Bird
Raised Fist0
CNC Programmingscripting~5 mins

Canned cycle cancel (G80) in CNC Programming

Choose your learning style10 modes available
LearnWhyDeepVisualTryChallengeProjectRecallTime
Introduction

The G80 command stops any active canned cycle in a CNC program. It ensures the machine returns to normal movement after finishing repetitive drilling or milling steps.

After completing a drilling cycle to stop repeating the drill motion.
When switching from a canned cycle to manual or other programmed moves.
To prevent accidental repeated cycles that could damage the workpiece.
Before moving the tool to a new position without repeating the previous cycle.
When ending a sequence of repetitive machining steps safely.
Syntax
CNC Programming
G80
G80 must be used after a canned cycle like G81 (drilling) to cancel it.
It does not require parameters and is a modal command.
Examples
Starts a drilling cycle at X10 Y10, then cancels it with G80.
CNC Programming
G81 X10 Y10 Z-5 R2 F100
G80
Starts a drilling with dwell cycle, then cancels it using G80.
CNC Programming
G82 X20 Y20 Z-5 R1 F80
G80
Sample Program

This program sets absolute positioning and metric units, moves to start, drills at X10 Y10 with G81, then cancels the drilling cycle with G80 before moving to a new position.

CNC Programming
N10 G90 G21
N20 G00 X0 Y0
N30 G81 X10 Y10 Z-5 R2 F100
N40 G80
N50 G00 X50 Y50
N60 M30
OutputSuccess
Important Notes

Always use G80 after canned cycles to avoid unintended repeated operations.

G80 does not move the tool; it only cancels the cycle mode.

Summary

G80 cancels active canned cycles in CNC programming.

Use it after drilling or milling cycles to return to normal moves.

It helps keep the program safe and predictable.

Practice

(1/5)
1. What is the main purpose of the G80 command in CNC programming?
easy
A. To start a drilling cycle
B. To set the spindle speed
C. To cancel any active canned cycle
D. To move the tool to the home position

Solution

  1. Step 1: Understand what a canned cycle is

    Canned cycles automate repetitive machining tasks like drilling or milling.

  2. Step 2: Identify the role of G80

    G80 cancels any active canned cycle to return to normal movement commands.

  3. Final Answer:

    To cancel any active canned cycle -> Option C

  4. Quick Check:

    G80 cancels canned cycles = B [OK]
Hint: G80 always stops canned cycles safely [OK]
Common Mistakes:
  • Thinking G80 starts a cycle
  • Confusing G80 with spindle control
  • Assuming G80 moves the tool
2. Which of the following is the correct syntax to cancel a canned cycle in CNC code?
easy
A. G81
B. G80
C. M30
D. G90

Solution

  1. Step 1: Recall common G-codes for canned cycles

    G81 starts a drilling cycle, G90 sets absolute positioning, M30 ends the program.

  2. Step 2: Identify the cancel command

    G80 is the standard code to cancel any active canned cycle.

  3. Final Answer:

    G80 -> Option B

  4. Quick Check:

    Cancel canned cycle = G80 = A [OK]
Hint: G80 is the cancel code, not G81 or M30 [OK]
Common Mistakes:
  • Using G81 instead of G80
  • Confusing M30 with cycle cancel
  • Mixing positioning codes with cycle cancel
3. Given the CNC program snippet:
G81 X10 Y10 Z-5 R1 F100
G80
G00 X0 Y0

What will the G80 command do here?
medium
A. Cancel the drilling cycle started by G81
B. Move the tool rapidly to X10 Y10
C. Start a drilling cycle at X0 Y0
D. Set feed rate to 80

Solution

  1. Step 1: Analyze the G81 command

    G81 starts a drilling canned cycle at X10 Y10 with depth Z-5.

  2. Step 2: Understand the effect of G80

    G80 cancels the active canned cycle, stopping the drilling cycle.

  3. Final Answer:

    Cancel the drilling cycle started by G81 -> Option A

  4. Quick Check:

    G80 cancels G81 cycle = C [OK]
Hint: G80 always cancels previous canned cycles like G81 [OK]
Common Mistakes:
  • Thinking G80 starts a cycle
  • Confusing G80 with rapid move
  • Misreading feed rate as cycle cancel
4. Identify the error in this CNC code snippet:
G81 X20 Y20 Z-10 F150
G00 X0 Y0
G80
medium
A. No error; code is correct
B. G00 cannot be used after G81
C. G80 must be used immediately after G81 to cancel
D. G80 should come before G00 move

Solution

  1. Step 1: Understand the order of commands

    G81 starts drilling; G80 cancels it. Moves like G00 should happen after cancel.

  2. Step 2: Check the code sequence

    Here, G00 rapid move happens before G80 cancels the cycle, which can cause unexpected behavior.

  3. Final Answer:

    G80 should come before G00 move -> Option D

  4. Quick Check:

    Cancel cycle before moves = A [OK]
Hint: Always cancel canned cycles before rapid moves [OK]
Common Mistakes:
  • Placing G80 after moves
  • Assuming G00 cancels cycles
  • Ignoring command order importance
5. You have a CNC program that drills multiple holes using G81. After finishing, you want to safely move the tool to a new position without drilling. Which sequence correctly cancels the drilling cycle and moves the tool?
hard
A. G81 X30 Y30 Z-5 F120 G80 G00 X50 Y50
B. G00 X50 Y50 G81 X30 Y30 Z-5 F120 G80
C. G80 G81 X30 Y30 Z-5 F120 G00 X50 Y50
D. G81 X30 Y30 Z-5 F120 G00 X50 Y50 G80

Solution

  1. Step 1: Recognize the need to cancel the drilling cycle

    After drilling with G81, G80 must be used to cancel the cycle before moving.

  2. Step 2: Check the sequence of commands

    G81 X30 Y30 Z-5 F120 G80 G00 X50 Y50 cancels the cycle with G80 before moving rapidly with G00, which is correct.

  3. Final Answer:

    G81 X30 Y30 Z-5 F120 G80 G00 X50 Y50 -> Option A

  4. Quick Check:

    Cancel cycle then move = D [OK]
Hint: Cancel cycle (G80) before moving tool (G00) [OK]
Common Mistakes:
  • Moving tool before canceling cycle
  • Starting new cycle before cancel
  • Placing G80 before starting cycle
Recommended

Ready to prove it?

Pass the test and this pattern moves unknown strong while earning +1 Grip toward your certificate.

10 questions~5 mineasy hard