Diameter of Binary Tree in DSA Rust - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the diameter of a binary tree?

The diameter of a binary tree is the length of the longest path between any two nodes in the tree. This path may or may not pass through the root.

intermediate

How do you calculate the diameter of a binary tree using recursion?

Calculate the height of left and right subtrees for each node. The diameter is the maximum of: left diameter, right diameter, or left height + right height (path through the node).

beginner

In Rust, what data structure is commonly used to represent a binary tree node?

A binary tree node is often represented using an enum Option where TreeNode is a struct containing the value and left/right children.

intermediate

Why do we use a helper function that returns height and updates diameter in the diameter calculation?

Because the diameter depends on heights of subtrees, the helper function returns height while updating the maximum diameter found so far, avoiding repeated calculations.

intermediate

What is the time complexity of calculating the diameter of a binary tree using the optimized recursive approach?

The time complexity is O(n), where n is the number of nodes, because each node is visited once during the height and diameter calculation.

What does the diameter of a binary tree represent?

A The longest path between any two nodes

B The height of the tree

C The number of leaf nodes

D The number of nodes in the tree

The diameter is the longest path between any two nodes in the tree.

Which of these is NOT needed to compute the diameter of a binary tree?

A Number of children of root

B Height of right subtree

C Height of left subtree

D Maximum diameter found so far

The number of children of the root is not directly used; heights and maximum diameter are needed.

In Rust, what type is commonly used to represent a nullable child node in a binary tree?

A Result<TreeNode, Error>

B Vec<TreeNode>

C Option<Box<TreeNode>>

D HashMap<TreeNode>

Option> is used to represent a child that may or may not exist.

What is the main advantage of using a helper function that returns height and updates diameter simultaneously?

A Reduces code length

B Avoids repeated height calculations

C Makes the code run slower

D Increases memory usage

It avoids repeated height calculations by combining height and diameter updates in one traversal.

What is the time complexity of the optimized diameter calculation algorithm?

A O(1)

B O(n^2)

C O(log n)

D O(n)

The optimized algorithm visits each node once, so it runs in O(n) time.

Explain how to calculate the diameter of a binary tree using recursion.

Think about how height and diameter relate at each node.

Describe how a binary tree node is represented in Rust and why Option> is used.

Consider ownership and nullable children in Rust.

Practice

1. What does the diameter of a binary tree represent?

easy

A. The height of the tree

B. The total number of nodes in the tree

C. The number of leaf nodes

D. The longest path between any two nodes in the tree

Solution

1. Step 1: Understand the diameter definition

   The diameter is the longest path between any two nodes, which may or may not pass through the root.

2. Step 2: Differentiate from height and node count

   Height is the longest path from root to leaf, leaf count is number of leaves, and total nodes count all nodes, so they are different.

3. Final Answer:

   The longest path between any two nodes in the tree -> Option D

4. Quick Check:

   Diameter = longest path between nodes [OK]

Hint: Diameter is longest path, not height or node count [OK]

Common Mistakes:

• Confusing diameter with height
• Thinking diameter counts nodes instead of edges
• Assuming diameter always passes through root

2. Which Rust function signature correctly represents a function to compute the diameter of a binary tree node defined as struct TreeNode { val: i32, left: Option, right: Option }?

easy

A. fn diameter_of_binary_tree(root: Option) -> i32

B. fn diameter_of_binary_tree(root: TreeNode) -> i32

C. fn diameter_of_binary_tree(root: &TreeNode) -> i32

D. fn diameter_of_binary_tree(root: Option<TreeNode>) -> i32

Solution

1. Step 1: Understand Rust ownership and Option usage

   The tree nodes are wrapped in Option to allow for empty children and heap allocation.

2. Step 2: Match function signature to tree root type

   The root is an Option, so the function must accept this type to handle empty trees and ownership.

