Applying fixtures (constraints) in Solidworks - Step-by-Step Guide

Introduction

Applying fixtures in SolidWorks fixes parts in place to prevent unwanted movement. This helps simulate real-world conditions by constraining parts during assembly or simulation.

When you want to keep a part fixed while testing forces on other parts in an assembly.

When simulating how a product behaves under load without parts moving freely.

When creating an assembly and you need to lock certain parts to avoid accidental shifts.

When preparing a simulation study that requires some parts to stay stationary.

When defining boundary conditions for stress or motion analysis.

Steps

Step 1: Open

- SolidWorks Simulation tab

Simulation tools become available in the toolbar

Step 2: Click

- Fixtures button in the Simulation toolbar

Fixture PropertyManager opens on the right side

Step 3: Select

- Faces or edges of the part in the graphics area

Selected faces or edges highlight in blue

Step 4: Choose

- Fixture type options in the PropertyManager (e.g., Fixed Geometry)

Fixture type is applied to the selected geometry

Step 5: Click

- OK button in the Fixture PropertyManager

Fixture is added to the simulation study and appears in the Simulation tree

Before vs After

Before

Simulation study has no fixtures; all parts can move freely during analysis

After

Selected faces have fixed geometry fixtures; those parts remain stationary during simulation

Settings Reference

Fixture Type

📍 Fixture PropertyManager

Defines how the selected geometry is constrained during simulation

Default: Fixed Geometry

Selection Filter

📍 Fixture PropertyManager toolbar

Helps select the correct geometry type for applying fixtures

Default: Faces

Common Mistakes

Applying fixtures to the wrong faces or edges

This causes incorrect constraints and unrealistic simulation results

Carefully select the faces that represent the real-world fixed points of the part

Not applying any fixtures before running simulation

Parts will move freely, causing errors or meaningless results

Always apply at least one fixture to fix parts in place before running simulation

Summary

Fixtures lock parts or faces to prevent movement during simulation.

Choose the correct fixture type based on how the part is fixed in real life.

Always apply fixtures before running simulations to get accurate results.

Practice

1.

What is the main purpose of applying fixtures in SolidWorks?

easy

A. To increase the size of parts automatically

B. To add color to parts for better visualization

C. To prevent parts from moving during simulation or assembly

D. To create new parts from existing ones

Solution

1. Step 1: Understand the role of fixtures

   Fixtures are used to hold parts in place so they do not move during analysis or assembly.

2. Step 2: Identify the correct purpose

   Preventing movement is the key function, not changing appearance or size.

3. Final Answer:

   To prevent parts from moving during simulation or assembly -> Option C

4. Quick Check:

   Fixtures stop movement = C [OK]

Hint: Fixtures stop movement, not change appearance or size [OK]

Common Mistakes:

• Confusing fixtures with visual effects
• Thinking fixtures create new parts
• Assuming fixtures resize parts

2.

Which of the following is the correct way to apply a fixed fixture in SolidWorks?

1. Select the face or edge to fix
2. Click 'Fixed Geometry' in the fixture menu
3. Confirm the selection

easy

A. Select face, click 'Move Part', confirm selection

B. Select part, click 'Add Material', confirm selection

C. Select edge, click 'Delete Fixture', confirm selection

D. Select face, click 'Fixed Geometry', confirm selection

Solution

1. Step 1: Identify correct fixture application steps

   Applying a fixed fixture involves selecting the face or edge, then choosing 'Fixed Geometry'.

2. Step 2: Eliminate incorrect options

   Options involving moving parts, deleting fixtures, or adding material are unrelated to applying fixed fixtures.

3. Final Answer:

   Select face, click 'Fixed Geometry', confirm selection -> Option D

4. Quick Check:

   Fixed fixture = Select face + Fixed Geometry [OK]

Hint: Fixed fixture means 'Fixed Geometry' on selected face [OK]

Common Mistakes:

• Choosing options unrelated to fixing parts
• Confusing 'Move Part' with fixing
• Trying to add material instead of fixing

3.

Given a model where a cylindrical face is fixed and a force is applied on the opposite face, what will happen if you apply a Fixed fixture on the cylindrical face?

medium

A. The model will move freely without any restriction

B. The model will not move at the fixed face, and stress will distribute accordingly

C. The force will be ignored and no stress will appear

D. The model will explode due to over-constraint

Solution

1. Step 1: Understand the effect of a fixed fixture

   Fixing the cylindrical face means it cannot move, so forces applied elsewhere cause stress distribution.

2. Step 2: Analyze the options

   Movement is restricted at the fixed face, so The model will not move at the fixed face, and stress will distribute accordingly is correct. The model won't move freely or ignore forces, and it won't explode just from one fixed fixture.

3. Final Answer:

   The model will not move at the fixed face, and stress will distribute accordingly -> Option B

4. Quick Check:

   Fixed face stops movement, stress spreads = A [OK]

Hint: Fixed face means no movement there, stress spreads [OK]

Common Mistakes:

• Thinking the model moves freely despite fixture
• Assuming force is ignored
• Believing the model explodes from simple fixture

4.

In a simulation setup, you applied two conflicting fixtures on the same face: a Fixed fixture and a Roller/Slider fixture. What is the likely issue?

medium

A. The simulation will fail due to over-constraining the face

B. The face will move freely without restriction

C. The fixtures will merge and work correctly

D. The software will ignore both fixtures

Solution

1. Step 1: Understand fixture conflicts

   Applying two conflicting fixtures on the same face causes over-constraint, which the software cannot resolve.

2. Step 2: Identify the outcome

   Over-constraining leads to simulation failure or errors, not free movement or ignoring fixtures.

3. Final Answer:

   The simulation will fail due to over-constraining the face -> Option A

4. Quick Check:

   Conflicting fixtures cause failure = D [OK]

Hint: Avoid applying conflicting fixtures on the same face [OK]

Common Mistakes:

• Assuming fixtures merge automatically
• Thinking face moves freely despite fixtures
• Believing software ignores conflicts silently

5.

You have a complex assembly where multiple parts need to be fixed to simulate load correctly. Which approach best avoids over-constraining the model?

hard

A. Apply fixed fixtures only on the main base part and use appropriate mates for others

B. Fix every part individually to ensure no movement

C. Apply conflicting fixtures on multiple faces to be safe

D. Do not apply any fixtures and rely on gravity

Solution

1. Step 1: Understand over-constraint risks

   Fixing every part or applying conflicting fixtures causes over-constraint and errors.

2. Step 2: Choose best practice

   Fixing the main base part and using mates (constraints) for others restricts movement properly without over-constraining.

3. Final Answer:

   Apply fixed fixtures only on the main base part and use appropriate mates for others -> Option A

4. Quick Check:

   Fix base + mates avoid over-constraint = A [OK]

Hint: Fix base part only, use mates for others [OK]

Common Mistakes:

• Fixing all parts causing over-constraint
• Applying conflicting fixtures
• Ignoring fixtures and relying on gravity