Why addressing maps physical wiring to logic in PLC Programming - Test Your Understanding

Practice - 5 Tasks

1fill in blank

easy

Complete the code to assign the correct address to the input.

PLC Programming

input_address = [1]

Drag options to blanks, or click blank then click option'

AI0.0

BQ0.1

CM0.0

DT1

Attempts:

3 left

💡 Hint

Common Mistakes

Using output addresses like Q0.1 for inputs.

Using memory bits like M0.0 instead of physical input addresses.

The input address I0.0 maps the physical input wiring to the logic input in the PLC.

2fill in blank

medium

Complete the code to assign the correct output address.

PLC Programming

output_address = [1]

Drag options to blanks, or click blank then click option'

AI1.0

BT2

CM1.0

DQ0.2

Attempts:

3 left

💡 Hint

Common Mistakes

Using input addresses like I1.0 for outputs.

Using memory bits like M1.0 instead of physical output addresses.

The output address Q0.2 maps the physical output wiring to the logic output in the PLC.

3fill in blank

hard

Fix the error in the address assignment for a memory bit.

PLC Programming

memory_bit = [1]

Drag options to blanks, or click blank then click option'

AQ0.0

BI0.1

CM0.1

DT3

Attempts:

3 left

💡 Hint

Common Mistakes

Confusing memory bits with inputs or outputs.

Using timer addresses like T3 for memory bits.

Memory bits use 'M' prefix and map internal logic bits, not physical I/O.

4fill in blank

hard

Fill both blanks to correctly map input and output addresses.

PLC Programming

input_addr = [1]
output_addr = [2]

Drag options to blanks, or click blank then click option'

AI0.3

BQ0.4

CM0.2

DT4

Attempts:

3 left

💡 Hint

Common Mistakes

Swapping input and output addresses.

Using memory or timer addresses for physical I/O.

I0.3 is a valid input address and Q0.4 is a valid output address in PLC addressing.

5fill in blank

hard

Fill all three blanks to map input, output, and memory addresses correctly.

PLC Programming

input_addr = [1]
output_addr = [2]
memory_addr = [3]

Drag options to blanks, or click blank then click option'

AI1.1

BQ0.5

CM0.3

DT5

Attempts:

3 left

💡 Hint

Common Mistakes

Using timer addresses for physical I/O.

Mixing up memory bits with inputs or outputs.

I1.1 is input, Q0.5 is output, and M0.3 is memory bit address in PLC addressing.

Practice

1. What is the main purpose of addressing in PLC programming?

easy

A. To create backup copies of the program

B. To write complex mathematical formulas

C. To design the user interface of the PLC

D. To link physical wiring to the PLC program logic

Solution

1. Step 1: Understand the role of addressing

   Addressing connects the physical inputs and outputs (wires) to the PLC's internal logic so the program knows which signals to read or control.

2. Step 2: Identify the correct purpose

   Among the options, only linking physical wiring to logic matches the role of addressing.

3. Final Answer:

   To link physical wiring to the PLC program logic -> Option D

4. Quick Check:

   Addressing = Link wiring to logic [OK]

Hint: Addressing connects wires to logic, not UI or backups [OK]

Common Mistakes:

• Confusing addressing with programming math
• Thinking addressing designs user interface
• Assuming addressing is for backups

2. Which of the following is the correct syntax to address a digital input at physical terminal 0 in a PLC program?

easy

A. I0.0

B. Q0.0

C. M0.0

D. V0.0

Solution

1. Step 1: Identify input and output prefixes

   In PLC addressing, I stands for input, Q for output, M for memory, and V is not standard.

2. Step 2: Match physical terminal 0 to input

   Since the question asks for digital input at terminal 0, the correct syntax is I0.0.

3. Final Answer:

   I0.0 -> Option A

4. Quick Check:

   Input address starts with I = I0.0 [OK]

Hint: Inputs start with I, outputs with Q in PLC addresses [OK]

Common Mistakes:

• Using Q for inputs
• Confusing memory bits (M) with physical inputs
• Using non-standard prefixes like V

3. Given the following PLC program snippet:

LD I0.1
AND I0.2
= Q0.0

What will be the output state of Q0.0 if I0.1 is ON and I0.2 is OFF?

medium

A. ON

B. OFF

C. Toggle

D. Error

Solution

1. Step 1: Understand the logic operations

   The program loads input I0.1, ANDs it with I0.2, then sets output Q0.0.

2. Step 2: Evaluate inputs and output

   I0.1 is ON (true), I0.2 is OFF (false). AND operation true AND false = false, so Q0.0 will be OFF.

3. Final Answer:

   OFF -> Option B

4. Quick Check:

   True AND False = False [OK]

Hint: AND is true only if both inputs are ON [OK]

Common Mistakes:

• Assuming output toggles automatically
• Thinking output is ON if one input is ON
• Confusing AND with OR logic

4. A PLC program uses the address I0.3 for an input, but the physical wiring is connected to terminal 4. What is the likely problem?

medium

A. The program will read the wrong input signal

B. The output will be stuck ON

C. The PLC will crash

D. The program will ignore all inputs

Solution

1. Step 1: Understand addressing and wiring mismatch

   If the program reads I0.3 but wiring is on terminal 4, the PLC reads a different physical input than expected.

2. Step 2: Identify the effect of mismatch

   The program will get wrong input data, causing incorrect behavior, but it won't crash or ignore all inputs.

3. Final Answer:

   The program will read the wrong input signal -> Option A

4. Quick Check:

   Address mismatch = wrong input read [OK]

Hint: Address must match wiring terminal to read correct input [OK]

Common Mistakes:

• Thinking PLC crashes on address mismatch
• Assuming output is affected directly
• Believing all inputs are ignored

5. You have a PLC controlling a conveyor belt with a start button wired to input I0.0 and a motor output at Q0.1. To ensure the motor only runs when the start button is pressed and a safety sensor at I0.2 is active, which logic correctly maps the physical wiring to control the motor?

hard

A. LD I0.0
OR I0.2
= Q0.1

B. LD I0.2
AND NOT I0.0
= Q0.1

C. LD I0.0
AND I0.2
= Q0.1

D. LD NOT I0.0
AND I0.2
= Q0.1

Solution

1. Step 1: Understand the control requirements

   The motor should run only if the start button (I0.0) is pressed AND the safety sensor (I0.2) is active.

2. Step 2: Match logic to requirements

   Using AND between I0.0 and I0.2 ensures both conditions must be true to energize Q0.1.

   LD I0.0
   AND I0.2
   = Q0.1

   matches this logic.

3. Final Answer:

   LD I0.0 AND I0.2 = Q0.1 -> Option C

4. Quick Check:

   Start AND Safety = Motor ON [OK]

Hint: Use AND to require both start and safety active [OK]

Common Mistakes:

• Using OR allows motor without safety active
• Using NOT reverses logic incorrectly
• Confusing input addresses for outputs