Search in Rotated Sorted Array in DSA Python - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is a rotated sorted array?

A rotated sorted array is an array that was originally sorted in ascending order but then rotated (shifted) at some pivot point. For example, [4,5,6,7,0,1,2] is a rotated version of [0,1,2,4,5,6,7].

beginner

Why can't we use simple binary search directly on a rotated sorted array?

Because the array is not fully sorted in ascending order due to rotation, simple binary search may fail. We need to identify which part of the array is sorted to decide where to search next.

intermediate

What is the main idea behind searching in a rotated sorted array using binary search?

At each step, check which half (left or right) is sorted. If the target lies within the sorted half, search there; otherwise, search the other half. Repeat until the target is found or the search space is empty.

intermediate

Given the array [6,7,8,1,2,3,4,5], what is the pivot index where rotation happened?

The pivot index is 3, where the value changes from 8 to 1. This is the point where the array was rotated.

beginner

What is the time complexity of searching in a rotated sorted array using the binary search approach?

The time complexity is O(log n) because the search space is halved at each step, similar to regular binary search.

In a rotated sorted array, which part is always sorted?

A At least one half (left or right) is sorted

B The entire array is sorted

C No part is sorted

D Only the middle element is sorted

At any step, either the left half or the right half of the current search space is sorted.

If the target is greater than the middle element and less than or equal to the rightmost element, where should we search next?

A Right half

B Left half

C Anywhere

D Target not found

If the right half is sorted and the target lies within it, search the right half.

What is the first step in the binary search on a rotated sorted array?

A Search linearly

B Check if the middle element is the target

C Sort the array

D Find the pivot index first

We first check if the middle element is the target before deciding which half to search.

What happens if the target is not found after the search space is empty?

A Return 0

B Return the last middle element

C Return -1 or not found

D Restart the search

If the target is not found, we return -1 or an indication that the target is not present.

Which of these arrays is a rotated sorted array?

A [1,2,3,4,5,6,7]

B [1,3,2,4,5,6,7]

C [7,6,5,4,3,2,1]

D [3,4,5,6,7,1,2]

Option D is a sorted array rotated at pivot between 7 and 1.

Explain how binary search is adapted to find a target in a rotated sorted array.

Think about which half is sorted and where the target lies.

Describe what a rotated sorted array looks like and how to find the pivot point.

Look for where the sequence stops increasing.

Practice

1. What is the main challenge when searching for an element in a rotated sorted array compared to a normal sorted array?

easy

A. The array elements are all negative numbers.

B. The array contains duplicate elements which confuse the search.

C. The array is not fully sorted, so normal binary search cannot be directly applied.

D. The array size is unknown, so we cannot set boundaries.

Solution

1. Step 1: Understand normal binary search

   Binary search works efficiently on fully sorted arrays by dividing the search space in half each time.

2. Step 2: Identify the challenge with rotated arrays

   In a rotated sorted array, the array is sorted but rotated at some pivot, so it is not fully sorted in one direction, making normal binary search invalid without adjustments.

3. Final Answer:

   The array is not fully sorted, so normal binary search cannot be directly applied. -> Option C

4. Quick Check:

   Rotated array breaks full sorting = normal binary search fails [OK]

Hint: Rotated means partial sorting, normal binary search fails [OK]

Common Mistakes:

• Assuming array is fully sorted
• Ignoring the rotation pivot
• Thinking duplicates cause the main problem

2. Which of the following is the correct syntax to start a binary search on a rotated sorted array named arr with target in Python?

easy

A. left, right = 1, len(arr) - 1

B. left, right = 1, len(arr)

C. left, right = 0, len(arr)

D. left, right = 0, len(arr) - 1

Solution

1. Step 1: Understand array indexing in Python

   Python arrays are zero-indexed, so the first element is at index 0 and the last at len(arr) - 1.

2. Step 2: Set search boundaries correctly

   To search the entire array, left should start at 0 and right at len(arr) - 1.

