FILLET and CHAMFER commands in AutoCAD - Interactive Code Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the command to create a rounded corner between two lines using the fillet tool.

AutoCAD

FILLET [1] 10

Drag options to blanks, or click blank then click option'

ARADIUS

BDISTANCE

CANGLE

DLENGTH

Attempts:

3 left

💡 Hint

Common Mistakes

Using DISTANCE instead of RADIUS

Confusing FILLET with CHAMFER options

The FILLET command uses the RADIUS option to set the radius of the rounded corner.

2fill in blank

medium

Complete the command to create a beveled edge between two lines using the chamfer tool.

AutoCAD

CHAMFER [1] 5

Drag options to blanks, or click blank then click option'

AANGLE

BDISTANCE

CRADIUS

DDEPTH

Attempts:

3 left

💡 Hint

Common Mistakes

Using ANGLE instead of DISTANCE

Mixing FILLET and CHAMFER options

The CHAMFER command uses the DISTANCE option to set the length of the beveled edge.

3fill in blank

hard

Fix the error in the command to set the fillet radius to 15 units.

AutoCAD

FILLET RADIUS [1]

Drag options to blanks, or click blank then click option'

Aradius15

BR15

C15

Dset 15

Attempts:

3 left

💡 Hint

Common Mistakes

Adding letters before the number

Using words instead of numbers

The correct syntax is FILLET RADIUS followed by the numeric value without extra text.

4fill in blank

hard

Fill both blanks to create a chamfer with distances 3 and 4 units.

AutoCAD

CHAMFER [1] 3 [2] 4

Drag options to blanks, or click blank then click option'

ADISTANCE

BANGLE

DRADIUS

Attempts:

3 left

💡 Hint

Common Mistakes

Using ANGLE or RADIUS instead of DISTANCE

Mixing different options for the two blanks

The CHAMFER command uses two DISTANCE values to define the lengths of the bevel on each line.

5fill in blank

hard

Fill all three blanks to set a fillet radius of 8 and then apply it between two lines.

AutoCAD

FILLET [1] 8 [2] [3]

Drag options to blanks, or click blank then click option'

ARADIUS

BAPPLY

CSELECT

DEXECUTE

Attempts:

3 left

💡 Hint

Common Mistakes

Wrong order of commands

Using EXECUTE instead of APPLY

First, set the RADIUS, then SELECT the lines, and finally APPLY the fillet.

Practice

1. What does the FILLET command do in AutoCAD?

easy

A. It deletes the corner between two lines.

B. It cuts the corner between two lines by creating a straight edge.

C. It rounds the corner between two lines by creating an arc.

D. It extends lines to meet at a corner.

Solution

1. Step 1: Understand FILLET command purpose

   The FILLET command creates a rounded corner by adding an arc between two intersecting lines.

2. Step 2: Compare with other options

   Only 'It rounds the corner between two lines by creating an arc.' describes rounding with an arc; others describe cutting, deleting, or extending.

3. Final Answer:

   It rounds the corner between two lines by creating an arc. -> Option C

4. Quick Check:

   FILLET = round corner with arc [OK]

Hint: FILLET = round corners with arcs [OK]

Common Mistakes:

• Confusing FILLET with CHAMFER
• Thinking FILLET cuts corners
• Assuming FILLET deletes lines

2. Which of the following is the correct syntax to start the CHAMFER command in AutoCAD?

easy

A. CHAMFERLINE

B. FILLET

C. CHAMF

D. CHAMFER

Solution

1. Step 1: Recall command names in AutoCAD

   The full command to create a chamfer is CHAMFER.

2. Step 2: Check other options

   FILLET creates rounded corners, CHAMF is incomplete, CHAMFERLINE is not valid.

3. Final Answer:

   CHAMFER -> Option D

4. Quick Check:

   Start CHAMFER with "CHAMFER" [OK]

Hint: Type full command name 'CHAMFER' to start [OK]

Common Mistakes:

• Using FILLET instead of CHAMFER
• Typing incomplete command like CHAMF
• Adding extra words to command

3. Given two lines meeting at a corner, what will be the result of applying FILLET with radius 5?

medium

A. A straight angled edge will replace the corner, cutting it off.

B. A rounded corner with an arc of radius 5 will replace the sharp corner.

C. The lines will be extended to meet at a new point 5 units away.

D. The corner will be deleted leaving a gap.

Solution

1. Step 1: Understand FILLET with radius

   FILLET with radius 5 creates an arc of radius 5 rounding the corner.

2. Step 2: Compare with other options

   'A straight angled edge will replace the corner, cutting it off.' describes CHAMFER; the remaining options are incorrect behaviors.

3. Final Answer:

   A rounded corner with an arc of radius 5 will replace the sharp corner. -> Option B

4. Quick Check:

   FILLET radius 5 = rounded arc radius 5 [OK]

Hint: FILLET radius sets arc size for rounding [OK]

Common Mistakes:

• Confusing FILLET radius with CHAMFER distance
• Expecting straight edges instead of arcs
• Thinking lines extend instead of rounding

4. You tried to use the CHAMFER command but got an error. Which of these is the most likely cause?

medium

A. You selected only one line instead of two.

B. You entered a negative distance for the chamfer length.

C. You used FILLET instead of CHAMFER.

D. You set the radius instead of distance.

Solution

1. Step 1: Understand CHAMFER selection requirements

   CHAMFER requires selecting two lines to create the angled edge.

2. Step 2: Analyze error causes

   Selecting only one line causes an error; negative distance or radius settings usually prompt warnings but not immediate errors.

3. Final Answer:

   You selected only one line instead of two. -> Option A

4. Quick Check:

   CHAMFER needs two lines selected [OK]

Hint: Select two lines for CHAMFER to work [OK]

Common Mistakes:

• Selecting only one line
• Confusing FILLET and CHAMFER commands
• Using negative distances

5. You want to create a smooth transition between two lines but also want a flat edge instead of a curve. Which command and settings should you use?

hard

A. Use CHAMFER with equal distances to cut a flat angled edge.

B. Use CHAMFER with radius instead of distance.

C. Use FILLET with a large radius to create a wide curve.

D. Use FILLET with radius 0 to create a sharp corner.

Solution

1. Step 1: Identify desired corner type

   A flat edge means a straight angled cut, which is done by CHAMFER.

2. Step 2: Choose correct CHAMFER settings

   Using equal distances for CHAMFER creates a symmetric flat edge between lines.

3. Step 3: Eliminate incorrect options

   FILLET creates curves, radius 0 is a sharp corner not flat edge, CHAMFER uses distances not radius.

4. Final Answer:

   Use CHAMFER with equal distances to cut a flat angled edge. -> Option A

5. Quick Check:

   Flat edge = CHAMFER with equal distances [OK]

Hint: Flat edges need CHAMFER with equal distances [OK]

Common Mistakes:

• Using FILLET expecting flat edges
• Setting CHAMFER radius instead of distance
• Confusing sharp corner with flat edge