Circle and arc tools in Solidworks - Dashboard Guide

Dashboard Mode - Circle and arc tools

Goal

Understand how to use circle and arc tools in SolidWorks to create precise shapes for 3D modeling.

Sample Data: Circle and Arc Dimensions

Shape	Radius (mm)	Center X (mm)	Center Y (mm)	Start Angle (°)	End Angle (°)
Circle 1	50	0	0
Arc 1	30	100	100	0	90
Arc 2	40	150	50	45	135
Circle 2	20	200	0
Arc 3	25	50	150	180	270

Dashboard Components

• KPI Card: Total Circles
  Formula: Count of rows where Shape contains 'Circle' = 2
• KPI Card: Total Arcs
  Formula: Count of rows where Shape contains 'Arc' = 3
• Bar Chart: Radius by Shape
  X-axis: Shape
  Y-axis: Radius (mm)
  Shows radius size for each circle and arc
• Table: Arc Angles
  Shows Start Angle and End Angle for arcs only
• Pie Chart: Shape Type Distribution
  Shows percentage of circles vs arcs

Dashboard Layout

+----------------+----------------+----------------+
| Total Circles  | Total Arcs     | Pie Chart      |
| (KPI Card)     | (KPI Card)     | (Shape Dist.)  |
+----------------+----------------+----------------+
|                Bar Chart: Radius by Shape           |
|                                                    |
+----------------------------------------------------+
|                Table: Arc Angles                    |
+----------------------------------------------------+

Interactivity

Adding a filter to select only 'Circle' or 'Arc' shapes updates the bar chart, pie chart, and table accordingly. KPI cards update their counts based on the filter selection.

Self Check

If you add a filter to show only arcs, which components update and what changes occur?

• KPI Card: Total Circles updates to 0
• KPI Card: Total Arcs updates to 3
• Bar Chart shows only arcs with their radius values
• Pie Chart shows 100% arcs
• Table shows all arcs with their start and end angles

Key Result

Dashboard showing counts, radius sizes, and angle details of circles and arcs created with SolidWorks tools.

Practice

1. What is the main difference between a circle and an arc in SolidWorks?

easy

A. A circle cannot have a radius dimension.

B. A circle needs three points; an arc needs only one point.

C. An arc is always larger than a circle.

D. A circle is a full 360-degree shape; an arc is only a part of a circle.

Solution

1. Step 1: Understand circle properties

   A circle is a complete round shape with 360 degrees.

2. Step 2: Understand arc properties

   An arc is a segment of a circle, less than 360 degrees.

3. Final Answer:

   A circle is a full 360-degree shape; an arc is only a part of a circle. -> Option D

4. Quick Check:

   Circle = full shape, Arc = partial shape [OK]

Hint: Circle is full round; arc is just a slice [OK]

Common Mistakes:

• Thinking arcs are full circles
• Confusing number of points needed
• Believing arcs are always bigger than circles

2. Which of the following is the correct way to create a circle in SolidWorks?

easy

A. Select center point, then drag to set radius

B. Draw three random points anywhere

C. Draw a line and convert it to a circle

D. Use the arc tool and close it manually

Solution

1. Step 1: Recall circle creation method

   In SolidWorks, you start by selecting the center point.

2. Step 2: Set the radius by dragging

   After the center, dragging sets the circle's radius.

3. Final Answer:

   Select center point, then drag to set radius -> Option A

4. Quick Check:

   Center + drag = circle creation [OK]

Hint: Pick center first, then drag radius [OK]

Common Mistakes:

• Trying to create circle with three random points
• Using arc tool for full circle
• Converting lines to circles incorrectly

3. What will happen if you try to create an arc in SolidWorks by selecting only two points?

medium

A. The arc will be created with default curvature between the points.

B. SolidWorks will show an error because three points are needed.

C. A full circle will be created instead of an arc.

D. The arc will be created but with zero radius.

Solution

1. Step 1: Understand arc creation inputs

   An arc needs start and end points plus curvature control.

2. Step 2: Two points create arc with default curvature

   If only two points are selected, SolidWorks assumes a default curvature to form the arc.

3. Final Answer:

   The arc will be created with default curvature between the points. -> Option A

4. Quick Check:

   Two points = arc with default curve [OK]

Hint: Two points make arc with default curve [OK]

Common Mistakes:

• Believing three points are always required
• Expecting error on two points
• Confusing arc with full circle creation

4. You tried to create a circle but SolidWorks does not let you set the radius. What is the likely cause?

medium

A. You tried to draw the circle outside the sketch plane.

B. You selected the arc tool instead of the circle tool.

C. You did not select the center point first.

D. You forgot to add a dimension after drawing.

Solution

1. Step 1: Check tool selection

   If the arc tool was selected, radius setting behaves differently.

2. Step 2: Confirm center point selection

   Without selecting the center point first, SolidWorks cannot define the circle radius.

3. Final Answer:

   You did not select the center point first. -> Option C

4. Quick Check:

   Center point needed before radius [OK]

Hint: Always pick center point first for circle [OK]

Common Mistakes:

• Using arc tool by mistake
• Trying to draw off the sketch plane
• Assuming dimension is needed before radius

5. You need to create an arc that exactly fits between two points with a specific radius in SolidWorks. Which steps should you follow?

hard

A. Use the circle tool and delete part of it to form an arc.

B. Select the arc tool, pick start and end points, then set the radius dimension.

C. Draw a line between points, convert it to an arc, then set radius.

D. Draw a circle with the radius, then trim it to the two points.

Solution

1. Step 1: Use arc tool with start and end points

   Select the arc tool and click the two points where the arc should start and end.

2. Step 2: Apply radius dimension to control curvature

   Set the radius dimension to define the exact curvature between those points.

3. Final Answer:

   Select the arc tool, pick start and end points, then set the radius dimension. -> Option B

4. Quick Check:

   Arc tool + points + radius dimension = exact arc [OK]

Hint: Arc tool + points + radius dimension for exact arc [OK]

Common Mistakes:

• Trying to trim circles instead of using arc tool
• Converting lines to arcs incorrectly
• Deleting circle parts to make arcs