Edge flange and miter flange in Solidworks - Cell-by-Cell Formula Trace

Sample Data

This data shows two sheet metal flange features with their lengths and bend angles.

Cell	Value
A1	Feature
B1	Length (mm)
C1	Angle (degrees)
D1	Result Description
A2	Edge Flange
B2	50
C2	90
D2	Flange bent at 90 degrees along edge
A3	Miter Flange
B3	50
C3	45
D3	Flange bent with miter cut at 45 degrees

Formula Trace

IF(C2=90, "Edge Flange bent at " & C2 & " degrees", IF(C3=45, "Miter Flange bent at " & C3 & " degrees", "Other flange"))

Step 1: C2=90

Step 2: "Edge Flange bent at " & C2 & " degrees"

Step 3: IF(C3=45, "Miter Flange bent at " & C3 & " degrees", "Other flange")

Cell Reference Map

    A       B       C       D
1 |Feature|Length |Angle  |Result
2 |Edge   |  50   |  90   |      
3 |Miter  |  50   |  45   |      

Arrows: C2 and C3 feed into the formula to decide flange description.

Cells C2 and C3 are used to check the bend angles for edge and miter flanges.

Result

    A       B       C       D
1 |Feature|Length |Angle  |Result
2 |Edge   |  50   |  90   |Edge Flange bent at 90 degrees
3 |Miter  |  50   |  45   |Miter Flange bent at 45 degrees

The formula outputs the flange description in column D based on the angle values in column C.

Sheet Trace Quiz - 3 Questions

What does the formula check first?

A If the length in B2 is 50

B If the angle in C2 is 90 degrees

C If the angle in C3 is 45 degrees

D If the feature is Edge Flange

Key Result

Nested IF checks conditions in order and returns text based on angle values.

Practice

1. What is the main purpose of an Edge Flange in SolidWorks sheet metal design?

easy

A. To create a hole in the sheet metal

B. To add a bent edge along one side of a sheet metal part

C. To flatten the sheet metal part

D. To weld two parts together

Solution

1. Step 1: Understand Edge Flange function

   An Edge Flange adds a bent edge along one side of a sheet metal part to prepare it for manufacturing.

2. Step 2: Compare options to definition

   Only To add a bent edge along one side of a sheet metal part describes adding a bent edge; others describe unrelated actions.

3. Final Answer:

   To add a bent edge along one side of a sheet metal part -> Option B

4. Quick Check:

   Edge Flange = bent edge addition [OK]

Hint: Edge Flange bends one edge of sheet metal [OK]

Common Mistakes:

• Confusing Edge Flange with hole creation
• Thinking Edge Flange flattens the part
• Mixing Edge Flange with welding

2. Which of the following is the correct syntax to create an Edge Flange in SolidWorks sheet metal feature tree?

easy

A. Right-click sheet metal face > Insert > Edge Flange

B. Right-click sketch > Insert > Miter Flange

C. Right-click part > Insert > Hole Wizard

D. Right-click face > Insert > Fillet

Solution

1. Step 1: Identify correct feature insertion

   Edge Flange is added by right-clicking a sheet metal face and selecting Insert > Edge Flange.

2. Step 2: Eliminate incorrect options

   Options B, C, and D refer to other features or wrong contexts.

3. Final Answer:

   Right-click sheet metal face > Insert > Edge Flange -> Option A

4. Quick Check:

   Edge Flange insertion = Right-click sheet metal face > Insert > Edge Flange [OK]

Hint: Edge Flange inserted from sheet metal face menu [OK]

Common Mistakes:

• Choosing Miter Flange instead of Edge Flange
• Selecting Hole Wizard for flange creation
• Using Fillet instead of flange feature

3. Given a sheet metal part with two adjacent edges, what will happen if you apply a Miter Flange to both edges with a 45° angle?

medium

A. The flanges will connect with a neat mitered corner

B. The edges will be removed

C. The part will flatten automatically

D. The flanges will overlap without corner trimming

Solution

1. Step 1: Understand Miter Flange behavior

   Miter Flange creates connected flanges with neat corner bends by trimming and joining edges.

2. Step 2: Analyze effect of 45° angle on adjacent edges

   Applying 45° Miter Flange on adjacent edges results in a clean mitered corner connection.

3. Final Answer:

   The flanges will connect with a neat mitered corner -> Option A

4. Quick Check:

   Miter Flange = neat corner connection [OK]

Hint: Miter Flange trims and joins edges neatly [OK]

Common Mistakes:

• Assuming flanges overlap without trimming
• Thinking part flattens automatically
• Believing edges get removed

4. You tried to create a Miter Flange but the corner does not form correctly and shows an error. What is the most likely cause?

medium

A. The sheet metal thickness is zero

B. You applied Edge Flange instead of Miter Flange

C. The flange lengths are too short to form a corner

D. The part is not saved

Solution

1. Step 1: Identify common Miter Flange errors

   Miter Flange errors often occur when flange lengths are too short to create a proper corner.

2. Step 2: Evaluate other options

   Edge Flange usage or unsaved part won't cause corner formation errors; zero thickness is invalid but usually caught earlier.

3. Final Answer:

   The flange lengths are too short to form a corner -> Option C

4. Quick Check:

   Miter Flange error = short flange length [OK]

Hint: Check flange length if Miter Flange corner errors occur [OK]

Common Mistakes:

• Confusing Edge Flange with Miter Flange errors
• Ignoring flange length requirements
• Assuming saving the part fixes geometry errors

5. You need to design a sheet metal box with four sides and neat corners using SolidWorks. Which combination of features should you use to create bent edges and clean corner joints?

hard

A. Use Hole Wizard to create corner holes and Edge Flange for sides

B. Use Edge Flange on each side and manually trim corners

C. Use only Base Flange and weld corners later

D. Use Miter Flange on adjacent edges to form connected flanges with mitered corners

Solution

1. Step 1: Identify feature for bent edges and corners

   Miter Flange creates connected flanges with neat mitered corners, ideal for box sides.

2. Step 2: Compare options for efficiency and quality

   Use Miter Flange on adjacent edges to form connected flanges with mitered corners uses Miter Flange to automate corner trimming and connection, better than manual trimming or welding.

3. Final Answer:

   Use Miter Flange on adjacent edges to form connected flanges with mitered corners -> Option D

4. Quick Check:

   Box corners = Miter Flange connection [OK]

Hint: Miter Flange automates neat corner joints for boxes [OK]

Common Mistakes:

• Using Edge Flange without corner trimming
• Relying on welding instead of flanges
• Confusing Hole Wizard with flange features