PLC scan cycle (input scan, program execution, output update) in PLC Programming - Interactive Code Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the code to represent the first step of the PLC scan cycle.

PLC Programming

def plc_scan_cycle():
    # Step 1: [1] inputs
    inputs = read_inputs()
    return inputs

Drag options to blanks, or click blank then click option'

Aexecute

Bscan

Cread

Dupdate

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'execute' or 'update' instead of 'read' for inputs.

The first step in the PLC scan cycle is to read the inputs from the field devices.

2fill in blank

medium

Complete the code to represent the program execution step in the PLC scan cycle.

PLC Programming

def plc_scan_cycle():
    inputs = read_inputs()
    # Step 2: [1] the program logic
    outputs = execute_program(inputs)
    return outputs

Drag options to blanks, or click blank then click option'

Ascan

Bexecute

Cupdate

Dread

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'scan' or 'read' instead of 'execute' for program logic.

The second step is to execute the program logic using the inputs.

3fill in blank

hard

Fix the error in the code to correctly update outputs in the PLC scan cycle.

PLC Programming

def plc_scan_cycle():
    inputs = read_inputs()
    outputs = execute_program(inputs)
    # Step 3: [1] outputs to devices
    write_outputs(outputs)

Drag options to blanks, or click blank then click option'

Aupdate

Bread

Cexecute

Dscan

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'read' or 'write_inputs' instead of 'write_outputs'.

The third step is to update the outputs to the field devices.

4fill in blank

hard

Fill both blanks to complete the PLC scan cycle steps in order.

PLC Programming

def plc_scan_cycle():
    # Step 1: [1] inputs
    inputs = read_inputs()
    # Step 2: [2] program logic
    outputs = execute_program(inputs)
    return outputs

Drag options to blanks, or click blank then click option'

Aread

Bexecute

Cupdate

Dscan

Attempts:

3 left

💡 Hint

Common Mistakes

Mixing the order of reading and executing.

The PLC scan cycle starts by reading inputs, then executing the program logic.

5fill in blank

hard

Fill all three blanks to complete the full PLC scan cycle code.

PLC Programming

def plc_scan_cycle():
    # Step 1: [1] inputs
    inputs = read_inputs()
    # Step 2: [2] program logic
    outputs = execute_program(inputs)
    # Step 3: [3] outputs
    write_outputs(outputs)

Drag options to blanks, or click blank then click option'

Aread

Bexecute

Cupdate

Dscan

Attempts:

3 left

💡 Hint

Common Mistakes

Using wrong verbs or wrong order for steps.

The PLC scan cycle consists of three steps: read inputs, execute program logic, and update outputs.

Practice

1. What is the correct order of the PLC scan cycle steps?

easy

A. Output update, input scan, program execution

B. Input scan, program execution, output update

C. Program execution, input scan, output update

D. Program execution, output update, input scan

Solution

1. Step 1: Understand the PLC scan cycle process

   The PLC first reads all inputs to get the current state of sensors and switches.

2. Step 2: Follow the sequence of operations

   After reading inputs, the PLC runs the user program logic, then updates outputs accordingly.

3. Final Answer:

   Input scan, program execution, output update -> Option B

4. Quick Check:

   Scan cycle order = Input, Program, Output [OK]

Hint: Remember: Inputs first, then logic, then outputs [OK]

Common Mistakes:

• Mixing up the order of program execution and input scan
• Thinking outputs update before program runs
• Assuming outputs update before inputs are scanned

2. Which of the following is the correct syntax to represent the PLC scan cycle steps in order?

easy

A. InputScan(); ProgramExecution(); OutputUpdate();

B. OutputUpdate(); InputScan(); ProgramExecution();

C. ProgramExecution(); OutputUpdate(); InputScan();

D. OutputUpdate(); ProgramExecution(); InputScan();

Solution

1. Step 1: Identify the correct function call order

   The PLC scan cycle functions must be called in the order: InputScan, ProgramExecution, then OutputUpdate.

2. Step 2: Match the syntax with the correct order

   InputScan(); ProgramExecution(); OutputUpdate(); correctly shows the functions in the right sequence with proper syntax.

3. Final Answer:

   <code>InputScan(); ProgramExecution(); OutputUpdate();</code> -> Option A

4. Quick Check:

   Function calls order = InputScan, ProgramExecution, OutputUpdate [OK]

Hint: Functions follow the scan cycle order: input, program, output [OK]

Common Mistakes:

• Placing OutputUpdate before InputScan
• Swapping ProgramExecution and OutputUpdate calls
• Incorrect function call syntax

3. Given the following PLC scan cycle pseudo-code, what will be the output state after one full scan if input sensor is ON?

InputScan(): sensor = ON
ProgramExecution(): if sensor == ON then output = ON else output = OFF
OutputUpdate(): set output device to output

medium

A. Output device state will not change

B. Output device will be OFF

C. Output device will be ON

D. Output device will toggle randomly

Solution

1. Step 1: Analyze input scan step

   The sensor input is read as ON during InputScan.

2. Step 2: Evaluate program execution logic

   Since sensor == ON, the program sets output = ON.

3. Step 3: Understand output update effect

   OutputUpdate sets the output device state to ON based on program logic.

4. Final Answer:

   Output device will be ON -> Option C

5. Quick Check:

   Sensor ON leads to output ON [OK]

Hint: Input ON means output ON after program runs [OK]

Common Mistakes:

• Confusing input and output states
• Ignoring program logic conditions
• Assuming output updates before program execution

4. A PLC program is not updating outputs correctly. The code snippet is:

OutputUpdate()
InputScan()
ProgramExecution()

What is the main problem here?

medium

A. OutputUpdate is called before inputs are scanned and program runs

B. InputScan should be last in the cycle

C. ProgramExecution should be before OutputUpdate only

D. No problem, this order is correct

Solution

1. Step 1: Review the correct PLC scan cycle order

   The correct order is InputScan, ProgramExecution, then OutputUpdate.

2. Step 2: Identify the error in the given code

   OutputUpdate is called first, before inputs are scanned and program logic runs, causing incorrect output updates.

3. Final Answer:

   OutputUpdate is called before inputs are scanned and program runs -> Option A

4. Quick Check:

   OutputUpdate must be last in scan cycle [OK]

Hint: Output update must come after input scan and program execution [OK]

Common Mistakes:

• Calling OutputUpdate too early
• Swapping InputScan and ProgramExecution order
• Assuming any order works for scan cycle

5. You want to ensure a safety output turns OFF immediately when an emergency stop input is pressed. Which scan cycle step should you prioritize to minimize delay?

hard

A. None, PLC scan cycle cannot be changed

B. Program execution to run safety logic faster

C. Output update to apply changes immediately

D. Input scan to detect emergency stop as early as possible

Solution

1. Step 1: Understand the scan cycle timing

   The input scan step reads all inputs at the start of the cycle, so detecting emergency stop early is critical.

2. Step 2: Prioritize input scan for safety

   By ensuring input scan happens promptly, the PLC can detect emergency stop quickly and then run program logic to turn off outputs.

3. Step 3: Output update applies changes but depends on earlier steps

   Output update applies the result but cannot act before inputs are scanned and logic runs.

4. Final Answer:

   Input scan to detect emergency stop as early as possible -> Option D

5. Quick Check:

   Early input scan = faster emergency response [OK]

Hint: Detect emergency input ASAP in input scan step [OK]

Common Mistakes:

• Thinking output update speed alone improves safety
• Ignoring input scan timing importance
• Assuming program execution speed is the only factor