DXF export for laser cutting in Solidworks - Cell-by-Cell Formula Trace

Sample Data

This table lists parts designed in SolidWorks with their dimensions, material, laser cutting settings, and the corresponding DXF file names exported for laser cutting.

Cell	Value
A1	Part Name
B1	Length (mm)
C1	Width (mm)
D1	Material
E1	Laser Power (W)
F1	Cut Speed (mm/s)
G1	DXF File Name
A2	Bracket
B2	120
C2	80
D2	Steel
E2	1500
F2	20
G2	Bracket_120x80.dxf
A3	CoverPlate
B3	200
C3	150
D3	Aluminum
E3	1200
F3	25
G3	CoverPlate_200x150.dxf

Formula Trace

=CONCATENATE(A2,"_",B2,"x",C2,".dxf")

Step 1: CONCATENATE("Bracket", "_", 120, "x", 80, ".dxf")

Cell Reference Map

    A       B       C       D       E       F       G
1 |Part Name|Length |Width  |Material|Laser P.|Cut Spd.|DXF File
2 |Bracket |  120  |  80   | Steel  | 1500   |  20    |Bracket_120x80.dxf
3 |CoverPlate|  200  |  150  |Aluminum| 1200   |  25    |CoverPlate_200x150.dxf

The formula uses cells A2, B2, and C2 to create the DXF file name in G2 by combining part name and dimensions.

Result

    A       B       C       D       E       F       G
1 |Part Name|Length |Width  |Material|Laser P.|Cut Spd.|DXF File
2 |Bracket |  120  |  80   | Steel  | 1500   |  20    |Bracket_120x80.dxf
3 |CoverPlate|  200  |  150  |Aluminum| 1200   |  25    |CoverPlate_200x150.dxf

The DXF file names in column G are generated by combining the part name and dimensions, ready for laser cutting export.

Sheet Trace Quiz - 3 Questions

What does the formula CONCATENATE(A2,"_",B2,"x",C2,".dxf") produce for the first row?

A 120x80_Bracket.dxf

B Bracket_120x80.dxf

C Bracket_80x120.dxf

D Bracket.dxf

Key Result

CONCATENATE combines text and cell values to create a descriptive file name for export.

Practice

1. What is the main purpose of exporting a DXF file from SolidWorks for laser cutting?

easy

A. To create a simple 2D file that laser cutting machines can read

B. To generate a 3D model for printing

C. To create a video animation of the design

D. To export a spreadsheet of material costs

Solution

1. Step 1: Understand DXF file purpose

   DXF files are 2D vector files used by laser cutters to follow cutting paths.

2. Step 2: Match file type to machine needs

   Laser cutters require 2D outlines, not 3D models or animations.

3. Final Answer:

   To create a simple 2D file that laser cutting machines can read -> Option A

4. Quick Check:

   DXF = 2D file for laser cutting [OK]

Hint: DXF files are always 2D for cutting machines [OK]

Common Mistakes:

• Confusing DXF with 3D model formats
• Thinking DXF includes animations
• Assuming DXF contains cost data

2. Which SolidWorks feature should you export to get a DXF file suitable for laser cutting?

easy

A. Sketch or drawing view

B. Simulation results

C. Assembly file

D. 3D part model

Solution

1. Step 1: Identify exportable features

   DXF export works with 2D sketches or drawing views, not 3D parts or assemblies.

2. Step 2: Select correct feature for laser cutting

   Sketches or drawing views contain 2D outlines needed for cutting paths.

3. Final Answer:

   Sketch or drawing view -> Option A

4. Quick Check:

   Export 2D sketch or drawing for DXF [OK]

Hint: Export sketches or drawings, not 3D parts [OK]

Common Mistakes:

• Trying to export 3D parts directly as DXF
• Selecting assemblies instead of sketches
• Exporting simulation data by mistake

3. Given this export setting in SolidWorks: "Export as Entities" checked and "Export as Polylines" unchecked, what will be the likely result in the DXF file?

medium

A. The export will fail with an error

B. The DXF will contain only polylines without separate lines

C. The DXF will contain individual lines and arcs, not joined polylines

D. The DXF will be a 3D file instead of 2D

Solution

1. Step 1: Understand export options

   "Export as Entities" means lines and arcs are exported as separate entities.

2. Step 2: Effect of "Export as Polylines" unchecked

   Without polylines checked, lines/arcs are not joined into polylines.

3. Final Answer:

   The DXF will contain individual lines and arcs, not joined polylines -> Option C

4. Quick Check:

   Entities only = separate lines/arcs [OK]

Hint: Unchecked polylines means separate lines/arcs in DXF [OK]

Common Mistakes:

• Assuming polylines are created automatically
• Expecting export failure due to unchecked option
• Confusing 2D DXF with 3D export

4. You exported a DXF from SolidWorks but the laser cutter software reports missing lines. What is the most likely cause?

medium

A. The DXF file was saved in 3D format

B. The sketch was not fully defined or had gaps

C. The export used the wrong file extension

D. The laser cutter software does not support DXF files

Solution

1. Step 1: Check sketch completeness

   Gaps or undefined sketch segments cause missing lines in DXF export.

2. Step 2: Verify file format and software support

   DXF is supported and 2D format is standard; wrong extension or 3D format unlikely cause.

3. Final Answer:

   The sketch was not fully defined or had gaps -> Option B

4. Quick Check:

   Incomplete sketch = missing lines in DXF [OK]

Hint: Check sketch gaps before exporting DXF [OK]

Common Mistakes:

• Blaming file extension instead of sketch quality
• Assuming laser cutter can't read DXF
• Exporting 3D instead of 2D without checking

5. You need to export a DXF for laser cutting a sheet metal part with multiple cutouts. Which approach ensures the DXF file correctly represents all cut paths?

hard

A. Export the assembly file containing the sheet metal part

B. Export the 3D folded part as DXF

C. Export only the base sketch without cutouts

D. Export the flat pattern drawing view with all cutouts visible

Solution

1. Step 1: Understand sheet metal DXF export

   Flat pattern drawing shows all cutouts flattened for laser cutting.

2. Step 2: Avoid exporting 3D or incomplete sketches

   3D folded parts or base sketches without cutouts won't represent all cut paths.

3. Step 3: Assembly export is not suitable for DXF laser cutting

   Assemblies contain multiple parts and are not 2D DXF files.

4. Final Answer:

   Export the flat pattern drawing view with all cutouts visible -> Option D

5. Quick Check:

   Flat pattern = correct DXF for sheet metal [OK]

Hint: Use flat pattern drawing for full cut paths [OK]

Common Mistakes:

• Exporting 3D folded parts instead of flat pattern
• Ignoring cutouts in base sketches
• Trying to export assemblies as DXF