3. Final Answer:

   fn diameter_of_binary_tree(root: Option) -> i32 -> Option A

4. Quick Check:

   Use Option for tree root [OK]

Hint: Use Option for nullable tree nodes [OK]

Common Mistakes:

• Using TreeNode directly without Option or Box
• Using references without handling ownership
• Using Option<TreeNode> instead of Option

3. Given the following Rust code snippet, what is the output printed?

struct TreeNode {
    val: i32,
    left: Option,
    right: Option,
}

fn diameter_of_binary_tree(root: &Option) -> i32 {
    fn depth(node: &Option, max_diameter: &mut i32) -> i32 {
        if let Some(n) = node {
            let left_depth = depth(&n.left, max_diameter);
            let right_depth = depth(&n.right, max_diameter);
            *max_diameter = (*max_diameter).max(left_depth + right_depth);
            1 + left_depth.max(right_depth)
        } else {
            0
        }
    }
    let mut max_diameter = 0;
    depth(root, &mut max_diameter);
    max_diameter
}

fn main() {
    let root = Some(Box::new(TreeNode {
        val: 1,
        left: Some(Box::new(TreeNode {
            val: 2,
            left: None,
            right: None,
        })),
        right: Some(Box::new(TreeNode {
            val: 3,
            left: None,
            right: None,
        })),
    }));
    println!("{}", diameter_of_binary_tree(&root));
}

medium

A. 1

B. 3

C. 2

D. 0

Solution

1. Step 1: Calculate depths of left and right subtrees

   Left child (val 2) and right child (val 3) have depth 1 each (no children).

2. Step 2: Calculate diameter at root

   Diameter is max of previous and left_depth + right_depth = 1 + 1 = 2.

3. Final Answer:

   2 -> Option C

4. Quick Check:

   Diameter = left depth + right depth = 2 [OK]

Hint: Diameter = sum of left and right subtree depths [OK]

Common Mistakes:

• Counting nodes instead of edges
• Confusing depth with diameter
• Forgetting to update max diameter

4. Identify the bug in this Rust function to compute the diameter of a binary tree:

fn diameter_of_binary_tree(root: &Option) -> i32 {
    fn depth(node: &Option, max_diameter: &mut i32) -> i32 {
        if node.is_none() {
            return 0;
        }
        let left_depth = depth(&node.as_ref().unwrap().left, max_diameter);
        let right_depth = depth(&node.as_ref().unwrap().right, max_diameter);
        max_diameter = &mut left_depth + right_depth;  // Bug here
        1 + left_depth.max(right_depth)
    }
    let mut max_diameter = 0;
    depth(root, &mut max_diameter);
    max_diameter
}

medium

A. Incorrect assignment to max_diameter; should use max() to update

B. Missing base case for empty node

C. Wrong return type of depth function

D. Using unwrap() without checking Option

Solution

1. Step 1: Analyze max_diameter update line

   The line 'max_diameter = &mut left_depth + right_depth;' tries to assign sum to a mutable reference incorrectly.

2. Step 2: Correct way to update max_diameter

   Should update max_diameter by comparing current max and sum: '*max_diameter = (*max_diameter).max(left_depth + right_depth);'

3. Final Answer:

   Incorrect assignment to max_diameter; should use max() to update -> Option A

4. Quick Check:

   Update max_diameter with max() function [OK]

Hint: Use max() to update max_diameter, not direct assignment [OK]

Common Mistakes:

• Assigning to reference instead of dereferencing
• Not updating max_diameter correctly
• Ignoring Option safety but not main bug here

5. You want to find the diameter of a binary tree but also return the path nodes forming that diameter. Which approach best extends the diameter calculation in Rust?

hard

A. Store all node values in a vector and find longest path after traversal

B. Modify depth function to return (depth, path) and update max path when diameter increases

C. Calculate diameter first, then do a separate DFS to find path

D. Use a queue to store nodes and find diameter iteratively

Solution

1. Step 1: Understand diameter with path tracking

   To get the path, depth function must return both depth and path nodes so we can track the longest path.

2. Step 2: Update max path when diameter increases

   When a longer diameter is found, update stored path combining left and right subtree paths plus current node.

3. Final Answer:

   Modify depth function to return (depth, path) and update max path when diameter increases -> Option B

4. Quick Check:

   Return depth and path together to track diameter path [OK]

Hint: Return depth and path tuple to track diameter nodes [OK]

Common Mistakes:

• Trying to find path after diameter without tracking
• Using iterative queue approach which is complex here
• Storing all nodes wastes memory and is inefficient