Dashboard Mode - Smart dimension tool
Goal
Understand how the Smart Dimension tool helps measure and annotate dimensions in a 2D drawing to ensure accurate design specifications.
0
0
Smart dimension tool in Solidworks - Dashboard Guide
Sample Data: Dimensions of a Mechanical Part
| Feature | Measured Dimension (mm) | Specified Dimension (mm) |
|---|---|---|
| Length | 120 | 120 |
| Width | 60 | 60 |
| Hole Diameter | 10 | 10 |
| Slot Length | 30 | 30 |
| Slot Width | 5 | 5 |
| Thickness | 15 | 15 |
Dashboard Components
- KPI Card: Total Features Measured
Formula: Count of features measured = 6
Shows how many dimensions were checked using the Smart Dimension tool. - KPI Card: Dimensions Matching Specification
Formula: Count where Measured Dimension = Specified Dimension = 6
Shows how many dimensions exactly match the design specs. - Bar Chart: Dimension Differences
Formula: Difference = Measured Dimension - Specified Dimension
Visualizes any deviations from specifications for each feature.
All differences are zero, indicating perfect match. - Table: Detailed Dimension Comparison
Shows Feature, Measured Dimension, Specified Dimension, and Difference columns.
Difference calculated as Measured - Specified.
Dashboard Layout
+----------------------+-----------------------+ | Total Features: 6 | Dimensions Matching: 6 | +----------------------+-----------------------+ | | | Bar Chart: Dimension Differences | | | +----------------------------------------------+ | Table: Detailed Dimension Comparison | +----------------------------------------------+
Interactivity
A filter allows selecting specific features (e.g., only holes or slots). When a feature is selected, the KPI cards, bar chart, and table update to show data only for that feature type. This helps focus on specific parts of the design.
Self Check
If you add a filter to show only the 'Hole Diameter' feature, which components update?
- KPI Cards update to show 1 feature measured and 1 dimension matching specification.
- Bar Chart updates to show difference only for 'Hole Diameter'.
- Table updates to show only the row for 'Hole Diameter'.
Key Result
Dashboard shows measured vs specified dimensions using Smart Dimension tool with KPIs, difference chart, and detailed comparison table.