Practice - 5 Tasks
Answer the questions below
1fill in blank
easyComplete the code to start a linear cutting move to X10 Y20 at feed rate F100.
CNC Programming
G01 X[1] Y20 F100 Drag options to blanks, or click blank then click option'
Attempts:
3 left
💡 Hint
Common Mistakes
Using the Y coordinate value for X.
Using the feed rate value for X.
✗ Incorrect
The command moves the tool linearly to X10 Y20 at feed rate F100. The X coordinate must be 10.
2fill in blank
mediumComplete the code to set the feed rate to 150 for the linear move.
CNC Programming
G01 X30 Y40 F[1] Drag options to blanks, or click blank then click option'
Attempts:
3 left
💡 Hint
Common Mistakes
Confusing feed rate with coordinates.
Using a feed rate value not specified in the instruction.
✗ Incorrect
The feed rate is set by the F word. To set it to 150, use F150.
3fill in blank
hardFix the error in the code to correctly move linearly to X50 Y60 at feed rate 120.
CNC Programming
G01 X[1] Y60 F120 Drag options to blanks, or click blank then click option'
Attempts:
3 left
💡 Hint
Common Mistakes
Swapping X and Y values.
Using the feed rate value as coordinate.
✗ Incorrect
The X coordinate should be 50 to match the instruction. Using 60 or other values is incorrect.
4fill in blank
hardFill both blanks to move linearly to X25 Y35 at feed rate 80.
CNC Programming
G01 X[1] Y[2] F80
Drag options to blanks, or click blank then click option'
Attempts:
3 left
💡 Hint
Common Mistakes
Mixing up X and Y values.
Using values not matching the instruction.
✗ Incorrect
The correct coordinates are X25 and Y35 for the move at feed rate 80.
5fill in blank
hardFill all three blanks to move linearly to X40 Y50 at feed rate 70.
CNC Programming
G01 X[1] Y[2] F[3]
Drag options to blanks, or click blank then click option'
Attempts:
3 left
💡 Hint
Common Mistakes
Swapping coordinate values.
Using incorrect feed rate.
✗ Incorrect
The move is to X40 Y50 at feed rate 70, so blanks are 40, 50, and 70 respectively.