POINT and DIVIDE commands in AutoCAD - Cheat Sheet & Quick Revision

Recall & Review

beginner

What does the POINT command do in AutoCAD?

The POINT command places a point object at a specified location in the drawing. It helps mark exact spots for reference or measurement.

beginner

How does the DIVIDE command work in AutoCAD?

The DIVIDE command splits a line or curve into equal segments by placing points at the division marks. It does not break the object, just marks equal parts.

beginner

Can the DIVIDE command change the length of a line?

No, the DIVIDE command only places points along the line at equal intervals. It does not alter the line's length or shape.

intermediate

What is the difference between the POINT and DIVIDE commands?

POINT creates a single point at a chosen location. DIVIDE places multiple points evenly spaced along an existing object.

intermediate

Why are points created by DIVIDE useful in design?

They help designers measure, align, or place objects precisely at equal intervals without modifying the original shape.

What does the POINT command create in AutoCAD?

A A single point object

B A line segment

C A circle

D A text label

The POINT command creates a single point object at a specified location.

What does the DIVIDE command do to a line?

A Splits the line into separate segments

B Deletes the line

C Changes the line color

D Places points at equal intervals along the line

DIVIDE places points evenly spaced along the line without breaking it.

Does the DIVIDE command change the length of the object it divides?

A Yes, it lengthens the object

B No, it only places points

C Yes, it shortens the object

D No, it deletes the object

DIVIDE only places points; it does not alter the object's length.

How many points does the DIVIDE command place if you specify 4 segments?

A 3 points

B 4 points

C 5 points

D 1 point

DIVIDE places points at division marks, so for 4 segments, it places 3 points.

Which command would you use to mark a single location in your drawing?

A DIVIDE

B TRIM

C POINT

D OFFSET

POINT creates a single point at a chosen location.

Explain how the DIVIDE command helps in placing points along a line and why this is useful.

Think about marking equal parts without changing the original shape.

Describe the difference between the POINT and DIVIDE commands in AutoCAD.

Consider how many points each command creates and where.

Practice

1.

What does the POINT command do in AutoCAD?

easy

A. Divides an object into equal segments

B. Places a single marker at a specified location

C. Draws a line between two points

D. Measures the distance between two points

Solution

1. Step 1: Understand the purpose of the POINT command

   The POINT command is used to place a single marker or dot at a chosen location in the drawing.

2. Step 2: Compare with other commands

   DIVIDE splits objects into parts, LINE draws lines, and MEASURE measures distances, so these do not match POINT's function.

3. Final Answer:

   Places a single marker at a specified location -> Option B

4. Quick Check:

   POINT = single marker placement [OK]

Hint: POINT places one dot; DIVIDE splits into many [OK]

Common Mistakes:

• Confusing POINT with DIVIDE command
• Thinking POINT draws lines
• Assuming POINT measures distances

2.

Which of the following is the correct syntax to use the DIVIDE command on a line object in AutoCAD?

easy

A. Type DIVIDE, select the object, then enter the length of each segment

B. Type DIVIDE, enter the number of segments, then select the object

C. Type POINT, select the object, then enter the number of segments

D. Type DIVIDE, select the object, then enter the number of segments

Solution

1. Step 1: Recall the DIVIDE command steps

   First, type DIVIDE, then select the object to divide, and finally enter the number of equal segments.

2. Step 2: Identify incorrect options

   Entering the number before selecting the object or using POINT instead of DIVIDE is incorrect. Also, DIVIDE uses number of segments, not segment length.

3. Final Answer:

   Type DIVIDE, select the object, then enter the number of segments -> Option D

4. Quick Check:

   DIVIDE syntax = command, select, number [OK]

Hint: DIVIDE: command -> select object -> number segments [OK]

Common Mistakes:

• Entering number before selecting object
• Using POINT command instead of DIVIDE
• Entering segment length instead of count

3.

After using the DIVIDE command to split a 100-unit line into 4 segments, how many points will be placed on the line?

medium

A. 3 points

B. 4 points

C. 5 points

D. 6 points

Solution

1. Step 1: Understand how DIVIDE places points

   DIVIDE splits the line into equal segments by placing points at division locations, including the start and end points.

2. Step 2: Calculate points for 4 segments

   Dividing into 4 segments means 5 points are placed along the line: one at each division and including start and end points.

3. Final Answer:

   5 points -> Option C

4. Quick Check:

   DIVIDE 4 segments = 5 points placed [OK]

Hint: DIVIDE n segments places n+1 points [OK]

Common Mistakes:

• Counting only division points excluding start/end points
• Assuming points = segments - 1
• Confusing DIVIDE with MEASURE command

4.

You tried to use the DIVIDE command but no points appeared on your selected polyline. What is the most likely reason?

medium

A. You entered zero or a negative number for segments

B. You used the POINT command instead of DIVIDE

C. You forgot to select the object before entering the number

D. The polyline is locked and cannot be divided

Solution

1. Step 1: Review DIVIDE command sequence

   DIVIDE requires selecting the object first, then entering the number of segments.

2. Step 2: Identify common mistakes

   The most likely reason for no points on a selected object is entering zero or a negative number for segments, which is invalid and prevents placement.

3. Final Answer:

   You entered zero or a negative number for segments -> Option A

4. Quick Check:

   Zero/negative segments = no points [OK]

Hint: DIVIDE requires positive integer >0 for segments [OK]

Common Mistakes:

• Entering zero or a negative number for segments
• Using POINT instead of DIVIDE
• Trying to divide locked objects

5.

You want to mark 7 equal segments on a curved polyline using points. Which command should you use and how many points will be placed?

hard

A. Use DIVIDE; 6 points will be placed along the curve

B. Use DIVIDE; 7 points will be placed along the curve

C. Use POINT; 7 points will be placed along the curve

D. Use MEASURE; 7 points will be placed along the curve

Solution

1. Step 1: Choose the correct command for equal segments

   DIVIDE splits an object into equal parts by placing points; POINT places only one point.

2. Step 2: Calculate points placed for 7 segments

   DIVIDE places points at division locations, so for 7 segments, it places 8 points (including start and end points).

3. Final Answer:

   Use DIVIDE; 8 points will be placed along the curve -> Option A

4. Quick Check:

   DIVIDE n segments = n+1 points [OK]

Hint: DIVIDE n segments places n+1 points; POINT places one [OK]

Common Mistakes:

• Using POINT to place multiple points
• Assuming DIVIDE places same number of points as segments
• Confusing MEASURE with DIVIDE command