Base flange creation in Solidworks - Cell-by-Cell Formula Trace

Sample Data

Sheet metal parameters for base flange creation: thickness in mm, material type, width and height of the flange.

Cell	Value
A1	Thickness
B1	Material
C1	Width
D1	Height
A2	3
B2	Steel
C2	100
D2	50

Formula Trace

Base Flange Volume = Thickness * Width * Height

Step 1: Thickness * Width * Height

Step 2: 3 * 100 * 50

Cell Reference Map

    A       B       C       D
1 |Thickness|Material|Width  |Height 
2 |   3     | Steel  |  100  |  50   

References: A2 (Thickness), C2 (Width), D2 (Height)

The formula uses thickness from A2, width from C2, and height from D2 to calculate base flange volume.

Result

    A       B       C       D       E
1 |Thickness|Material|Width  |Height |Volume
2 |   3     | Steel  |  100  |  50   |15000

The volume of the base flange is calculated as 15000 cubic millimeters and displayed in cell E2.

Sheet Trace Quiz - 3 Questions

Which cells provide the dimensions used in the base flange volume calculation?

A B2, C2, D2

B A2, C2, D2

C A1, B1, C1

D A2, B2, D2

Key Result

Base flange volume is calculated by multiplying thickness, width, and height.

Practice

1.

What is the primary purpose of the Base Flange feature in SolidWorks sheet metal design?

easy

A. To add holes and cutouts to the sheet metal

B. To create the first flat shape and set the thickness of the sheet metal part

C. To apply colors and textures to the part

D. To assemble multiple parts together

Solution

1. Step 1: Understand the role of Base Flange

   The Base Flange is the initial flat shape that defines the sheet metal part's thickness and profile.

2. Step 2: Identify the correct purpose

   It is not used for holes, colors, or assembly but to create the first sheet metal feature.

3. Final Answer:

   To create the first flat shape and set the thickness of the sheet metal part -> Option B

4. Quick Check:

   Base Flange = first flat shape + thickness [OK]

Hint: Base Flange always starts your sheet metal part [OK]

Common Mistakes:

• Confusing Base Flange with cut or hole features
• Thinking it applies colors or textures
• Assuming it assembles parts

2.

Which of the following is the correct sequence to create a Base Flange in SolidWorks?

1. Create a sketch
2. Select Base Flange/Tab feature
3. Define thickness
4. Add fillets

easy

A. 1, 3, 2, 4

B. 2, 1, 3, 4

C. 1, 2, 3, 4

D. 3, 1, 2, 4

Solution

1. Step 1: Start with sketch creation

   You first create a 2D sketch of the profile you want.

2. Step 2: Use Base Flange/Tab feature

   Then select the Base Flange feature to convert the sketch into sheet metal.

3. Step 3: Define thickness

   Specify the thickness of the sheet metal part.

4. Step 4: Add fillets

   Optionally, add fillets or bends after the base flange is created.

5. Final Answer:

   1, 2, 3, 4 -> Option C

6. Quick Check:

   Sketch -> Base Flange -> Thickness -> Fillets [OK]

Hint: Always start with a sketch before Base Flange [OK]

Common Mistakes:

• Trying to create Base Flange before sketch
• Setting thickness before selecting Base Flange
• Skipping sketch step

3.

Given a square sketch of 100mm x 100mm, if you create a Base Flange with thickness 2mm, what will be the thickness of the resulting sheet metal part?

medium

A. 2mm

B. 102mm

C. 100mm

D. 200mm

Solution

1. Step 1: Understand Base Flange thickness

   The thickness parameter sets the sheet metal thickness, independent of sketch size.

2. Step 2: Apply thickness to the part

   The 2mm thickness means the sheet metal will be 2mm thick, not 100mm or more.

3. Final Answer:

   2mm -> Option A

4. Quick Check:

   Thickness = 2mm, not sketch size [OK]

Hint: Thickness is set in Base Flange, not sketch size [OK]

Common Mistakes:

• Confusing sketch dimensions with thickness
• Adding thickness to sketch length
• Assuming thickness doubles the size

4.

What is the error in this process: You create a sketch, then try to create a Base Flange but the option is greyed out and unavailable. What could be the cause?

medium

A. The sketch is on a 3D face instead of a plane

B. The thickness is set to zero

C. You forgot to save the file

D. The sketch is not closed or fully defined

Solution

1. Step 1: Check sketch completeness

   Base Flange requires a closed, fully defined sketch to create a valid profile.

2. Step 2: Identify why Base Flange is greyed out

   If the sketch is open or incomplete, the feature will be disabled.

3. Final Answer:

   The sketch is not closed or fully defined -> Option D

4. Quick Check:

   Closed sketch needed for Base Flange [OK]

Hint: Ensure sketch is closed before Base Flange [OK]

Common Mistakes:

• Ignoring sketch closure errors
• Assuming saving file enables feature
• Trying to create Base Flange on 3D face

5.

You want to create a sheet metal part with a base flange from a rectangular sketch. The thickness should be 1.5mm, but you also want to add a 5mm bend radius. Which steps correctly achieve this?

hard

A. Create sketch -> Base Flange with 1.5mm thickness -> Edit sheet metal feature to set 5mm bend radius

B. Create sketch -> Base Flange with 5mm thickness -> Add fillet of 1.5mm

C. Create sketch -> Extrude 1.5mm -> Add 5mm fillet

D. Create sketch -> Base Flange with 1.5mm thickness -> Add 5mm fillet manually

Solution

1. Step 1: Create sketch and Base Flange

   Start with a sketch and create Base Flange setting thickness to 1.5mm.

2. Step 2: Set bend radius in sheet metal feature

   Edit the sheet metal feature properties to specify the bend radius as 5mm, which controls bends.

3. Step 3: Avoid manual fillets for bends

   Manual fillets do not control bend radius in sheet metal; use sheet metal settings.

4. Final Answer:

   Create sketch -> Base Flange with 1.5mm thickness -> Edit sheet metal feature to set 5mm bend radius -> Option A

5. Quick Check:

   Thickness + bend radius set in Base Flange feature [OK]

Hint: Set thickness and bend radius in Base Flange feature [OK]

Common Mistakes:

• Confusing fillets with bend radius
• Setting wrong thickness
• Using extrude instead of Base Flange