Hexadecimal for register and memory values in ARM Architecture - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is hexadecimal and why is it used in ARM registers and memory values?

Hexadecimal is a base-16 number system using digits 0-9 and letters A-F. It is used because it compactly represents binary data, making it easier to read and write values stored in ARM registers and memory.

beginner

Convert the binary value 1010 1111 to hexadecimal.

The binary 1010 1111 converts to hexadecimal AF. (1010 = A, 1111 = F)

beginner

How many bits does one hexadecimal digit represent?

One hexadecimal digit represents 4 bits (a nibble). This makes it easy to map between binary and hex.

intermediate

Why do ARM programmers prefer hexadecimal notation for memory addresses?

Because hexadecimal shortens long binary addresses into fewer digits, making addresses easier to read, write, and debug.

intermediate

What is the hexadecimal value of the ARM register content 0b110101101011?

First, group bits in 4s from right: 1101 0110 1011. Hex is D6B. (1101 = D, 0110 = 6, 1011 = B)

How many hexadecimal digits are needed to represent an 8-bit byte?

A 8

B 4

C 1

D 2

Each hex digit represents 4 bits, so 8 bits need 2 hex digits.

What is the hexadecimal equivalent of binary 1111 0000?

A F0

B 0F

C FF

D 00

1111 is F and 0000 is 0, so combined hex is F0.

Why is hexadecimal preferred over binary for displaying ARM memory addresses?

A It is shorter and easier to read

B It uses fewer digits than decimal

C It is the native language of ARM processors

D It is easier to convert to octal

Hexadecimal shortens long binary sequences, making addresses easier to read.

What is the decimal value of hexadecimal 1A?

A 10

B 16

C 26

D 20

1A in hex is (1×16) + (10×1) = 26 decimal.

How many bits are represented by the hexadecimal number 3F?

A 2 bits

B 8 bits

C 16 bits

D 4 bits

Each hex digit is 4 bits, so 2 digits represent 8 bits.

Explain why hexadecimal is used to represent register and memory values in ARM architecture.

Think about how binary numbers look and how hex simplifies them.

Describe the steps to convert a binary number to hexadecimal.

Remember the 4-bit to 1 hex digit mapping.

Practice

1. What does the prefix 0x in a value like 0x1A3F indicate in ARM architecture?

easy

A. The value is a binary number

B. The value is in decimal format

C. The value is a memory address

D. The value is in hexadecimal format

Solution

1. Step 1: Understand the prefix meaning

   The prefix 0x is a standard notation used in computing to indicate that the following number is in hexadecimal (base 16) format.

2. Step 2: Differentiate from other formats

   Decimal numbers do not have this prefix, binary numbers use 0b, and memory addresses may or may not use this prefix but the prefix itself means hexadecimal.

3. Final Answer:

   The value is in hexadecimal format -> Option D

4. Quick Check:

   Prefix 0x means hexadecimal [OK]

Hint: Remember 0x means hex, not decimal or binary [OK]

Common Mistakes:

• Confusing 0x with decimal numbers
• Thinking 0x means binary
• Assuming 0x always means memory address

2. Which of the following is the correct way to write the hexadecimal value for decimal 255 in ARM assembly?

easy

A. 0xFF

B. FFx0

C. 255x0

D. 0b11111111

Solution

1. Step 1: Convert decimal 255 to hexadecimal

   Decimal 255 equals hexadecimal FF because 15*16 + 15 = 255.

2. Step 2: Write the correct hexadecimal notation

   Hexadecimal values start with 0x followed by digits and letters A-F, so 0xFF is correct.

3. Final Answer:

   0xFF -> Option A

4. Quick Check:

   Decimal 255 = 0xFF [OK]

Hint: Hex starts with 0x, then hex digits (0-9, A-F) [OK]

Common Mistakes:

• Writing the prefix after the digits
• Using decimal digits without 0x
• Confusing binary prefix 0b with hex

3. Given the ARM register value R0 = 0x1C, what is the decimal equivalent of this value?

medium

A. 12

B. 28

C. 44

D. 31

Solution

1. Step 1: Understand hexadecimal digits

   The value 0x1C has two hex digits: 1 and C. Hex digit C equals decimal 12.

2. Step 2: Calculate decimal value

   Calculate as (1 * 16) + 12 = 16 + 12 = 28.

3. Final Answer:

   28 -> Option B

4. Quick Check:

   0x1C = 28 decimal [OK]

Hint: Multiply first digit by 16, add second digit decimal [OK]

Common Mistakes:

• Treating hex digits as decimal directly
• Ignoring that C = 12 in decimal
• Adding digits without multiplying first by 16

4. An ARM instruction tries to load the value 0xG5 into a register. What is the problem with this hexadecimal value?

medium

A. The value is too large for a register

B. The prefix 0x is missing

C. Hexadecimal digits must be 0-9 or A-F; 'G' is invalid

D. Hexadecimal values cannot be loaded into registers

Solution

1. Step 1: Check valid hexadecimal digits

   Hexadecimal digits include 0-9 and letters A-F only. The letter 'G' is not a valid hex digit.

2. Step 2: Identify the error in the value

   Since 'G' is invalid, the value 0xG5 is not a valid hexadecimal number and will cause an error.

3. Final Answer:

   Hexadecimal digits must be 0-9 or A-F; 'G' is invalid -> Option C

4. Quick Check:

   Hex digits only 0-9, A-F [OK]

Hint: Hex digits only 0-9 and A-F, no other letters [OK]

Common Mistakes:

• Assuming any letter can be hex
• Thinking 0x prefix is missing
• Believing hex values can't be loaded into registers

5. You have a memory address 0x100 storing the value 0x2A. You want to add decimal 10 to this value and store it back. What is the new hexadecimal value stored at 0x100?

hard

A. 0x34

B. 0x3A

C. 0x20

D. 0x2F

Solution

1. Step 1: Convert the original hex value to decimal

   Value at 0x100 is 0x2A. Hex 2A = (2 * 16) + 10 = 32 + 10 = 42 decimal.

2. Step 2: Add decimal 10 to the value

   42 + 10 = 52 decimal.

3. Step 3: Convert the result back to hexadecimal

   52 decimal = 3 * 16 + 4 = 0x34 in hexadecimal.

4. Final Answer:

   0x34 -> Option A

5. Quick Check:

   42 + 10 = 52 decimal = 0x34 hex [OK]

Hint: Convert hex to decimal, add, then convert back to hex [OK]

Common Mistakes:

• Adding hex digits directly without conversion
• Confusing decimal and hex values
• Forgetting to convert result back to hex