Mesh generation in Solidworks - Cell-by-Cell Formula Trace

Sample Data

This data represents parameters used in mesh generation for a SolidWorks model. 'Element Size' is the desired size of each mesh element, 'Number of Elements' is how many elements are planned, and 'Total Length' is the length of the geometry to mesh. 'Calculated Element Size' will compute the element size based on total length and number of elements. 'Mesh Quality' is a qualitative output based on element size.

Cell	Value
A1	Element Size
B1	5
A2	Number of Elements
B2	20
A3	Total Length
B3	100
A4	Calculated Element Size
B4
A5	Mesh Quality
B5

Formula Trace

=B3/B2

Step 1: B3 / B2

Step 2: 100 / 20

Cell Reference Map

    A           B
1 | Element Size | 5  |
2 | Number of Elements | 20 |
3 | Total Length| 100|
4 | Calculated Element Size|    |
5 | Mesh Quality|    |

Cells B3 (Total Length) and B2 (Number of Elements) are used in the formula to calculate the element size in B4.

Result

    A           B
1 | Element Size | 5  |
2 | Number of Elements | 20 |
3 | Total Length| 100|
4 | Calculated Element Size| 5  |
5 | Mesh Quality| Good|

The calculated element size in B4 is 5, matching the desired element size in B1. Based on this, the mesh quality in B5 is labeled 'Good' indicating the mesh meets expected criteria.

Sheet Trace Quiz - 3 Questions

What does the formula =B3/B2 calculate?

A The total length of the model

B The total number of elements

C The size of each mesh element

D The mesh quality rating

Key Result

Divide total geometry length by number of elements to find element size for mesh generation.

Practice

1. What is the main purpose of mesh generation in SolidWorks simulations?

easy

A. To color the model for better visualization

B. To divide the model into small elements for analysis

C. To create 3D animations of the model

D. To export the model to other software

Solution

1. Step 1: Understand mesh generation concept

   Mesh generation breaks the model into small pieces called elements for detailed analysis.

2. Step 2: Identify the purpose in simulation

   This division allows simulation software to calculate physical behaviors accurately.

3. Final Answer:

   To divide the model into small elements for analysis -> Option B

4. Quick Check:

   Mesh generation = dividing model for analysis [OK]

Hint: Mesh means breaking model into small parts for study [OK]

Common Mistakes:

• Confusing mesh with coloring or animation
• Thinking mesh exports the model
• Assuming mesh is for visual effects only

2. Which of the following is the correct way to describe mesh refinement in SolidWorks?

easy

A. Decreasing element size in important areas for accuracy

B. Increasing element size to speed up simulation

C. Removing mesh elements to simplify the model

D. Changing mesh color to highlight stress zones

Solution

1. Step 1: Understand mesh refinement meaning

   Refinement means making mesh elements smaller in key areas to improve detail.

2. Step 2: Identify correct description

   Decreasing element size in important areas increases accuracy without slowing entire simulation too much.

3. Final Answer:

   Decreasing element size in important areas for accuracy -> Option A

4. Quick Check:

   Refine mesh = smaller elements where needed [OK]

Hint: Refine means smaller elements in key spots [OK]

Common Mistakes:

• Thinking refinement means bigger elements
• Confusing refinement with removing elements
• Mixing mesh color with mesh size

3. Given a mesh with element size set to 5 mm in the whole model and refined to 1 mm in a small area, what is the expected effect on simulation time and accuracy?

medium

A. Simulation time increases and accuracy increases

B. Simulation time increases and accuracy decreases

C. Simulation time stays the same and accuracy decreases

D. Simulation time decreases and accuracy decreases

Solution

1. Step 1: Analyze element size effect on simulation

   Smaller elements increase calculation steps, so simulation time goes up.

2. Step 2: Analyze element size effect on accuracy

   Smaller elements in important areas improve detail and accuracy of results.

3. Final Answer:

   Simulation time increases and accuracy increases -> Option A

4. Quick Check:

   Smaller mesh = longer time + better accuracy [OK]

Hint: Smaller mesh means slower but more accurate [OK]

Common Mistakes:

• Assuming smaller mesh speeds simulation
• Thinking accuracy drops with refinement
• Ignoring local refinement effects

4. You set a mesh element size to 0 mm in SolidWorks. What is the likely outcome?

medium

A. The software will generate the finest possible mesh automatically

B. The mesh will be very coarse with large elements

C. The mesh will ignore the size and use default values

D. An error or warning will occur because 0 mm is invalid

Solution

1. Step 1: Understand valid mesh element sizes

   Mesh element size must be a positive number greater than zero.

2. Step 2: Predict software behavior with invalid input

   Setting 0 mm is invalid and will cause an error or warning to prevent simulation issues.

3. Final Answer:

   An error or warning will occur because 0 mm is invalid -> Option D

4. Quick Check:

   Zero mesh size = error [OK]

Hint: Mesh size cannot be zero, causes error [OK]

Common Mistakes:

• Assuming zero means finest mesh
• Thinking zero defaults to coarse mesh
• Ignoring input validation rules

5. You want to simulate stress on a complex bracket with thin walls and thick base. How should you set up the mesh to get accurate results efficiently?

hard

A. Refine mesh on thick base and keep coarse mesh on thin walls

B. Use a uniform coarse mesh everywhere to save time

C. Refine mesh only on thin walls and keep coarse mesh on thick base

D. Use the finest mesh everywhere regardless of geometry

Solution

1. Step 1: Identify critical areas for stress accuracy

   Thin walls are more likely to have stress concentration and need finer mesh.

2. Step 2: Apply mesh refinement strategy

   Refine mesh on thin walls for accuracy, keep coarse mesh on thick base to save time.

3. Step 3: Avoid unnecessary refinement

   Using finest mesh everywhere increases time without much benefit on thick base.

4. Final Answer:

   Refine mesh only on thin walls and keep coarse mesh on thick base -> Option C

5. Quick Check:

   Refine critical areas, coarse elsewhere = efficient accuracy [OK]

Hint: Refine mesh on thin parts, coarse on thick parts [OK]

Common Mistakes:

• Refining mesh uniformly wastes time
• Refining thick base wastes resources
• Ignoring geometry differences in mesh setup