Alarm system with latching in PLC Programming

Introduction

An alarm system with latching keeps the alarm active even after the problem stops, so you don't miss it.

You want to know if a machine ever had a fault, even if it is fixed later.

You need to alert operators until they manually reset the alarm.

You want to avoid missing short problems that happen quickly.

You want to keep a record of alarms until someone checks them.

Syntax

PLC Programming

ALARM := ALARM OR CONDITION;
IF RESET_BUTTON THEN
  ALARM := FALSE;
END_IF;

ALARM is a memory bit that stays TRUE once set until reset.

CONDITION is the input that triggers the alarm (like a sensor).

Examples

Alarm latches when temperature is high and resets with a button.

PLC Programming

ALARM := ALARM OR (TEMPERATURE_HIGH);
IF RESET THEN
  ALARM := FALSE;
END_IF;

Alarm stays on if pressure is low until reset.

PLC Programming

ALARM := ALARM OR (PRESSURE_LOW);
IF RESET_BUTTON THEN
  ALARM := FALSE;
END_IF;

Sample Program

This program sets ALARM when TEMP_HIGH is TRUE. ALARM stays TRUE until RESET_BTN is pressed to clear it.

PLC Programming

PROGRAM AlarmLatch
VAR
  ALARM : BOOL := FALSE;
  TEMP_HIGH : BOOL := FALSE;
  RESET_BTN : BOOL := FALSE;
END_VAR

// Simulate temperature sensor
TEMP_HIGH := TRUE; // Temperature goes high

// Latching alarm logic
ALARM := ALARM OR TEMP_HIGH;

// Output alarm status
IF ALARM THEN
  // Alarm is active
  ;
END_IF;

// Simulate reset button pressed
RESET_BTN := TRUE;
IF RESET_BTN THEN
  ALARM := FALSE;
END_IF;

// Output alarm status after reset
END_PROGRAM

Important Notes

Latching alarms help avoid missing short faults.

Always provide a manual reset to clear the alarm.

Use OR logic to keep the alarm latched once triggered.

Summary

An alarm with latching stays on after the trigger stops.

Use OR logic to keep the alarm active until reset.

Reset the alarm manually to clear the latched state.

Practice

1.

What does a latching alarm system do in a PLC program?

easy

A. Keeps the alarm ON after the trigger until manually reset

B. Turns the alarm ON only while the trigger is active

C. Automatically resets the alarm after a delay

D. Disables the alarm permanently after one trigger

Solution

1. Step 1: Understand alarm behavior

   A latching alarm stays ON even if the trigger stops, unlike a momentary alarm.

2. Step 2: Identify manual reset role

   The alarm stays latched until a manual reset input clears it.

3. Final Answer:

   Keeps the alarm ON after the trigger until manually reset -> Option A

4. Quick Check:

   Latching alarm = stays ON until reset [OK]

Hint: Latching means alarm stays ON until reset manually [OK]

Common Mistakes:

• Confusing latching with momentary alarms
• Thinking alarm resets automatically
• Assuming alarm disables permanently after trigger

2.

Which of the following is the correct ladder logic expression to latch an alarm ALARM when TRIGGER is true, and reset it when RESET is true?

ALARM = (TRIGGER OR ALARM) AND NOT RESET

easy

A. ALARM = (TRIGGER AND ALARM) OR RESET

B. ALARM = (TRIGGER OR ALARM) AND NOT RESET

C. ALARM = TRIGGER AND NOT ALARM AND RESET

D. ALARM = NOT TRIGGER OR ALARM OR RESET

Solution

1. Step 1: Understand latching logic

   The alarm stays ON if triggered or already latched, unless reset.

2. Step 2: Match expression to logic

   ALARM = (TRIGGER OR ALARM) AND NOT RESET matches: ALARM = (TRIGGER OR ALARM) AND NOT RESET.

