Unit delay block in Simulink - Mini Project: Build & Apply

Unit Delay Block in Simulink

📖 Scenario: You are working on a simple digital signal processing project. You want to create a system that delays an input signal by one time step. This is useful in many real-world applications like filtering signals or creating feedback loops.

🎯 Goal: Build a Simulink model that uses a Unit Delay block to delay an input signal by one time step and observe the output.

📋 What You'll Learn

Create a Simulink model with an input signal source

Add a Unit Delay block to delay the input by one step

Connect the blocks properly

Display the output signal to verify the delay

💡 Why This Matters

🌍 Real World

Unit Delay blocks are used in digital signal processing, control systems, and simulations to model time delays and memory effects.

💼 Career

Understanding how to use Unit Delay blocks is essential for engineers and data scientists working with time series data, control algorithms, and simulation models.

1

Create the input signal

Create a Simulink model and add a Sine Wave block named inputSignal to generate the input signal.

Simulink

% Add a Sine Wave block named inputSignal
% Your code here

Hint

Use add_block to add a Sine Wave block with the exact name inputSignal.

2

Add the Unit Delay block

Add a Unit Delay block named unitDelay to the model to delay the input signal by one time step.

Simulink

% Add a Unit Delay block named unitDelay
% Your code here

Hint

Use add_block with the exact path for Unit Delay and name it unitDelay.

3

Connect the blocks

Connect the output port of inputSignal to the input port of unitDelay using add_line.

Simulink

% Connect inputSignal output to unitDelay input
% Your code here

Hint

Use add_line with the exact port names 'inputSignal/1' and 'unitDelay/1'.

4

Add output display and run simulation

Add a Scope block named outputScope, connect it to the output of unitDelay, run the simulation, and display the output.

Simulink

% Add a Scope block named outputScope
% Connect unitDelay output to outputScope input
% Run the simulation
% Your code here

Hint

Use add_block to add a Scope named outputScope, connect it with add_line, then run sim(model).

Practice

1. What does the Unit Delay block in Simulink do?

easy

A. Outputs the previous input value, delaying the signal by one step

B. Outputs the current input value without delay

C. Outputs the sum of all past inputs

D. Outputs a random value at each step

Solution

1. Step 1: Understand the function of Unit Delay block

   The Unit Delay block holds the input value and outputs it one time step later, effectively delaying the signal by one step.

2. Step 2: Compare options with the definition

   Only Outputs the previous input value, delaying the signal by one step correctly describes this behavior; others describe different or incorrect behaviors.

3. Final Answer:

   Outputs the previous input value, delaying the signal by one step -> Option A

4. Quick Check:

   Unit Delay = previous input output [OK]

Hint: Remember: Unit Delay outputs last step's input [OK]

Common Mistakes:

• Thinking it outputs current input immediately
• Confusing with blocks that sum inputs
• Assuming it outputs random or initial values only

2. Which of the following is the correct way to set the initial condition of a Unit Delay block in Simulink?

easy

A. Initialize the input signal to zero externally

B. Use a separate Gain block before the Unit Delay

C. Set the 'Initial condition' parameter in the block's dialog box

D. Set the initial condition in the MATLAB workspace only

Solution

1. Step 1: Identify how initial conditions are set in Unit Delay

   The Unit Delay block has a parameter called 'Initial condition' in its dialog box where you specify the output value at the first time step.

2. Step 2: Evaluate the options

   Set the 'Initial condition' parameter in the block's dialog box correctly states this method. Options B, C, and D describe indirect or incorrect ways.

3. Final Answer:

   Set the 'Initial condition' parameter in the block's dialog box -> Option C

4. Quick Check:

   Initial condition set inside block dialog [OK]

Hint: Set initial condition inside Unit Delay block dialog [OK]

Common Mistakes:

• Trying to set initial condition outside the block
• Using other blocks to simulate initial condition
• Assuming MATLAB workspace variable sets it automatically

3. Consider a Unit Delay block with initial condition 0. The input signal over 4 time steps is [1, 3, 5, 7]. What is the output sequence?

medium

A. [1, 3, 5, 7]

B. [0, 1, 3, 5]

C. [1, 1, 3, 5]

D. [0, 0, 1, 3]

Solution

1. Step 1: Understand Unit Delay output behavior

   At each time step, output is the input from the previous step. At step 1, output is initial condition (0).

2. Step 2: Calculate output for each step

   Step 1 output: 0 (initial condition)
   Step 2 output: input at step 1 = 1
   Step 3 output: input at step 2 = 3
   Step 4 output: input at step 3 = 5

3. Final Answer:

   [0, 1, 3, 5] -> Option B

4. Quick Check:

   Output lags input by one step [OK]

Hint: Output is previous input; first output = initial condition [OK]

Common Mistakes:

• Outputting current input instead of previous
• Forgetting initial condition at first step
• Shifting output incorrectly by more than one step

4. You have a Unit Delay block with initial condition 5, but the output starts at 0 instead. What is the likely cause?

medium

A. The initial condition parameter was not set correctly in the block

B. The input signal is zero at the first step

C. The Unit Delay block is connected incorrectly

D. Simulink does not support initial conditions in Unit Delay blocks

Solution

1. Step 1: Analyze the initial condition effect

   The Unit Delay block outputs the initial condition at the first step if set properly.

2. Step 2: Identify why output is zero instead of 5

   If output is zero, likely the initial condition parameter was not set or saved correctly in the block dialog.

3. Final Answer:

   The initial condition parameter was not set correctly in the block -> Option A

4. Quick Check:

   Initial condition must be set inside block [OK]

Hint: Check initial condition parameter inside block dialog [OK]

Common Mistakes:

• Assuming input signal affects initial output
• Thinking connection errors cause initial output zero
• Believing Simulink ignores initial conditions

5. You want to model a system where the output at each step is the sum of the current input and the previous input. How can you use a Unit Delay block to achieve this?

hard

A. Set the initial condition of the Unit Delay block to the sum of inputs

B. Use two Unit Delay blocks in series and sum their outputs

C. Use a Unit Delay block with initial condition zero and multiply by input

D. Add the current input to the output of a Unit Delay block that delays the input by one step

Solution

1. Step 1: Understand the requirement

   The output should be current input plus previous input value.

2. Step 2: Use Unit Delay to get previous input

   A Unit Delay block outputs the previous input. Adding this output to the current input gives the desired sum.

3. Step 3: Evaluate options

   Add the current input to the output of a Unit Delay block that delays the input by one step correctly describes this setup. Options A, B, and D do not produce the required output.

4. Final Answer:

   Add the current input to the output of a Unit Delay block that delays the input by one step -> Option D

5. Quick Check:

   Sum = current input + delayed input [OK]

Hint: Sum current input with Unit Delay output for previous input [OK]

Common Mistakes:

• Using multiple Unit Delay blocks unnecessarily
• Misusing initial condition to store sums
• Multiplying instead of adding signals