Normally closed (NC) contact in PLC Programming - Interactive Code Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the code to represent a normally closed (NC) contact in ladder logic.

PLC Programming

LD [1]

Drag options to blanks, or click blank then click option'

AOTE

BXIC

CXIO

DTON

Attempts:

3 left

💡 Hint

Common Mistakes

Using XIC instead of XIO for normally closed contact.

Confusing output instructions like OTE with contacts.

The XIO instruction represents a normally closed (NC) contact in ladder logic.

2fill in blank

medium

Complete the code to check if an input is NOT active using a normally closed contact.

PLC Programming

LD [1] Input1

Drag options to blanks, or click blank then click option'

AXIO

BXIC

COTE

DTON

Attempts:

3 left

💡 Hint

Common Mistakes

Using XIC which checks if input is on, not off.

Using output instructions instead of contact instructions.

Using XIO checks if the input is NOT active, representing a normally closed contact.

3fill in blank

hard

Fix the error in the code to correctly represent a normally closed contact controlling an output.

PLC Programming

LD [1] Input2
OTE Output1

Drag options to blanks, or click blank then click option'

AXIO

BXIC

CTON

DCTU

Attempts:

3 left

💡 Hint

Common Mistakes

Using XIC instead of XIO for normally closed contact.

Using timer or counter instructions as contacts.

The XIO instruction is needed to represent a normally closed contact before the output.

4fill in blank

hard

Fill both blanks to create a rung with a normally closed contact and an output coil.

PLC Programming

LD [1] Input3
[2] Output2

Drag options to blanks, or click blank then click option'

AXIO

BXIC

COTE

DTON

Attempts:

3 left

💡 Hint

Common Mistakes

Using XIC instead of XIO for the contact.

Using TON instead of OTE for output.

The normally closed contact is XIO and the output coil is OTE.

5fill in blank

hard

Fill all three blanks to create a rung with a normally closed contact, a normally open contact, and an output coil.

PLC Programming

LD [1] Input4
AND [2] Input5
[3] Output3

Drag options to blanks, or click blank then click option'

AXIO

BXIC

COTE

DCTD

Attempts:

3 left

💡 Hint

Common Mistakes

Mixing up XIC and XIO for contacts.

Using CTD instead of OTE for output.

The normally closed contact is XIO, normally open contact is XIC, and output coil is OTE.

Practice

1. What does a Normally Closed (NC) contact do in a PLC circuit?

easy

A. It allows current to flow when the input is OFF.

B. It allows current to flow only when the input is ON.

C. It always blocks current regardless of input.

D. It acts like a fuse that breaks the circuit permanently.

Solution

1. Step 1: Understand NC contact behavior

   A Normally Closed contact is closed (conducts electricity) when the input is OFF.

2. Step 2: Apply to PLC circuit

   This means current flows through the NC contact when the input is not activated.

3. Final Answer:

   It allows current to flow when the input is OFF. -> Option A

4. Quick Check:

   NC contact closed when input OFF = B [OK]

Hint: NC contact is closed when input is OFF, open when ON [OK]

Common Mistakes:

• Confusing NC with Normally Open (NO) contact
• Thinking NC contact conducts when input is ON
• Assuming NC contact permanently blocks current

2. Which of the following is the correct way to represent a Normally Closed (NC) contact in a PLC ladder logic diagram?

easy

A. A coil symbol with a slash

B. A contact symbol without any slash or line

C. A normally open push button symbol

D. A contact symbol with a slash or line through it

Solution

1. Step 1: Identify NC contact symbol

   In ladder logic, NC contacts are shown as contacts with a slash or diagonal line through them.

2. Step 2: Compare options

   A contact symbol with a slash or line through it matches this description, while others represent different elements.

3. Final Answer:

   A contact symbol with a slash or line through it -> Option D

4. Quick Check:

   NC contact symbol has slash = C [OK]

Hint: Look for slash on contact symbol for NC contact [OK]

Common Mistakes:

• Choosing coil symbols instead of contact symbols
• Confusing NC with NO contact symbol
• Selecting symbols without slashes for NC

3. Given the following ladder logic snippet with an NC contact labeled X controlling output Y:

--[ /X ]--( Y )--

If input X is OFF, what will be the state of output Y?

medium

A. Output Y will toggle ON and OFF rapidly

B. Output Y will be OFF

C. Output Y will be ON

D. Output Y will be in an error state

Solution

1. Step 1: Understand NC contact behavior with input OFF

   NC contact is closed when input X is OFF, so current flows through it.

2. Step 2: Determine output state

   Since the NC contact is closed, output Y coil is energized and turns ON.

3. Final Answer:

   Output Y will be ON -> Option C

4. Quick Check:

   NC contact closed when input OFF means output ON = A [OK]

Hint: NC contact closed when input OFF energizes output [OK]

Common Mistakes:

• Assuming output is OFF when input is OFF
• Confusing NC with NO contact behavior
• Thinking output toggles without cause

4. You have a ladder logic rung with an NC contact controlling a motor start coil. The motor never stops even when the stop button is pressed. What is the most likely error?

medium

A. The NC contact is wired as a Normally Open (NO) contact by mistake.

B. The motor coil is wired backwards.

C. The stop button is stuck in the ON position.

D. The NC contact is not connected to the correct input.

Solution

1. Step 1: Analyze motor never stopping

   If motor never stops, the stop control is not breaking the circuit as expected.

2. Step 2: Check NC contact wiring

   If the NC contact is wired as a Normally Open (NO) contact by mistake, pressing the stop button will not open the circuit, and the motor will keep running.

3. Final Answer:

   The NC contact is wired as a Normally Open (NO) contact by mistake. -> Option A

4. Quick Check:

   Motor never stops means NC contact wired as NO = D [OK]

Hint: Check if NC contact is wired as NO if stop fails [OK]

Common Mistakes:

• Blaming coil wiring instead of contact wiring
• Assuming button is stuck without checking wiring
• Ignoring wrong contact type

5. In a safety circuit, a Normally Closed (NC) emergency stop button is used to control a machine. Which of the following best explains why NC contacts are preferred for emergency stops?

hard

A. Because NC contacts allow the machine to run even if the button is pressed.

B. Because if wiring fails or power is lost, the circuit opens and stops the machine safely.

C. Because NC contacts are cheaper and easier to install than NO contacts.

D. Because NC contacts keep the machine running continuously without interruption.

Solution

1. Step 1: Understand safety requirement for emergency stop

   Emergency stop must stop machine immediately and safely if pressed or if wiring fails.

2. Step 2: Explain NC contact advantage

   NC contact is closed normally, so if wiring breaks or power is lost, circuit opens and machine stops safely.

3. Final Answer:

   Because if wiring fails or power is lost, the circuit opens and stops the machine safely. -> Option B

4. Quick Check:

   NC contact fails safe by opening circuit = A [OK]

Hint: NC contacts fail safe by opening on wiring failure [OK]

Common Mistakes:

• Thinking NC contacts keep machine running when pressed
• Choosing cost or installation ease over safety
• Confusing NC with NO contact behavior