3. Final Answer:

   ALARM = (TRIGGER OR ALARM) AND NOT RESET -> Option B

4. Quick Check:

   Latching = OR previous alarm + trigger, AND NOT reset [OK]

Hint: Use OR for latch, AND NOT for reset in logic [OK]

Common Mistakes:

• Using AND instead of OR for latch condition
• Forgetting to invert RESET input
• Mixing AND and OR incorrectly

3.

Given the following PLC code snippet, what is the value of ALARM after these inputs?

ALARM = False
TRIGGER = True
RESET = False

ALARM = (TRIGGER or ALARM) and not RESET

TRIGGER = False
ALARM = (TRIGGER or ALARM) and not RESET

RESET = True
ALARM = (TRIGGER or ALARM) and not RESET

What is the final ALARM value?

medium

A. True

B. Undefined

C. Error

D. False

Solution

1. Step 1: Evaluate first assignment

   ALARM = (True or False) and not False = True and True = True

2. Step 2: Evaluate second assignment

   TRIGGER = False, ALARM = (False or True) and not False = True and True = True

3. Step 3: Evaluate third assignment

   RESET = True, ALARM = (False or True) and not True = True and False = False

4. Final Answer:

   False -> Option D

5. Quick Check:

   Reset clears alarm = False [OK]

Hint: Reset input clears alarm regardless of trigger [OK]

Common Mistakes:

• Ignoring reset input effect
• Assuming alarm stays True after reset
• Confusing OR and AND logic

4.

Identify the error in this PLC latching alarm code snippet:

ALARM = TRIGGER AND NOT RESET
ALARM = ALARM OR TRIGGER

medium

A. The alarm will never reset because reset is ignored in second line

B. The alarm resets correctly but never triggers

C. Syntax error due to missing parentheses

D. No error, code works as intended

Solution

1. Step 1: Analyze first line

   ALARM is set only if TRIGGER is true and RESET is false.

2. Step 2: Analyze second line

   ALARM is overwritten by ALARM OR TRIGGER, ignoring RESET input.

3. Step 3: Effect on reset

   Reset input is ignored after first line, so alarm never clears.

4. Final Answer:

   The alarm will never reset because reset is ignored in second line -> Option A

5. Quick Check:

   Reset ignored after first line = alarm stuck ON [OK]

Hint: Reset must be included in all latch logic lines [OK]

Common Mistakes:

• Overwriting alarm without reset condition
• Assuming OR line resets alarm
• Ignoring order of assignments

5.

You want to design a latching alarm that activates when either TEMP_HIGH or PRESSURE_HIGH is true, and resets only when MANUAL_RESET is true. Which expression correctly implements this?

hard

A. ALARM = (TEMP_HIGH AND PRESSURE_HIGH) AND NOT MANUAL_RESET

B. ALARM = (TEMP_HIGH OR PRESSURE_HIGH) AND MANUAL_RESET

C. ALARM = (TEMP_HIGH OR PRESSURE_HIGH OR ALARM) AND NOT MANUAL_RESET

D. ALARM = (TEMP_HIGH AND PRESSURE_HIGH AND ALARM) OR MANUAL_RESET

Solution

1. Step 1: Understand alarm trigger conditions

   Alarm triggers if TEMP_HIGH or PRESSURE_HIGH is true.

2. Step 2: Include latching behavior

   Alarm stays ON if already latched (ALARM) or triggered.

3. Step 3: Reset condition

   Alarm resets only when MANUAL_RESET is true, so use NOT MANUAL_RESET to keep alarm ON.

4. Final Answer:

   ALARM = (TEMP_HIGH OR PRESSURE_HIGH OR ALARM) AND NOT MANUAL_RESET -> Option C

5. Quick Check:

   Latch = OR triggers + alarm, reset = NOT manual reset [OK]

Hint: Use OR for triggers and latch, AND NOT for reset [OK]

Common Mistakes:

• Using AND instead of OR for triggers
• Reset condition inverted incorrectly
• Missing latch condition in expression