Sink blocks (Scope, Display, To Workspace) in Simulink - Interactive Code Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the code to add a Scope block to the Simulink model.

Simulink

add_block('simulink/Sinks/[1]', 'model/Scope1')

Drag options to blanks, or click blank then click option'

AScope

BGain

CTo Workspace

DDisplay

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'Gain' which is not a sink block.

Using 'Display' or 'To Workspace' which are different sink blocks.

The Scope block is added using the path 'simulink/Sinks/Scope'.

2fill in blank

medium

Complete the code to set the variable name for the To Workspace block.

Simulink

set_param('model/To Workspace1', 'VariableName', '[1]')

Drag options to blanks, or click blank then click option'

AoutputData

BscopeData

CinputSignal

DdisplayValue

Attempts:

3 left

💡 Hint

Common Mistakes

Using names that do not reflect output data.

Using names that are not valid MATLAB variable names.

The variable name for the To Workspace block should be set to 'outputData' to store simulation results.

3fill in blank

hard

Fix the error in the code to connect a Display block to the signal line.

Simulink

add_line('model', 'signal1/1', 'Display1/[1]')

Drag options to blanks, or click blank then click option'

AOutput

BOut1

CInput

DIn1

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'Out1' which is an output port, not input.

Using 'Input' or 'Output' which are not valid port names.

The Display block input port is named 'In1', so use 'Display1/In1' to connect the line.

4fill in blank

hard

Fill both blanks to create a To Workspace block and set its SaveFormat parameter.

Simulink

add_block('simulink/Sinks/[1]', 'model/ToWorkspace1'); set_param('model/ToWorkspace1', 'SaveFormat', '[2]')

Drag options to blanks, or click blank then click option'

ATo Workspace

BArray

CStructure

DDisplay

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'Display' instead of 'To Workspace' for the block.

Setting SaveFormat to 'Structure' when 'Array' is required.

The block is 'To Workspace' and the SaveFormat is set to 'Array' to save data as an array.

5fill in blank

hard

Fill all three blanks to add a Scope block, set its number of input ports, and open it.

Simulink

add_block('simulink/Sinks/[1]', 'model/Scope2'); set_param('model/Scope2', 'NumInputPorts', '[2]'); open_system('[3]')

Drag options to blanks, or click blank then click option'

AScope

B2

Cmodel/Scope2

DDisplay

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'Display' instead of 'Scope' for the block.

Setting NumInputPorts to a number without quotes.

Opening the wrong system name.

The block is 'Scope', number of input ports is set to '2', and the system 'model/Scope2' is opened.

Practice

1. Which Simulink sink block is best for showing a live numeric value during simulation?

easy

A. Display block

B. Scope block

C. To Workspace block

D. Gain block

Solution

1. Step 1: Understand the purpose of Display block

   The Display block shows numeric values updating live during simulation.

2. Step 2: Compare with other sink blocks

   Scope shows graphs, To Workspace saves data, Gain modifies signals, so they don't show live numbers directly.

3. Final Answer:

   Display block -> Option A

4. Quick Check:

   Live numeric value = Display block [OK]

Hint: Display shows live numbers; Scope shows graphs [OK]

Common Mistakes:

• Confusing Scope with Display
• Thinking To Workspace shows live values
• Selecting Gain which is not a sink block

2. Which of the following is the correct way to configure a To Workspace block to save data as a structure?

easy

A. Set 'Save format' to 'Array'

B. Set 'Save format' to 'Timeseries'

C. Set 'Save format' to 'Structure with time'

D. Set 'Save format' to 'Matrix'

Solution

1. Step 1: Identify the save format options in To Workspace block

   To Workspace block allows saving data as Array, Structure with time, Timeseries, or Matrix.

2. Step 2: Choose the option that saves data as a structure

   'Structure with time' saves data as a structure containing time and signals.

3. Final Answer:

   Set 'Save format' to 'Structure with time' -> Option C

4. Quick Check:

   Structure save format = 'Structure with time' [OK]

Hint: Structure format is named 'Structure with time' in To Workspace [OK]

Common Mistakes:

• Choosing 'Array' which saves plain arrays
• Confusing 'Timeseries' with structure
• Selecting 'Matrix' which is not a valid option

3. Given this Simulink model snippet:

Signal -> To Workspace block (Save format: Array)

After simulation, what is the format of the saved data in MATLAB workspace?

medium

A. A numeric array containing signal values only

B. A structure with time and signals fields

C. A timeseries object with time and data

D. A cell array with signal data

Solution

1. Step 1: Understand 'Array' save format in To Workspace block

   When 'Array' is selected, only the signal values are saved as a numeric array without time info.

2. Step 2: Compare with other formats

   Structure and Timeseries formats include time; cell arrays are not used here.

3. Final Answer:

   A numeric array containing signal values only -> Option A

4. Quick Check:

   Save format 'Array' = numeric array [OK]

Hint: Array format saves only values, no time info [OK]

Common Mistakes:

• Assuming time is saved with Array format
• Confusing Array with Timeseries
• Expecting a structure instead of array

4. You added a Scope block but see no graph during simulation. What is the most likely cause?

medium

A. The simulation time is zero

B. The Display block is missing

C. The To Workspace block is set to 'Array' format

D. The Scope block is not connected to any signal

Solution

1. Step 1: Check Scope block connection

   Scope requires a connected signal to display data; no connection means no graph.

2. Step 2: Evaluate other options

   Display block absence doesn't affect Scope; To Workspace format doesn't affect Scope display; simulation time zero means no data but usually simulation runs longer.

3. Final Answer:

   The Scope block is not connected to any signal -> Option D

4. Quick Check:

   Scope needs signal connection [OK]

Hint: Scope shows graphs only if connected to signals [OK]

Common Mistakes:

• Thinking Display block affects Scope
• Confusing To Workspace settings with Scope display
• Ignoring signal connections

5. You want to analyze simulation data after running a model. Which sink block should you use to save the data for MATLAB post-processing, and how should you configure it to include time information?

hard

A. Use Scope block; enable data logging

B. Use To Workspace block; set 'Save format' to 'Structure with time'

C. Use Display block; no configuration needed

D. Use To Workspace block; set 'Save format' to 'Array'

Solution

1. Step 1: Identify the sink block for saving data

   To Workspace block is designed to save simulation data to MATLAB workspace for post-processing.

2. Step 2: Choose the save format to include time

   Setting 'Save format' to 'Structure with time' saves both signal data and time stamps.

3. Final Answer:

   Use To Workspace block; set 'Save format' to 'Structure with time' -> Option B

4. Quick Check:

   Save data with time = To Workspace + 'Structure with time' [OK]

Hint: To save with time, use To Workspace + 'Structure with time' [OK]

Common Mistakes:

• Using Display or Scope blocks to save data
• Choosing 'Array' format which lacks time info
• Not configuring save format properly