Condition flags (N, Z, C, V) in ARM Architecture - Cheat Sheet & Quick Revision

Recall & Review

beginner

What does the N flag represent in ARM condition flags?

The N flag stands for the Negative flag. It is set to 1 if the result of an operation is negative, indicating the most significant bit is 1.

beginner

What is the purpose of the Z flag in ARM condition flags?

The Z flag is the Zero flag. It is set to 1 if the result of an operation is zero, meaning no bits are set in the result.

intermediate

Explain the C flag in ARM condition flags.

The C flag is the Carry flag. It indicates if an operation resulted in a carry out or borrow in arithmetic, useful for unsigned arithmetic operations.

intermediate

What does the V flag indicate in ARM condition flags?

The V flag is the Overflow flag. It is set when an arithmetic operation results in a signed overflow, meaning the result is too large or too small to fit in the number of bits.

intermediate

How are condition flags used in ARM instructions?

Condition flags are used to decide if certain instructions should execute. For example, instructions can run only if the Zero flag is set or if the Negative flag is clear, enabling conditional execution.

Which ARM condition flag is set when the result of an operation is zero?

A N flag

B Z flag

C C flag

D V flag

The Z flag is set when the result of an operation is zero.

What does the C flag indicate in ARM architecture?

A Carry out or borrow

B Zero result

C Negative result

D Signed overflow

The C flag indicates a carry out or borrow in arithmetic operations.

When is the V flag set in ARM condition flags?

A When there is a carry out

B When the result is zero

C When the result is negative

D When there is a signed overflow

The V flag is set when an operation causes a signed overflow.

If the N flag is set, what does it mean about the result?

A Result is negative

B Result is zero

C Result is positive

D Carry occurred

The N flag being set means the result is negative.

How do ARM instructions use condition flags?

A To store data

B To manage memory

C To decide if instructions execute

D To increase speed

ARM instructions use condition flags to decide whether to execute based on conditions.

Describe the four ARM condition flags (N, Z, C, V) and what each one indicates.

Think about how each flag relates to the result of arithmetic operations.

Explain how condition flags affect the execution of ARM instructions.

Consider why a processor might want to skip or run instructions based on results.

Practice

1. Which condition flag in ARM architecture indicates that the result of an operation is zero?

easy

A. Z flag

B. N flag

C. C flag

D. V flag

Solution

1. Step 1: Understand the meaning of each flag

   The Z flag is set when the result of an operation is zero. The N flag indicates a negative result, C is for carry or borrow, and V is for signed overflow.

2. Step 2: Identify the zero result flag

   Since the question asks for the flag indicating zero result, the correct flag is Z.

3. Final Answer:

   Z flag -> Option A

4. Quick Check:

   Zero result = Z flag [OK]

Hint: Zero result always sets the Z flag [OK]

Common Mistakes:

• Confusing N (negative) with Z (zero)
• Thinking C means zero result
• Mixing V (overflow) with zero flag

2. Which of the following is the correct way to check the Negative flag (N) in ARM assembly condition codes?

easy

A. BMI (Branch if Minus)

B. BEQ (Branch if Equal)

C. BHS (Branch if Higher or Same)

D. BVS (Branch if Overflow Set)

Solution

1. Step 1: Recall ARM condition codes

   BEQ checks Z flag (zero), BMI checks N flag (negative), BHS checks C flag (carry set), and BVS checks V flag (overflow).

2. Step 2: Match the condition code to N flag

   The correct code for checking the Negative flag is BMI (Branch if Minus).

3. Final Answer:

   BMI (Branch if Minus) -> Option A

4. Quick Check:

   Negative flag = BMI [OK]

Hint: BMI always checks the Negative (N) flag [OK]

Common Mistakes:

• Using BEQ for negative instead of zero
• Confusing BHS with N flag
• Mixing BVS (overflow) with negative flag

3. Consider an ARM instruction that adds two 8-bit numbers: 0x7F + 0x01. Which condition flags will be set after this operation?

medium

A. N=0, Z=1, C=0, V=0

B. N=0, Z=0, C=1, V=0

C. N=1, Z=0, C=1, V=1

D. N=1, Z=0, C=0, V=1

Solution

1. Step 1: Calculate the sum and check overflow

   0x7F (127 decimal) + 0x01 (1 decimal) = 128 decimal (0x80). This fits in 8 bits but crosses the positive max for signed 8-bit (127), causing signed overflow.

2. Step 2: Determine flags

   N flag is 1 (MSB of 0x80 is 1, negative result), Z=0 since result is not zero, C=0 because no carry out beyond 8 bits, V=1 because signed overflow occurred.

3. Final Answer:

   N=1, Z=0, C=0, V=1 -> Option D

4. Quick Check:

   Signed overflow sets V=1, no zero or carry [OK]

Hint: Overflow sets V, zero result sets Z, carry sets C [OK]

Common Mistakes:

• Confusing carry with overflow
• Assuming zero flag set for non-zero result
• Misinterpreting negative flag for unsigned sum

4. An ARM instruction adds 0xFF and 0x02 and sets the condition flags. The flags are incorrectly showing C=0. What is the likely error?

medium

A. The addition result was zero, so C should be 0

B. The instruction did not update the condition flags

C. The V flag was set instead of C flag

D. The processor does not support carry flag

Solution

1. Step 1: Analyze the addition and expected flags

   0xFF (255) + 0x02 (2) = 0x101 (257), which exceeds 8 bits, so carry (C) should be set to 1.

2. Step 2: Identify why C flag is 0

   If C=0 incorrectly, likely the instruction did not update the condition flags because the 'S' suffix (e.g., ADDS) was missing, so flags were not changed.

3. Final Answer:

   The instruction did not update the condition flags -> Option B

4. Quick Check:

   Missing 'S' means flags unchanged [OK]

Hint: Use 'S' suffix to update flags after arithmetic [OK]

Common Mistakes:

• Assuming carry flag updates automatically
• Confusing overflow (V) with carry (C)
• Believing processor lacks carry flag

5. You want to write an ARM assembly routine that subtracts two numbers and branches if the result is negative or zero. Which condition flags and branch instructions should you use together?

hard

A. Check V flag with BVC and C flag with BCC, branch if both clear

B. Check C flag with BCS and V flag with BVS, branch if either set

C. Check N flag with BMI and Z flag with BEQ, branch if either set

D. Check Z flag with BNE and N flag with BPL, branch if both clear

Solution

1. Step 1: Identify flags for negative and zero results

   Negative result sets N flag, zero result sets Z flag.

2. Step 2: Choose branch instructions for these flags

   BMI branches if N=1 (negative), BEQ branches if Z=1 (zero). To branch if either negative or zero, use BMI and BEQ together.

3. Final Answer:

   Check N flag with BMI and Z flag with BEQ, branch if either set -> Option C

4. Quick Check:

   Negative = BMI, Zero = BEQ [OK]

Hint: Use BMI for negative and BEQ for zero branches [OK]

Common Mistakes:

• Using BNE instead of BEQ for zero
• Confusing carry or overflow flags for sign checks
• Trying to branch on both flags cleared instead of set