Shell command for hollow solids in AutoCAD - Cell-by-Cell Formula Trace

Sample Data

This table shows different solid shapes and the thickness value used for the Shell command to hollow them.

Cell	Value
A1	Solid Type
B1	Thickness
C1	Result
A2	Cube
B2	2
A3	Cylinder
B3	1.5
A4	Sphere
B4	0.5

Formula Trace

Shell(Solid, Thickness)

Step 1: Shell(Cube, 2)

Step 2: Shell(Cylinder, 1.5)

Step 3: Shell(Sphere, 0.5)

Cell Reference Map

   A         B         C
1 Solid Type Thickness Result
2 Cube       2         
3 Cylinder   1.5       
4 Sphere     0.5       

Arrows: B2->Shell thickness for Cube
        B3->Shell thickness for Cylinder
        B4->Shell thickness for Sphere

The thickness values in column B are inputs to the Shell command applied to the solids in column A.

Result

   A         B         C
1 Solid Type Thickness Result
2 Cube       2         Hollow Cube with 2 units wall thickness
3 Cylinder   1.5       Hollow Cylinder with 1.5 units wall thickness
4 Sphere     0.5       Hollow Sphere with 0.5 units wall thickness

The Result column shows the output of applying the Shell command with the specified thickness to each solid shape.

Sheet Trace Quiz - 3 Questions

What does the Shell command do to a solid?

A Removes the inside volume leaving a wall of specified thickness

B Changes the color of the solid

C Scales the solid larger

D Converts the solid to a wireframe

Key Result

Shell(Solid, Thickness) hollows the solid leaving walls of specified thickness

Practice

1. What is the main purpose of the Shell command in AutoCAD when working with solids?

easy

A. To hollow out a solid by creating walls of a specified thickness

B. To merge two solids into one

C. To convert a 2D shape into a 3D solid

D. To change the color of a solid

Solution

1. Step 1: Understand the Shell command function

   The Shell command hollows a solid by removing material inside and leaving walls of a set thickness.

2. Step 2: Compare options with the command's purpose

   Only To hollow out a solid by creating walls of a specified thickness describes hollowing with wall thickness; others describe different actions.

3. Final Answer:

   To hollow out a solid by creating walls of a specified thickness -> Option A

4. Quick Check:

   Shell command = hollow solid with walls [OK]

Hint: Shell = hollow solid with wall thickness [OK]

Common Mistakes:

• Confusing Shell with Union or Merge commands
• Thinking Shell changes color or converts 2D to 3D
• Assuming Shell adds material instead of removing

2. Which of the following is the correct syntax to start the Shell command in AutoCAD?

easy

A. sh

B. hollow

C. shell

D. solid_shell

Solution

1. Step 1: Recall the exact command name

   The Shell command is invoked by typing shell in AutoCAD's command line.

2. Step 2: Verify other options

   Options A, C, and D are not valid AutoCAD commands for shelling solids.

3. Final Answer:

   shell -> Option C

4. Quick Check:

   Command to hollow solid = shell [OK]

Hint: Type full command 'shell' to start hollowing [OK]

Common Mistakes:

• Using abbreviations like 'sh' which don't work
• Typing 'hollow' instead of 'shell'
• Assuming command names have underscores

3. Given a solid cube of 10 units edge length, if you apply the Shell command with a wall thickness of 2 units and remove the top face, what will be the height of the hollowed cube's walls?

medium

A. 8 units

B. 10 units

C. 2 units

D. 6 units

Solution

1. Step 1: Understand Shell command effect

   The Shell command hollows the solid inward by the specified thickness but preserves the outer dimensions, so height remains 10 units.

2. Step 2: Consider removing the top face

   Removing the top face opens the top but does not change the height of the walls, which remains 10 units.

3. Step 3: Calculate the wall height

   Since the top face is removed, the wall height is reduced by the wall thickness, so height = 10 - 2 = 8 units.

4. Final Answer:

   8 units -> Option A

5. Quick Check:

   Wall height = original height - wall thickness = 8 units [OK]

Hint: Shell preserves outer dimensions; removing top face reduces wall height by thickness [OK]

Common Mistakes:

• Confusing wall height with wall thickness
• Thinking removing face does not change wall height
• Calculating inner height incorrectly

4. You tried to shell a solid with a wall thickness larger than the solid's smallest dimension and received an error. What is the most likely cause?

medium

A. You must remove all faces before shelling

B. You forgot to select the solid before running Shell

C. Shell command does not support solids with curved faces

D. Wall thickness exceeds solid size, causing invalid geometry

Solution

1. Step 1: Analyze error cause

   Shelling with wall thickness larger than the smallest solid dimension is impossible and causes geometry errors.

2. Step 2: Evaluate other options

   Options A, B, and C are incorrect because removing faces is optional, selection is required, and Shell supports curved faces.

3. Final Answer:

   Wall thickness exceeds solid size, causing invalid geometry -> Option D

4. Quick Check:

   Wall thickness > solid size = error [OK]

Hint: Wall thickness must be smaller than smallest solid dimension [OK]

Common Mistakes:

• Ignoring size limits for wall thickness
• Assuming all faces must be removed
• Believing Shell can't handle curved solids

5. You want to create a hollow container with 3 mm thick walls from a solid box measuring 50 mm x 40 mm x 30 mm. You also want to remove the top face to make it open. Which sequence of actions correctly uses the Shell command?

hard

A. Select the solid, run shell, enter 30 for thickness, then select the bottom face to remove

B. Select the solid, run shell, enter 3 for thickness, then select the top face to remove

C. Select the solid, run shell, enter 3 for thickness, then remove all faces

D. Select the solid, run shell, enter 0 for thickness, then select the top face to remove

Solution

1. Step 1: Choose correct wall thickness

   3 mm thickness is valid and less than smallest dimension (30 mm), so acceptable.

2. Step 2: Remove only the top face

   Removing the top face opens the container; removing all faces or bottom face is incorrect.

3. Final Answer:

   Select the solid, run shell, enter 3 for thickness, then select the top face to remove -> Option B

4. Quick Check:

   Shell with 3 mm walls + remove top face = hollow container [OK]

Hint: Enter wall thickness less than smallest dimension, remove desired faces [OK]

Common Mistakes:

• Using thickness equal or larger than solid size
• Removing wrong faces or all faces unnecessarily
• Entering zero thickness which is invalid