How to Add Title Block in AutoCAD: Step-by-Step Guide

To add a title block in AutoCAD, insert a predefined block or use a template that contains the title block. You can insert it by typing INSERT in the command line, selecting the title block file, and placing it on your layout or paper space.

Syntax

The main command to add a title block is INSERT. You use it like this:

• INSERT: Opens the insert dialog to choose a block or external file.
• Select the title block block or drawing file.
• Specify the insertion point, scale, and rotation.

This places the title block in your drawing.

autocad

Command: INSERT
Select block or file: title_block.dwg
Specify insertion point: 0,0
Specify scale: 1
Specify rotation angle: 0

Output

Title block inserted at coordinates (0,0) with scale 1 and rotation 0 degrees.

Example

This example shows how to insert a title block saved as a block named TitleBlock in your drawing:

autocad

Command: INSERT
Enter block name or browse to file: TitleBlock
Specify insertion point or [Base point/Scale/Rotate]: 0,0
Specify scale factor or [Copy/Scale/Rotate]: 1
Specify rotation angle: 0

Output

The title block appears at the bottom-left corner of your layout with correct size and orientation.

Common Pitfalls

• Forgetting to load the title block as a block or external file before inserting causes errors.
• Inserting at wrong scale can make the title block too big or small.
• Placing the title block in model space instead of paper space (layout) can cause printing issues.
• Not aligning the insertion point properly can misplace the title block.

Always check your units and insertion point before placing the title block.

autocad

Wrong:
Command: INSERT
Enter block name: TitleBlock
Specify insertion point: 1000,1000
Specify scale: 10

Right:
Command: INSERT
Enter block name: TitleBlock
Specify insertion point: 0,0
Specify scale: 1

Output

Wrong insertion places title block off the visible area and too large; right insertion places it correctly.

Quick Reference

Step	Command/Action	Description
1	INSERT	Open insert dialog to add block or external file
2	Select Title Block	Choose your saved title block block or DWG file
3	Specify Insertion Point	Set where the title block will appear (usually 0,0)
4	Set Scale	Use 1 for actual size unless scaling is needed
5	Set Rotation	Usually 0 degrees for no rotation
6	Place in Paper Space	Insert title block in layout tab for printing

Key Takeaways

Use the INSERT command to add a title block as a block or external file.

Always insert the title block in paper space (layout) for proper printing.

Check insertion point and scale to ensure correct placement and size.

Load your title block block or file before inserting to avoid errors.

Use templates with title blocks for faster drawing setup.