that opens when pressed.

Practice

1. What does a Normally Closed (NC) contact do in a PLC circuit?

easy

A. It allows current to flow when the input is OFF.

B. It allows current to flow only when the input is ON.

C. It always blocks current regardless of input.

D. It acts like a fuse that breaks the circuit permanently.

Solution

1. Step 1: Understand NC contact behavior

   A Normally Closed contact is closed (conducts electricity) when the input is OFF.

2. Step 2: Apply to PLC circuit

   This means current flows through the NC contact when the input is not activated.

3. Final Answer:

   It allows current to flow when the input is OFF. -> Option A

4. Quick Check:

   NC contact closed when input OFF = B [OK]

Hint: NC contact is closed when input is OFF, open when ON [OK]

Common Mistakes:

• Confusing NC with Normally Open (NO) contact
• Thinking NC contact conducts when input is ON
• Assuming NC contact permanently blocks current

2. Which of the following is the correct way to represent a Normally Closed (NC) contact in a PLC ladder logic diagram?

easy

A. A coil symbol with a slash

B. A contact symbol without any slash or line

C. A normally open push button symbol

D. A contact symbol with a slash or line through it

Solution

1. Step 1: Identify NC contact symbol

   In ladder logic, NC contacts are shown as contacts with a slash or diagonal line through them.

2. Step 2: Compare options

   A contact symbol with a slash or line through it matches this description, while others represent different elements.

3. Final Answer:

   A contact symbol with a slash or line through it -> Option D

4. Quick Check:

   NC contact symbol has slash = C [OK]

Hint: Look for slash on contact symbol for NC contact [OK]

Common Mistakes:

• Choosing coil symbols instead of contact symbols
• Confusing NC with NO contact symbol
• Selecting symbols without slashes for NC

3. Given the following ladder logic snippet with an NC contact labeled X controlling output Y:

--[ /X ]--( Y )--

If input X is OFF, what will be the state of output Y?

medium

A. Output Y will toggle ON and OFF rapidly

B. Output Y will be OFF

C. Output Y will be ON

D. Output Y will be in an error state

Solution

1. Step 1: Understand NC contact behavior with input OFF

   NC contact is closed when input X is OFF, so current flows through it.

2. Step 2: Determine output state

   Since the NC contact is closed, output Y coil is energized and turns ON.

3. Final Answer:

   Output Y will be ON -> Option C

4. Quick Check:

   NC contact closed when input OFF means output ON = A [OK]

Hint: NC contact closed when input OFF energizes output [OK]

Common Mistakes:

• Assuming output is OFF when input is OFF
• Confusing NC with NO contact behavior
• Thinking output toggles without cause

4. You have a ladder logic rung with an NC contact controlling a motor start coil. The motor never stops even when the stop button is pressed. What is the most likely error?

medium

A. The NC contact is wired as a Normally Open (NO) contact by mistake.

B. The motor coil is wired backwards.

C. The stop button is stuck in the ON position.

D. The NC contact is not connected to the correct input.

Solution

1. Step 1: Analyze motor never stopping

   If motor never stops, the stop control is not breaking the circuit as expected.

2. Step 2: Check NC contact wiring

   If the NC contact is wired as a Normally Open (NO) contact by mistake, pressing the stop button will not open the circuit, and the motor will keep running.

3. Final Answer:

   The NC contact is wired as a Normally Open (NO) contact by mistake. -> Option A

4. Quick Check:

   Motor never stops means NC contact wired as NO = D [OK]

Hint: Check if NC contact is wired as NO if stop fails [OK]

Common Mistakes:

• Blaming coil wiring instead of contact wiring
• Assuming button is stuck without checking wiring
• Ignoring wrong contact type

5. In a safety circuit, a Normally Closed (NC) emergency stop button is used to control a machine. Which of the following best explains why NC contacts are preferred for emergency stops?

hard

A. Because NC contacts allow the machine to run even if the button is pressed.

B. Because if wiring fails or power is lost, the circuit opens and stops the machine safely.

C. Because NC contacts are cheaper and easier to install than NO contacts.

D. Because NC contacts keep the machine running continuously without interruption.

Solution

1. Step 1: Understand safety requirement for emergency stop

   Emergency stop must stop machine immediately and safely if pressed or if wiring fails.

2. Step 2: Explain NC contact advantage

   NC contact is closed normally, so if wiring breaks or power is lost, circuit opens and machine stops safely.

3. Final Answer:

   Because if wiring fails or power is lost, the circuit opens and stops the machine safely. -> Option B

4. Quick Check:

   NC contact fails safe by opening circuit = A [OK]

Hint: NC contacts fail safe by opening on wiring failure [OK]

Common Mistakes:

• Thinking NC contacts keep machine running when pressed
• Choosing cost or installation ease over safety
• Confusing NC with NO contact behavior