CASE statement in PLC Programming - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is a CASE statement in PLC programming?

A CASE statement lets the program choose one action from many options based on a value. It is like a traffic controller deciding which path to take depending on the signal.

beginner

How does a CASE statement improve program readability compared to multiple IF statements?

CASE statements group all choices clearly in one place. This makes the program easier to read and understand, like a menu showing all options instead of many separate notes.

intermediate

In a CASE statement, what happens if no case matches the value and there is no default case?

If no case matches and no default is set, the program skips the CASE block without doing anything. This can cause unexpected results if not handled properly.

beginner

Write a simple example of a CASE statement that controls a motor speed based on a speed setting variable.

CASE speedSetting OF 0: motorSpeed := 0; // Stop 1: motorSpeed := 100; // Slow 2: motorSpeed := 200; // Medium 3: motorSpeed := 300; // Fast ELSE motorSpeed := 0; // Default stop END_CASE;

intermediate

Why is it good practice to include a default or ELSE case in a CASE statement?

Including a default or ELSE case ensures the program handles unexpected values safely. It acts like a safety net to avoid errors or undefined behavior.

What does a CASE statement do in PLC programming?

A Repeats a block of code multiple times

B Checks if a condition is true or false

C Selects one action from many based on a value

D Stops the program immediately

A CASE statement chooses one action from many options depending on the value it checks.

What keyword is used to handle unexpected values in a CASE statement?

A ELSE or DEFAULT depending on language

B ELSE

C OTHERWISE

D DEFAULT

Different PLC languages use ELSE or DEFAULT to handle unexpected values in CASE statements.

If no case matches and no default is provided, what happens?

A The program crashes

B The first case runs anyway

C An error message shows

D The CASE block is skipped

Without a matching case or default, the CASE block is skipped and no action is taken.

Which of these is a benefit of using CASE over multiple IF statements?

A Easier to read and maintain

B Faster execution speed

C Uses less memory

D Allows nested loops

CASE statements group choices clearly, making code easier to read and maintain.

In the example CASE statement, what happens if speedSetting is 2?

A motorSpeed is set to 0

B motorSpeed is set to 200

C motorSpeed is set to 300

D motorSpeed is set to 100

When speedSetting is 2, motorSpeed is set to 200 according to the CASE example.

Explain how a CASE statement works and why it is useful in PLC programming.

Think about how you choose one option from many in daily life.

Describe the importance of including a default or ELSE case in a CASE statement.

Consider what happens if none of the known options match.

Practice

1. What is the main purpose of a CASE statement in PLC programming?

easy

A. To stop the program execution immediately

B. To repeat a set of instructions multiple times

C. To select one action from many based on a variable's value

D. To declare variables for use in the program

Solution

1. Step 1: Understand the role of CASE statement

   The CASE statement evaluates a variable and chooses one matching action from multiple options.

2. Step 2: Compare with other options

   Repeating instructions is done by loops, declaring variables is separate, and stopping execution is a different command.

3. Final Answer:

   To select one action from many based on a variable's value -> Option C

4. Quick Check:

   CASE statement = Select action by value [OK]

Hint: CASE chooses action based on value, like a traffic signal [OK]

Common Mistakes:

• Confusing CASE with loops
• Thinking CASE declares variables
• Assuming CASE stops program

2. Which of the following is the correct syntax to start a CASE statement in PLC structured text?

easy

A. CASE variable OF

B. SWITCH(variable) {

C. IF variable THEN

D. SELECT variable FROM

Solution

1. Step 1: Recall PLC structured text CASE syntax

   The correct syntax to start a CASE statement is CASE variable OF.

2. Step 2: Eliminate other options

   SWITCH(variable) { is JavaScript style, C is IF statement, D is invalid syntax.

3. Final Answer:

   CASE variable OF -> Option A

4. Quick Check:

   PLC CASE starts with 'CASE variable OF' [OK]

Hint: PLC CASE always uses 'CASE variable OF' to start [OK]

Common Mistakes:

• Using SWITCH instead of CASE
• Confusing IF with CASE
• Writing SELECT instead of CASE

3. Given the following PLC code snippet, what will be the value of output after execution?

CASE input OF
  1: output := 'One';
  2: output := 'Two';
  3: output := 'Three';
ELSE
  output := 'Other';
END_CASE;

If input is 2?

medium

A. 'One'

B. 'Two'

C. 'Three'

D. 'Other'

Solution

1. Step 1: Match input value with CASE options

   The input is 2, so the CASE matches the line 2: output := 'Two';.

