Bubble Sort Algorithm in DSA C# - Build from Scratch

Bubble Sort Algorithm

📖 Scenario: You have a list of numbers that are not in order. You want to arrange them from smallest to largest, like sorting books by their height on a shelf.

🎯 Goal: Build a program that uses the Bubble Sort Algorithm to sort a list of numbers in ascending order.

📋 What You'll Learn

Create an integer array called numbers with the exact values: 5, 3, 8, 4, 2

Create an integer variable called n that stores the length of the numbers array

Use nested for loops with variables i and j to implement the bubble sort logic

Swap elements in the numbers array when the current element is greater than the next element

Print the sorted numbers array as a sequence of numbers separated by spaces

💡 Why This Matters

🌍 Real World

Sorting is used in many real-world tasks like organizing data, searching faster, and preparing lists for reports.

💼 Career

Understanding sorting algorithms like bubble sort helps in software development, data analysis, and technical interviews.

1

Create the initial array

Create an integer array called numbers with these exact values: 5, 3, 8, 4, 2

DSA C#

# Your code here

Hint

Use int[] numbers = {5, 3, 8, 4, 2}; to create the array.

2

Add a variable for the array length

Create an integer variable called n and set it to the length of the numbers array using numbers.Length

DSA C#

int[] numbers = {5, 3, 8, 4, 2};
# Your code here

Hint

Use int n = numbers.Length; to get the array size.

3

Implement the bubble sort logic

Use nested for loops with variables i and j to compare and swap elements in the numbers array if the current element is greater than the next element

DSA C#

int[] numbers = {5, 3, 8, 4, 2};
int n = numbers.Length;
# Your code here

Hint

Use two for loops and swap elements when the left one is bigger than the right one.

4

Print the sorted array

Use Console.WriteLine with string.Join(" ", numbers) to print the sorted numbers array separated by spaces

DSA C#

int[] numbers = {5, 3, 8, 4, 2};
int n = numbers.Length;
for (int i = 0; i  numbers[j + 1])
        {
            int temp = numbers[j];
            numbers[j] = numbers[j + 1];
            numbers[j + 1] = temp;
        }
    }
}
# Your code here

Hint

Use Console.WriteLine(string.Join(" ", numbers)); to print the sorted array.

Practice

1. What is the main idea behind the Bubble Sort algorithm?

easy

A. Divide the list into halves and sort each half separately

B. Insert each element into its correct position in a sorted sublist

C. Use a pivot to partition the list into smaller parts

D. Repeatedly swap adjacent elements if they are in the wrong order

Solution

1. Step 1: Understand Bubble Sort process

   Bubble Sort compares adjacent elements and swaps them if they are out of order.

2. Step 2: Identify the correct description

   This swapping of neighbors continues until the list is sorted, which matches Repeatedly swap adjacent elements if they are in the wrong order.

3. Final Answer:

   Repeatedly swap adjacent elements if they are in the wrong order -> Option D

4. Quick Check:

   Bubble Sort = Swap neighbors [OK]

Hint: Bubble Sort swaps neighbors repeatedly until sorted [OK]

Common Mistakes:

• Confusing Bubble Sort with Quick Sort or Merge Sort
• Thinking it divides the list into parts
• Assuming it inserts elements like Insertion Sort

2. Which of the following is the correct syntax to swap two elements arr[i] and arr[i+1] in C# during Bubble Sort?

easy

A. temp = arr[i]; arr[i] = arr[i+1]; arr[i+1] = temp;

B. arr[i] = arr[i+1]; arr[i+1] = arr[i];

C. arr[i], arr[i+1] = arr[i+1], arr[i];

D. swap(arr[i], arr[i+1]);

Solution

1. Step 1: Understand swapping in C#

   C# does not support tuple unpacking or direct swap functions by default, so a temporary variable is needed.

2. Step 2: Identify correct swap syntax

   Using a temporary variable to hold one value, then swapping is correct as in temp = arr[i]; arr[i] = arr[i+1]; arr[i+1] = temp;.

