Full circle programming in CNC Programming - Interactive Code Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the code to start a full circle clockwise using G-code.

CNC Programming

G02 X[1] Y0 I10 J0

Drag options to blanks, or click blank then click option'

A0

B10

C20

D-10

Attempts:

3 left

💡 Hint

Common Mistakes

Using 10 instead of 20 for the end X coordinate.

Confusing I and J values for center offsets.

The X coordinate should be 20 to complete a full circle with center offset I10.

2fill in blank

medium

Complete the code to start a full circle counterclockwise using G-code.

CNC Programming

G03 X[1] Y0 I-10 J0

Drag options to blanks, or click blank then click option'

A-10

B0

C20

D-20

Attempts:

3 left

💡 Hint

Common Mistakes

Using -10 instead of -20 for the end X coordinate.

Mixing up clockwise and counterclockwise codes.

The X coordinate should be -20 to complete a full circle counterclockwise with center offset I-10.

3fill in blank

hard

Fix the error in the code to complete a full circle clockwise.

CNC Programming

G02 X[1] Y0 I10 J0

Drag options to blanks, or click blank then click option'

A10

B20

C-10

D0

Attempts:

3 left

💡 Hint

Common Mistakes

Using 10 instead of 20 for the end X coordinate.

Ignoring the center offset I value.

The end X coordinate must be 20 to complete the full circle clockwise with center offset I10.

4fill in blank

hard

Fill both blanks to complete a full circle counterclockwise with center offset.

CNC Programming

G03 X[1] Y[2] I-15 J0

Drag options to blanks, or click blank then click option'

A-30

B0

C15

D30

Attempts:

3 left

💡 Hint

Common Mistakes

Using positive 30 instead of negative -30 for X.

Changing Y coordinate incorrectly.

The end X coordinate is -30 (center offset I-15 times 2) and Y is 0 for a full circle counterclockwise.

5fill in blank

hard

Fill all three blanks to create a full circle clockwise with center offsets on X and Y.

CNC Programming

G02 X[1] Y[2] I10 J[3]

Drag options to blanks, or click blank then click option'

A20

B-20

C10

D-10

Attempts:

3 left

💡 Hint

Common Mistakes

Using positive 10 for J instead of -10.

Incorrect end X or Y coordinates.

The end X is 20 (twice the I offset), Y is -20 (twice the J offset), and J is -10 for the center offset on Y.

Practice

1. What does the G02 command do in full circle CNC programming?

easy

A. It turns the spindle on.

B. It cuts a counterclockwise arc or circle.

C. It sets the machine to absolute positioning mode.

D. It cuts a clockwise arc or circle.

Solution

1. Step 1: Understand G02 command purpose

   G02 is used to cut arcs or circles in a clockwise direction.

2. Step 2: Compare with other commands

   G03 cuts arcs counterclockwise, so G02 must be clockwise.

3. Final Answer:

   It cuts a clockwise arc or circle. -> Option D

4. Quick Check:

   G02 = Clockwise arc [OK]

Hint: G02 = Clockwise arc, G03 = Counterclockwise arc [OK]

Common Mistakes:

• Confusing G02 with G03 direction
• Thinking G02 sets positioning mode
• Assuming G02 turns spindle on

2. Which of the following is the correct syntax to program a full clockwise circle with radius 10 ending at (X0, Y0) using G02?

easy

A. G02 X0 Y0 I10 J0 F100

B. G02 X0 Y0 I0 J10 F100

C. G02 X0 Y0 I-10 J0 F100

D. G02 X0 Y0 I0 J-10 F100

Solution

1. Step 1: Understand I and J parameters

   I and J specify the center offset from the start point in X and Y directions respectively. For radius 10 on X-axis, I=10, J=0.

2. Step 2: Check direction and feedrate

   G02 is clockwise, feedrate F100 is valid. So syntax with I10 J0 is correct.

3. Final Answer:

   G02 X0 Y0 I10 J0 F100 -> Option A

4. Quick Check:

   Center offset I=10, J=0 for radius 10 [OK]

Hint: I and J are center offsets; positive I means right of start [OK]

Common Mistakes:

• Swapping I and J values
• Using negative radius offsets incorrectly
• Omitting feedrate F

3. What will be the result of this CNC code snippet?

G90
G21
G00 X0 Y0
G02 X0 Y0 I10 J0 F150

medium

A. The code will cause a syntax error and stop.

B. The machine will move in a straight line to X10 Y0.

C. The machine will cut a full clockwise circle with radius 10 at origin.

D. The machine will cut a counterclockwise arc with radius 10.

Solution

1. Step 1: Analyze positioning and units

   G90 sets absolute positioning, G21 sets units to millimeters.

2. Step 2: Interpret G02 command

   G02 with X0 Y0 and I10 J0 means cut a clockwise arc starting and ending at origin with center offset 10mm in X, making a full circle.

3. Final Answer:

   The machine will cut a full clockwise circle with radius 10 at origin. -> Option C

4. Quick Check:

   G02 with same start/end and I/J offset = full circle [OK]

Hint: Same start/end point with I/J offset = full circle [OK]

Common Mistakes:

• Thinking G02 moves in straight line
• Confusing clockwise with counterclockwise
• Assuming syntax error due to zero end point

4. Identify the error in this full circle CNC program snippet:

G90
G21
G03 X0 Y0 I10 J0 F100

medium

A. Start and end points are the same but I and J do not form a valid circle center.

B. I and J values should be negative for G03.

C. Feedrate F100 is missing.

D. G03 cannot be used for full circles.

Solution

1. Step 1: Check start and end points

   Start and end points are both at X0 Y0, which is valid for full circle.

2. Step 2: Validate I and J center offsets

   I=10 J=0 means center is 10 units right of start. For a full circle, the center must be correctly offset to form a circle. Here, the center offset is valid, but the direction G03 is counterclockwise, so the path may not complete correctly if the machine expects a different center.

3. Step 3: Identify the actual problem

   In many CNC controls, for a full circle with G03, the center offset must be negative or adjusted to match the direction. Using I10 J0 with G03 causes an invalid arc path.

4. Final Answer:

   I and J values should be negative for G03. -> Option B

5. Quick Check:

   Center offset must match arc direction [OK]

Hint: Center offsets must match arc direction for full circles [OK]

Common Mistakes:

• Assuming feedrate is missing
• Thinking G03 can't do full circles
• Using wrong sign for I/J without checking direction

5. You want to program a full circle of radius 15 mm centered at X20 Y20 using G03 (counterclockwise). The start point is at X35 Y20. Which is the correct G-code line to cut this circle?

hard

A. G03 X35 Y20 I-15 J0 F120

B. G03 X35 Y20 I15 J0 F120

C. G03 X35 Y20 I0 J-15 F120

D. G03 X35 Y20 I0 J15 F120

Solution

1. Step 1: Determine center offset from start point

   Start point is X35 Y20, center is X20 Y20. Offset I = centerX - startX = 20 - 35 = -15, J = 20 - 20 = 0.

2. Step 2: Match arc direction with offsets

   G03 is counterclockwise, so negative I offset is correct to go around center counterclockwise.

3. Final Answer:

   G03 X35 Y20 I-15 J0 F120 -> Option A

4. Quick Check:

   Center offset I = -15 matches start and center [OK]

Hint: Center offset = center - start; sign matters for direction [OK]

Common Mistakes:

• Using positive I when negative is needed
• Swapping I and J values
• Ignoring start point coordinates