Memory-to-peripheral transfer in Embedded C - Mini Project: Build & Apply

Memory-to-peripheral transfer

📖 Scenario: You are working on a simple embedded system that needs to send a fixed set of data bytes from memory to a peripheral device. This is a common task in embedded programming where data stored in memory must be transferred to hardware registers to control devices.

🎯 Goal: Build a small program that copies data from a memory array to a peripheral register using a loop. This will help you understand how to move data from memory to a peripheral in embedded C.

📋 What You'll Learn

Create a memory array with exact data bytes

Define a peripheral register as a variable

Use a loop to transfer each byte from memory to the peripheral register

Print the final value of the peripheral register after transfer

💡 Why This Matters

🌍 Real World

Embedded systems often need to send data from memory to hardware devices like sensors, displays, or communication modules. This project simulates that basic transfer.

💼 Career

Understanding memory-to-peripheral data transfer is essential for embedded software developers working on microcontrollers and hardware interfacing.

1

Create the memory data array

Create an unsigned char array called memory_data with these exact bytes: 0x12, 0x34, 0x56, 0x78.

Embedded C

// Create the memory_data array with the exact bytes
// Your code here

Hint

Use curly braces to list the bytes inside the array.

2

Define the peripheral register variable

Define an unsigned char variable called PERIPHERAL_REG and initialize it to 0.

Embedded C

unsigned char memory_data[4] = {0x12, 0x34, 0x56, 0x78};
// Define the peripheral register variable
// Your code here

Hint

Use unsigned char type and set initial value to zero.

3

Transfer data from memory to peripheral

Write a for loop using int i from 0 to 3 that assigns memory_data[i] to PERIPHERAL_REG inside the loop.

Embedded C

unsigned char memory_data[4] = {0x12, 0x34, 0x56, 0x78};
unsigned char PERIPHERAL_REG = 0;
// Transfer each byte from memory_data to PERIPHERAL_REG
// Your code here

Hint

Use a for loop with i from 0 to 3 and assign inside the loop.

4

Print the final peripheral register value

Write a printf statement to print the final value of PERIPHERAL_REG in hexadecimal format with the text: "Final PERIPHERAL_REG value: 0x%02X\n".

Embedded C

unsigned char memory_data[4] = {0x12, 0x34, 0x56, 0x78};
unsigned char PERIPHERAL_REG = 0;
for (int i = 0; i < 4; i++) {
    PERIPHERAL_REG = memory_data[i];
}
// Print the final value of PERIPHERAL_REG
// Your code here

Hint

Use printf with %02X to show two-digit hex value.

Practice

1. What is the main purpose of memory-to-peripheral transfer in embedded systems?

easy

A. To increase the CPU speed during data processing

B. To copy data from one memory location to another memory location

C. To transfer data from a peripheral device back to memory

D. To move data from memory to a device without using the CPU heavily

Solution

1. Step 1: Understand the role of memory-to-peripheral transfer

   This transfer moves data from memory directly to a peripheral device, reducing CPU involvement.

2. Step 2: Compare options with this understanding

   Only To move data from memory to a device without using the CPU heavily correctly describes this purpose; others describe different operations or unrelated concepts.

3. Final Answer:

   To move data from memory to a device without using the CPU heavily -> Option D

4. Quick Check:

   Memory-to-peripheral transfer reduces CPU load = A [OK]

Hint: Memory-to-peripheral means memory to device, not memory to memory [OK]

Common Mistakes:

• Confusing memory-to-peripheral with peripheral-to-memory transfer
• Thinking it increases CPU speed
• Assuming it copies memory internally

2. Which of the following is the correct way to enable memory increment mode in a DMA configuration in embedded C?

easy

A. DMA->CCR &= ~DMA_CCR_MINC;

B. DMA->CCR |= DMA_CCR_MINC;

C. DMA->CCR = DMA_CCR_MINC;

D. DMA->CCR ^= DMA_CCR_MINC;

Solution

1. Step 1: Understand enabling a bit in a register

   To enable memory increment, set the MINC bit using bitwise OR (|=) to keep other bits unchanged.

2. Step 2: Analyze each option

   DMA->CCR |= DMA_CCR_MINC; uses |= which sets the bit correctly. DMA->CCR &= ~DMA_CCR_MINC; clears the bit, C overwrites all bits, D toggles the bit which is unsafe here.