3. Final Answer:

   temp = arr[i]; arr[i] = arr[i+1]; arr[i+1] = temp; -> Option A

4. Quick Check:

   Use temp variable to swap [OK]

Hint: Use a temp variable to swap two elements in C# [OK]

Common Mistakes:

• Trying to swap without a temp variable
• Using Python-style tuple swap syntax
• Assuming a built-in swap function exists

3. What will be the output of the following C# code snippet after applying one full pass of Bubble Sort?

int[] arr = {5, 3, 8, 4};
for (int i = 0; i < arr.Length - 1; i++) {
  if (arr[i] > arr[i + 1]) {
    int temp = arr[i];
    arr[i] = arr[i + 1];
    arr[i + 1] = temp;
  }
}
Console.WriteLine(string.Join(", ", arr));

medium

A. 3, 5, 4, 8

B. 3, 4, 5, 8

C. 5, 3, 4, 8

D. 8, 5, 4, 3

Solution

1. Step 1: Perform one pass of Bubble Sort on array

   Start with arr = [5, 3, 8, 4]. Compare pairs:
   5 > 3? Yes, swap -> [3, 5, 8, 4]
   5 > 8? No swap
   8 > 4? Yes, swap -> [3, 5, 4, 8]

2. Step 2: Final array after one pass

   After one pass, array is [3, 5, 4, 8].

3. Final Answer:

   3, 5, 4, 8 -> Option A

4. Quick Check:

   One pass swaps neighbors to bubble largest to end [OK]

Hint: One pass moves largest element to the end [OK]

Common Mistakes:

• Assuming full sort after one pass
• Not swapping last pair correctly
• Confusing indices in loop

4. Identify the error in this Bubble Sort code snippet and choose the correct fix:

int[] arr = {4, 2, 7, 1};
for (int i = 0; i < arr.Length; i++) {
  for (int j = 0; j < arr.Length; j++) {
    if (arr[j] > arr[j + 1]) {
      int temp = arr[j];
      arr[j] = arr[j + 1];
      arr[j + 1] = temp;
    }
  }
}

medium

A. Change outer loop to i < arr.Length - 1

B. Change inner loop condition to j < arr.Length - 1

C. Remove the inner loop completely

D. Swap arr[i] and arr[j] instead of arr[j] and arr[j+1]

Solution

1. Step 1: Analyze inner loop range

   The inner loop uses j from 0 to arr.Length, but accesses arr[j+1]. This causes out-of-range error when j = arr.Length - 1.

2. Step 2: Fix inner loop condition

   Changing inner loop to j < arr.Length - 1 prevents accessing arr[arr.Length], fixing the error.

3. Final Answer:

   Change inner loop condition to j < arr.Length - 1 -> Option B

4. Quick Check:

   Prevent out-of-range by limiting inner loop [OK]

Hint: Inner loop must stop before last index to avoid errors [OK]

Common Mistakes:

• Not adjusting inner loop range
• Changing outer loop incorrectly
• Misunderstanding which indices to swap

5. Given the array int[] arr = {7, 2, 9, 4, 3}, how many total swaps will Bubble Sort perform to fully sort the array in ascending order?

hard

A. 4

B. 5

C. 6

D. 7

Solution

1. Step 1: Trace swaps during Bubble Sort passes

   Initial array: [7, 2, 9, 4, 3]
   Pass 1:
   7 > 2? Swap -> [2, 7, 9, 4, 3] (1 swap)
   7 > 9? No swap
   9 > 4? Swap -> [2, 7, 4, 9, 3] (2 swaps)
   9 > 3? Swap -> [2, 7, 4, 3, 9] (3 swaps)
   Pass 2:
   2 > 7? No swap
   7 > 4? Swap -> [2, 4, 7, 3, 9] (4 swaps)
   7 > 3? Swap -> [2, 4, 3, 7, 9] (5 swaps)
   Pass 3:
   2 > 4? No swap
   4 > 3? Swap -> [2, 3, 4, 7, 9] (6 swaps)
   Pass 4:
   No swaps needed, array sorted.

2. Step 2: Count total swaps

   Total swaps = 6.

3. Final Answer:

   6 -> Option C

4. Quick Check:

   Count swaps each pass carefully [OK]

Hint: Count swaps each pass until no swaps remain [OK]

Common Mistakes:

• Counting only first pass swaps
• Forgetting swaps in later passes
• Assuming swaps equal number of elements