Parting off operation in CNC Programming - Interactive Code Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the code to start the parting off operation with the correct tool call.

CNC Programming

T[1] M06 ; Tool change to parting tool

Drag options to blanks, or click blank then click option'

A02

B03

C01

D04

Attempts:

3 left

💡 Hint

Common Mistakes

Using the wrong tool number for the parting tool.

Forgetting the M06 command after the tool number.

The parting off tool is usually assigned to tool number 03 in this program.

2fill in blank

medium

Complete the code to set the spindle speed for the parting off operation.

CNC Programming

S[1] M03 ; Set spindle speed and start clockwise rotation

Drag options to blanks, or click blank then click option'

A1000

B1200

C800

D1500

Attempts:

3 left

💡 Hint

Common Mistakes

Setting spindle speed too low causing poor cut quality.

Omitting the M03 command to start spindle rotation.

The spindle speed is set to 1500 RPM for optimal parting off.

3fill in blank

hard

Fix the error in the parting off feed rate command.

CNC Programming

G01 X[1] F[2] ; Linear move with feed rate

Drag options to blanks, or click blank then click option'

A0.5

B1.0

C0.8

D0.2

Attempts:

3 left

💡 Hint

Common Mistakes

Using the same value for X and F which is incorrect.

Setting feed rate too high causing tool damage.

The feed rate should be 0.2 mm/rev for safe parting off operation, and X should be set to 0.5 for the correct cutting position.

4fill in blank

hard

Fill both blanks to complete the parting off move and retract commands.

CNC Programming

G01 X[1] F[2] ; Parting off cut
G00 Z[3] ; Retract tool

Drag options to blanks, or click blank then click option'

A0.0

B0.5

C0.2

D1.0

Attempts:

3 left

💡 Hint

Common Mistakes

Not moving X to 0.0 for complete parting off.

Choosing a feed rate too high for parting off.

The parting off cut moves to X0.0 with feed rate 0.2, then retracts to Z0.0.

5fill in blank

hard

Fill all three blanks to complete the dictionary for parting off parameters.

CNC Programming

params = {'speed': [1], 'feed': [2], 'depth': [3]

Drag options to blanks, or click blank then click option'

A1500

B0.2

C2.5

D1200

Attempts:

3 left

💡 Hint

Common Mistakes

Mixing up feed and depth values.

Using incorrect spindle speed values.

The parameters set spindle speed to 1500 RPM, feed rate to 0.2 mm/rev, and depth to 2.5 mm.

Practice

1. What is the main purpose of a parting off operation in CNC turning?

easy

A. To drill holes in the workpiece

B. To cut a finished piece from the raw stock

C. To polish the surface of the workpiece

D. To measure the length of the stock

Solution

1. Step 1: Understand the definition of parting off

   Parting off is a CNC turning process used to separate a finished part from the raw material.

2. Step 2: Identify the correct operation purpose

   Among the options, only cutting a finished piece from raw stock matches the parting off operation.

3. Final Answer:

   To cut a finished piece from the raw stock -> Option B

4. Quick Check:

   Parting off = Cutting finished piece [OK]

Hint: Parting off always means cutting off the finished part [OK]

Common Mistakes:

• Confusing parting off with drilling or polishing
• Thinking parting off measures stock length
• Assuming parting off smooths surfaces

2. Which of the following is the correct G-code command to start a parting off operation with feed rate control?

easy

A. G71 X20 Z-5 F0.1

B. G00 X20 Z-5 F0.1

C. G71 X20 Z-5 S1000

D. G01 X20 Z-5

Solution

1. Step 1: Identify G-code for parting off with feed rate

   G01 is the linear interpolation command used for controlled feed moves, including parting off, with feed rate control.

2. Step 2: Check options for correct syntax

   G01 X20 Z-5 moves the tool linearly to X20 Z-5 at the current feed rate. G71 is for rough turning cycles, not typically used for simple parting off moves with feed rate control.

3. Final Answer:

   G01 X20 Z-5 -> Option D

4. Quick Check:

   G01 = linear feed move for parting off [OK]

Hint: G01 is used for feed controlled linear moves like parting off [OK]

Common Mistakes:

• Using G00 which is rapid move, not cutting
• Omitting feed rate (F) in parting off
• Confusing spindle speed (S) with feed rate (F)

3. Given the following CNC code snippet for parting off:

G71 X15 Z-3 F0.05
G00 X20 Z0
G71 X15 Z-3 F0.05

What will be the final position of the tool after execution?

medium

A. X15 Z-3

B. X15 Z0

C. X20 Z0

D. X20 Z-3

Solution

1. Step 1: Analyze the G-code sequence

   The first G71 command moves tool to X15 Z-3 with feed. Then G00 moves tool rapidly to X20 Z0.

2. Step 2: Identify final tool position

   The last command G71 X15 Z-3 F0.05 moves the tool to X15 Z-3 with feed. Thus, final position is X15 Z-3.

3. Final Answer:

   X15 Z-3 -> Option A

4. Quick Check:

   Last G71 to X15 Z-3 [OK]

Hint: Final position from last command execution [OK]

Common Mistakes:

• Stopping analysis after the G00 rapid move
• Ignoring the final G71 command
• Confusing rapid positioning with final cut position

4. Identify the error in this parting off CNC code snippet:

G71 X10 Z-2 F
G00 X15 Z0

medium

A. Missing feed rate value after F

B. Incorrect use of G00 command

C. Wrong axis letter used

D. Spindle speed not set

Solution

1. Step 1: Check G71 command syntax

   G71 requires feed rate value after F. Here, F is present but no value is given.

2. Step 2: Verify other commands

   G00 command is correct for rapid move. Axis letters X and Z are valid. Spindle speed is optional here.

3. Final Answer:

   Missing feed rate value after F -> Option A

4. Quick Check:

   F must have a value [OK]

Hint: Always provide a value after F for feed rate [OK]

Common Mistakes:

• Leaving F without a number
• Confusing G00 with cutting move
• Thinking spindle speed is mandatory here

5. You want to part off a piece with a diameter of 30 mm and length 5 mm using G71. Which command correctly sets the tool path for this operation?

hard

A. G71 X30 Z-5 F0.08

B. G71 X15 Z5 F0.08

C. G71 X15 Z-5 F0.08

D. G71 X30 Z5 F0.08

Solution

1. Step 1: Convert diameter to radius for X-axis

   In CNC turning, X value is radius, so diameter 30 mm means X=15 mm.

2. Step 2: Set Z-axis for length and direction

   Length 5 mm is negative Z direction for parting off, so Z=-5.

3. Step 3: Confirm feed rate and syntax

   Feed rate F0.08 is valid. So command is G71 X15 Z-5 F0.08.

4. Final Answer:

   G71 X15 Z-5 F0.08 -> Option C

5. Quick Check:

   X=radius=15, Z=-5 length, feed set [OK]

Hint: X is radius (half diameter), Z negative for parting off length [OK]

Common Mistakes:

• Using diameter instead of radius for X
• Setting Z positive instead of negative
• Omitting feed rate or using wrong sign