PLC scan cycle (input scan, program execution, output update) in PLC Programming - Mini Project: Build & Apply

PLC Scan Cycle Simulation

📖 Scenario: You are working with a simple PLC (Programmable Logic Controller) system that controls a machine. The PLC works in a cycle: it first reads the inputs, then runs the program logic, and finally updates the outputs.Imagine the inputs are sensors that tell if a button is pressed or not. The program logic decides if a motor should run based on the button state. The outputs control the motor.

🎯 Goal: Build a simple PLC scan cycle simulation in code. You will create the input data, set a threshold for the motor to run, write the logic to check inputs and decide outputs, and finally display the output state.

📋 What You'll Learn

Create a dictionary called inputs with keys 'button1' and 'button2' and boolean values

Create a variable called motor_threshold set to 1

Write code to count how many buttons are pressed and store in pressed_count

Create a dictionary called outputs with key 'motor' set to True if pressed_count is greater or equal to motor_threshold, else False

Print the outputs dictionary

💡 Why This Matters

🌍 Real World

PLC scan cycles are used in factories and machines to continuously monitor sensors and control devices safely and reliably.

💼 Career

Understanding PLC scan cycles is essential for automation technicians and engineers who program and maintain industrial control systems.

1

Create the input dictionary

Create a dictionary called inputs with these exact entries: 'button1': True and 'button2': False.

PLC Programming

# Create the inputs dictionary with button states
# Your code here

Hint

Use curly braces to create a dictionary. The keys are 'button1' and 'button2'. The values are True and False exactly.

2

Set the motor threshold

Create a variable called motor_threshold and set it to 1.

PLC Programming

inputs = {'button1': True, 'button2': False}
# Set motor_threshold to 1
# Your code here

Hint

Just assign the number 1 to the variable motor_threshold.

3

Count pressed buttons

Write code to count how many buttons are pressed (true) in inputs and store the count in a variable called pressed_count. Use a for loop with variables button and state to iterate over inputs.items().

PLC Programming

inputs = {'button1': True, 'button2': False}
motor_threshold = 1
# Count how many buttons are pressed
# Your code here

Hint

Start pressed_count at 0. Loop over inputs.items(). If state is true, add 1 to pressed_count.

4

Set outputs and print

Create a dictionary called outputs with key 'motor'. Set its value to True if pressed_count is greater than or equal to motor_threshold, otherwise False. Then print the outputs dictionary.

PLC Programming

inputs = {'button1': True, 'button2': False}
motor_threshold = 1
pressed_count = 0
for button, state in inputs.items():
    if state:
        pressed_count += 1
# Create outputs dictionary and print it
# Your code here

Hint

Use a comparison to set outputs['motor']. Then print outputs.

Practice

1. What is the correct order of the PLC scan cycle steps?

easy

A. Output update, input scan, program execution

B. Input scan, program execution, output update

C. Program execution, input scan, output update

D. Program execution, output update, input scan

Solution

1. Step 1: Understand the PLC scan cycle process

   The PLC first reads all inputs to get the current state of sensors and switches.

2. Step 2: Follow the sequence of operations

   After reading inputs, the PLC runs the user program logic, then updates outputs accordingly.

3. Final Answer:

   Input scan, program execution, output update -> Option B

4. Quick Check:

   Scan cycle order = Input, Program, Output [OK]

Hint: Remember: Inputs first, then logic, then outputs [OK]

Common Mistakes:

• Mixing up the order of program execution and input scan
• Thinking outputs update before program runs
• Assuming outputs update before inputs are scanned

2. Which of the following is the correct syntax to represent the PLC scan cycle steps in order?

easy

A. InputScan(); ProgramExecution(); OutputUpdate();

B. OutputUpdate(); InputScan(); ProgramExecution();

C. ProgramExecution(); OutputUpdate(); InputScan();

D. OutputUpdate(); ProgramExecution(); InputScan();

Solution

1. Step 1: Identify the correct function call order

   The PLC scan cycle functions must be called in the order: InputScan, ProgramExecution, then OutputUpdate.

2. Step 2: Match the syntax with the correct order

   InputScan(); ProgramExecution(); OutputUpdate(); correctly shows the functions in the right sequence with proper syntax.

3. Final Answer:

   <code>InputScan(); ProgramExecution(); OutputUpdate();</code> -> Option A

4. Quick Check:

   Function calls order = InputScan, ProgramExecution, OutputUpdate [OK]

Hint: Functions follow the scan cycle order: input, program, output [OK]

Common Mistakes:

• Placing OutputUpdate before InputScan
• Swapping ProgramExecution and OutputUpdate calls
• Incorrect function call syntax

3. Given the following PLC scan cycle pseudo-code, what will be the output state after one full scan if input sensor is ON?

InputScan(): sensor = ON
ProgramExecution(): if sensor == ON then output = ON else output = OFF
OutputUpdate(): set output device to output

medium

A. Output device state will not change

B. Output device will be OFF

C. Output device will be ON

D. Output device will toggle randomly

Solution

1. Step 1: Analyze input scan step

   The sensor input is read as ON during InputScan.

2. Step 2: Evaluate program execution logic

   Since sensor == ON, the program sets output = ON.

3. Step 3: Understand output update effect

   OutputUpdate sets the output device state to ON based on program logic.

4. Final Answer:

   Output device will be ON -> Option C

5. Quick Check:

   Sensor ON leads to output ON [OK]

Hint: Input ON means output ON after program runs [OK]

Common Mistakes:

• Confusing input and output states
• Ignoring program logic conditions
• Assuming output updates before program execution

4. A PLC program is not updating outputs correctly. The code snippet is:

OutputUpdate()
InputScan()
ProgramExecution()

What is the main problem here?

medium

A. OutputUpdate is called before inputs are scanned and program runs

B. InputScan should be last in the cycle

C. ProgramExecution should be before OutputUpdate only

D. No problem, this order is correct

Solution

1. Step 1: Review the correct PLC scan cycle order

   The correct order is InputScan, ProgramExecution, then OutputUpdate.

2. Step 2: Identify the error in the given code

   OutputUpdate is called first, before inputs are scanned and program logic runs, causing incorrect output updates.

3. Final Answer:

   OutputUpdate is called before inputs are scanned and program runs -> Option A

4. Quick Check:

   OutputUpdate must be last in scan cycle [OK]

Hint: Output update must come after input scan and program execution [OK]

Common Mistakes:

• Calling OutputUpdate too early
• Swapping InputScan and ProgramExecution order
• Assuming any order works for scan cycle

5. You want to ensure a safety output turns OFF immediately when an emergency stop input is pressed. Which scan cycle step should you prioritize to minimize delay?

hard

A. None, PLC scan cycle cannot be changed

B. Program execution to run safety logic faster

C. Output update to apply changes immediately

D. Input scan to detect emergency stop as early as possible

Solution

1. Step 1: Understand the scan cycle timing

   The input scan step reads all inputs at the start of the cycle, so detecting emergency stop early is critical.

2. Step 2: Prioritize input scan for safety

   By ensuring input scan happens promptly, the PLC can detect emergency stop quickly and then run program logic to turn off outputs.

3. Step 3: Output update applies changes but depends on earlier steps

   Output update applies the result but cannot act before inputs are scanned and logic runs.

4. Final Answer:

   Input scan to detect emergency stop as early as possible -> Option D

5. Quick Check:

   Early input scan = faster emergency response [OK]

Hint: Detect emergency input ASAP in input scan step [OK]

Common Mistakes:

• Thinking output update speed alone improves safety
• Ignoring input scan timing importance
• Assuming program execution speed is the only factor