3. Final Answer:

   left, right = 0, len(arr) - 1 -> Option D

4. Quick Check:

   Zero-based indexing means last index is length minus one [OK]

Hint: Start left at 0 and right at length minus one [OK]

Common Mistakes:

• Starting left at 1 instead of 0
• Setting right to length instead of length - 1
• Confusing inclusive and exclusive ranges

3. What will be the output of the following Python code?

def search_rotated(arr, target):
    left, right = 0, len(arr) - 1
    while left <= right:
        mid = (left + right) // 2
        if arr[mid] == target:
            return mid
        if arr[left] <= arr[mid]:
            if arr[left] <= target < arr[mid]:
                right = mid - 1
            else:
                left = mid + 1
        else:
            if arr[mid] < target <= arr[right]:
                left = mid + 1
            else:
                right = mid - 1
    return -1

print(search_rotated([4,5,6,7,0,1,2], 0))

medium

A. -1

B. 4

C. 0

D. 6

Solution

1. Step 1: Trace the binary search on rotated array

   Array: [4,5,6,7,0,1,2], target: 0. Initial left=0, right=6, mid=3 (value 7). Since arr[left] <= arr[mid], left half is sorted. Target 0 is not in [4..7], so move left to mid+1=4.

2. Step 2: Continue search in right half

   Now left=4, right=6, mid=5 (value 1). arr[left] <= arr[mid], left half sorted. Target 0 is less than arr[mid], so right=mid-1=4. Next mid=4 (value 0), matches target, return 4.

3. Final Answer:

   4 -> Option B

4. Quick Check:

   Target 0 found at index 4 [OK]

Hint: Check which half is sorted, then narrow search [OK]

Common Mistakes:

• Not updating left/right correctly
• Confusing comparison operators
• Returning wrong index or -1 incorrectly

4. Identify the bug in the following code snippet for searching in a rotated sorted array:

def search(arr, target):
    left, right = 0, len(arr) - 1
    while left < right:
        mid = (left + right) // 2
        if arr[mid] == target:
            return mid
        if arr[left] <= arr[mid]:
            if arr[left] <= target < arr[mid]:
                right = mid - 1
            else:
                left = mid + 1
        else:
            if arr[mid] < target <= arr[right]:
                left = mid + 1
            else:
                right = mid - 1
    return -1

medium

A. The loop condition should be while left <= right, not while left < right.

B. The mid calculation is incorrect; it should be mid = (left + right + 1) // 2.

C. The target comparison should use <= instead of < in all conditions.

D. The function should return left instead of -1 at the end.

Solution

1. Step 1: Analyze loop condition

   The loop uses while left < right, which stops when left == right, possibly missing the last element check.

2. Step 2: Correct loop condition for full search

   Using while left <= right ensures the search includes the last element, preventing missing the target at the boundary.

3. Final Answer:

   The loop condition should be while left <= right, not while left < right. -> Option A

4. Quick Check:

   Include last element by using <= in loop condition [OK]

Hint: Use <= in loop to check all elements including boundaries [OK]

Common Mistakes:

• Using < instead of <= in loop
• Miscomputing mid index
• Returning wrong value when not found

5. Given a rotated sorted array arr = [30, 40, 50, 10, 20], what is the index of the target 10 using an efficient search algorithm?

hard

A. 3

B. 2

C. 4

D. -1

Solution

1. Step 1: Identify the rotation and search boundaries

   Array: [30, 40, 50, 10, 20], target: 10. left=0, right=4, mid=2 (value 50). Left half is sorted (30 to 50).

2. Step 2: Decide which half to search

   Target 10 is not in left sorted half (30 to 50), so search right half: left=mid+1=3, right=4. mid=3 (value 10), matches target.

3. Final Answer:

   3 -> Option A

4. Quick Check:

   Target 10 found at index 3 [OK]

Hint: Check sorted half, then narrow search to find target [OK]

Common Mistakes:

• Assuming array is fully sorted
• Not updating left/right correctly
• Returning wrong index or -1 incorrectly