3. Final Answer:

   DMA->CCR |= DMA_CCR_MINC; -> Option B

4. Quick Check:

   Enable bit with |= operator = A [OK]

Hint: Use |= to set bits without changing others [OK]

Common Mistakes:

• Using &= ~ to enable bits (actually disables)
• Assigning directly which clears other bits
• Using ^= which toggles bits unpredictably

3. Given the following code snippet configuring a DMA transfer, what will be the value of the peripheral data register after the transfer completes?

uint16_t data[3] = {10, 20, 30};
DMA->CCR = DMA_CCR_MINC | DMA_CCR_DIR;
DMA->CNDTR = 3;
DMA->CPAR = (uint32_t)&PERIPH->DR;
DMA->CMAR = (uint32_t)data;
// DMA transfer starts and completes

medium

A. 30

B. 10

C. 20

D. 0

Solution

1. Step 1: Understand memory increment and transfer count

   Memory increment is enabled, so DMA reads data[0], data[1], data[2] sequentially, transferring 3 items.

2. Step 2: Determine final peripheral register value

   Each transfer writes to peripheral register. After last transfer, peripheral data register holds last value transferred: data[2] = 30.

3. Final Answer:

   30 -> Option A

4. Quick Check:

   Last transferred value = 30 [OK]

Hint: Peripheral register ends with last memory value sent [OK]

Common Mistakes:

• Assuming peripheral holds first or middle value
• Ignoring memory increment effect
• Confusing transfer count with data index

4. Identify the error in this DMA memory-to-peripheral transfer setup:

DMA->CCR = DMA_CCR_DIR;
DMA->CNDTR = 5;
DMA->CPAR = (uint32_t)&PERIPH->DR;
DMA->CMAR = (uint32_t)data_array;
// Start DMA transfer

medium

A. Memory increment mode is not enabled, so only first data is sent repeatedly

B. Peripheral address is incorrect, should point to memory

C. Transfer count is set too high causing overflow

D. DMA direction bit is cleared, so transfer is peripheral to memory

Solution

1. Step 1: Check memory increment setting

   DMA_CCR_MINC bit is missing, so memory address does not increment during transfer.

2. Step 2: Understand effect of missing memory increment

   Without memory increment, DMA sends the same memory location repeatedly to peripheral, not the full array.

3. Final Answer:

   Memory increment mode is not enabled, so only first data is sent repeatedly -> Option A

4. Quick Check:

   Missing MINC bit causes repeated data = D [OK]

Hint: Always enable memory increment for multiple data items [OK]

Common Mistakes:

• Assuming peripheral address should point to memory
• Thinking transfer count causes overflow here
• Misreading direction bit status

5. You want to transfer a block of 4 bytes from memory to a UART peripheral using DMA. The memory buffer is at address 0x20001000 and the UART data register is at 0x40013804. Which DMA configuration correctly sets the source, destination, and enables memory increment for this transfer?

Options:
A) DMA->CMAR = 0x20001000; DMA->CPAR = 0x40013804; DMA->CCR = DMA_CCR_MINC | DMA_CCR_DIR;
B) DMA->CPAR = 0x20001000; DMA->CMAR = 0x40013804; DMA->CCR = DMA_CCR_MINC;
C) DMA->CPAR = 0x40013804; DMA->CMAR = 0x20001000; DMA->CCR = DMA_CCR_MINC | DMA_CCR_DIR;
D) DMA->CMAR = 0x40013804; DMA->CPAR = 0x20001000; DMA->CCR = DMA_CCR_DIR;

hard

A. DMA->CPAR = 0x40013804; DMA->CMAR = 0x20001000; DMA->CCR = DMA_CCR_MINC | DMA_CCR_DIR;

B. DMA->CPAR = 0x20001000; DMA->CMAR = 0x40013804; DMA->CCR = DMA_CCR_MINC;

C. DMA->CMAR = 0x20001000; DMA->CPAR = 0x40013804; DMA->CCR = DMA_CCR_MINC | DMA_CCR_DIR;

D. DMA->CMAR = 0x40013804; DMA->CPAR = 0x20001000; DMA->CCR = DMA_CCR_DIR;

Solution

1. Step 1: Identify source and destination addresses

   Memory buffer is source (CMAR), peripheral register is destination (CPAR).

2. Step 2: Check DMA direction and memory increment

   DMA_CCR_DIR set means memory-to-peripheral transfer; DMA_CCR_MINC enables memory address increment.

3. Step 3: Match correct option

   DMA->CMAR = 0x20001000; DMA->CPAR = 0x40013804; DMA->CCR = DMA_CCR_MINC | DMA_CCR_DIR; correctly assigns CMAR to memory, CPAR to peripheral, and sets both DIR and MINC bits.

4. Final Answer:

   DMA->CMAR = 0x20001000; DMA->CPAR = 0x40013804; DMA->CCR = DMA_CCR_MINC | DMA_CCR_DIR; -> Option C

5. Quick Check:

   Memory in CMAR, peripheral in CPAR, DIR and MINC set = A [OK]

Hint: Peripheral address in CPAR, memory in CMAR, set DIR and MINC bits [OK]

Common Mistakes:

• Swapping source and destination addresses
• Forgetting to set memory increment bit
• Not setting direction bit for memory-to-peripheral