2. Step 2: Determine output value

   Since input is 2, output is assigned the string 'Two'.

3. Final Answer:

   'Two' -> Option B

4. Quick Check:

   Input 2 matches case 2, output = 'Two' [OK]

Hint: Match input to CASE label to find output [OK]

Common Mistakes:

• Choosing ELSE output for matching case
• Confusing input 2 with 1 or 3
• Ignoring ELSE clause

4. Identify the error in this CASE statement snippet:

CASE status OF
  0: action := 'Stop';
  1: action := 'Start';
  2 action := 'Pause';
ELSE
  action := 'Unknown';
END_CASE;

medium

A. Missing colon after 2 in third case

B. ELSE clause is not allowed in CASE

C. END_CASE should be ENDCASE

D. Variable 'action' is not declared

Solution

1. Step 1: Check syntax of each CASE line

   The third case line is missing a colon after 2; it should be 2: action := 'Pause';.

2. Step 2: Verify other parts

   ELSE clause is valid, END_CASE is correct syntax, and variable declaration is not shown but not an error here.

3. Final Answer:

   Missing colon after 2 in third case -> Option A

4. Quick Check:

   Each case label needs a colon ':' [OK]

Hint: Each case label must end with ':' [OK]

Common Mistakes:

• Omitting colon after case value
• Thinking ELSE is invalid
• Confusing END_CASE syntax

5. You want to use a CASE statement to control a motor speed setting based on an integer input from 0 to 4, where 0 means 'Stop', 1 means 'Slow', 2 means 'Medium', 3 means 'Fast', and any other value means 'Error'. Which of the following CASE statements correctly implements this logic?

hard

A. CASE speed OF
0: motor_speed := 'Stop';
1: motor_speed := 'Slow';
2: motor_speed := 'Medium';
3: motor_speed := 'Fast';
END_CASE;

B. CASE speed OF
0: motor_speed := 'Stop';
1: motor_speed := 'Slow';
2: motor_speed := 'Medium';
3: motor_speed := 'Fast';
4: motor_speed := 'Error';
END_CASE;

C. CASE speed OF
0: motor_speed := 'Stop';
1: motor_speed := 'Slow';
2: motor_speed := 'Medium';
3: motor_speed := 'Fast';
4: motor_speed := 'Error';
ELSE motor_speed := 'Error';
END_CASE;

D. CASE speed OF
0: motor_speed := 'Stop';
1: motor_speed := 'Slow';
2: motor_speed := 'Medium';
3: motor_speed := 'Fast';
ELSE motor_speed := 'Error';
END_CASE;

Solution

1. Step 1: Check the required mapping

   Values 0 to 3 have specific motor speeds; any other value should set 'Error'.

2. Step 2: Analyze each option

   CASE speed OF 0: motor_speed := 'Stop'; 1: motor_speed := 'Slow'; 2: motor_speed := 'Medium'; 3: motor_speed := 'Fast'; ELSE motor_speed := 'Error'; END_CASE; uses ELSE for all other values, correctly handling unexpected inputs. CASE speed OF 0: motor_speed := 'Stop'; 1: motor_speed := 'Slow'; 2: motor_speed := 'Medium'; 3: motor_speed := 'Fast'; 4: motor_speed := 'Error'; END_CASE; treats 4 as 'Error' but misses ELSE for other values. CASE speed OF 0: motor_speed := 'Stop'; 1: motor_speed := 'Slow'; 2: motor_speed := 'Medium'; 3: motor_speed := 'Fast'; 4: motor_speed := 'Error'; ELSE motor_speed := 'Error'; END_CASE; incorrectly uses a colon after ELSE ('ELSE:'), which is invalid syntax. CASE speed OF 0: motor_speed := 'Stop'; 1: motor_speed := 'Slow'; 2: motor_speed := 'Medium'; 3: motor_speed := 'Fast'; END_CASE; lacks handling for values outside 0-3.

3. Final Answer:

   CASE speed OF 0: motor_speed := 'Stop'; 1: motor_speed := 'Slow'; 2: motor_speed := 'Medium'; 3: motor_speed := 'Fast'; ELSE motor_speed := 'Error'; END_CASE -> Option D

4. Quick Check:

   Use ELSE for unexpected values in CASE [OK]

Hint: Use ELSE to catch all unexpected values in CASE [OK]

Common Mistakes:

• Not using ELSE for unexpected values
• Assigning error to a specific case instead of ELSE
• Missing cases for valid inputs