Quick Sort Algorithm in DSA Python - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the main idea behind the Quick Sort algorithm?

Quick Sort works by picking a 'pivot' element and rearranging the list so that all smaller elements come before the pivot and all larger elements come after it. Then it sorts the smaller and larger parts separately.

beginner

What role does the 'pivot' play in Quick Sort?

The pivot divides the list into two parts: elements less than the pivot and elements greater than the pivot. This helps break down the problem into smaller parts to sort.

intermediate

Explain the partition step in Quick Sort.

Partitioning rearranges the list so that elements smaller than the pivot are on the left, and elements larger are on the right. The pivot ends up in its correct sorted position.

intermediate

What is the average time complexity of Quick Sort?

The average time complexity is O(n log n), where n is the number of elements. This means it sorts efficiently for most cases.

beginner

Why can Quick Sort be faster than other sorting algorithms like Bubble Sort?

Quick Sort divides the problem into smaller parts and sorts them independently, reducing the total work. Bubble Sort compares and swaps elements repeatedly, which is slower.

What does Quick Sort use to divide the list?

A A pivot element

B A temporary array

C A stack

D A queue

Quick Sort uses a pivot element to split the list into smaller and larger parts.

After partitioning, where is the pivot element placed?

A In its correct sorted position

B At the end of the list

C Randomly in the list

D At the start of the list

The pivot is placed in its correct sorted position after partitioning.

What is the worst-case time complexity of Quick Sort?

A O(n)

B O(n log n)

C O(n^2)

D O(log n)

In the worst case, Quick Sort can take O(n^2) time, for example when the smallest or largest element is always chosen as pivot.

Which step is repeated recursively in Quick Sort?

A Counting elements

B Merging sorted lists

C Swapping adjacent elements

D Partitioning sublists

Quick Sort recursively partitions sublists to sort the entire list.

Which of these is NOT true about Quick Sort?

A It sorts in place without extra arrays

B It always takes O(n log n) time

C It uses a pivot to divide the list

D It is a divide and conquer algorithm

Quick Sort's average time is O(n log n), but worst case can be O(n^2). So it does not always take O(n log n).

Describe how Quick Sort sorts a list step-by-step.

Think about how the list is split and sorted smaller parts.

Explain why Quick Sort is considered a divide and conquer algorithm.

Focus on how the problem is broken down and solved.

Practice

1. What is the main idea behind the Quick Sort algorithm?

easy

A. Sort the list by inserting elements into their correct position one by one

B. Sort the list by repeatedly swapping adjacent elements

C. Divide the list into smaller parts using a pivot and sort them recursively

D. Sort the list by merging two sorted halves

Solution

1. Step 1: Understand Quick Sort approach

   Quick Sort picks a pivot element and divides the list into parts smaller and larger than the pivot.

2. Step 2: Recursive sorting

   It then sorts these parts recursively, combining them to get the sorted list.

3. Final Answer:

   Divide the list into smaller parts using a pivot and sort them recursively -> Option C

4. Quick Check:

   Quick Sort = Divide and conquer [OK]

Hint: Remember: pivot divides list, then sort parts recursively [OK]

Common Mistakes:

• Confusing Quick Sort with Bubble Sort
• Thinking Quick Sort merges sorted halves
• Assuming Quick Sort inserts elements one by one

2. Which of the following is the correct way to define the partition function header in Python for Quick Sort?

easy

A. def partition(arr, low, high):

B. def partition(arr):

C. def partition(low, high):

D. def partition(arr, pivot):

Solution

1. Step 1: Identify required parameters

   The partition function needs the array and the current low and high indices to work on a sublist.

2. Step 2: Match function signature

   Only def partition(arr, low, high): correctly includes all three parameters: arr, low, and high.

3. Final Answer:

   def partition(arr, low, high): -> Option A

4. Quick Check:

   Partition needs array and index bounds [OK]

Hint: Partition needs array plus low and high indexes [OK]

Common Mistakes:

• Omitting low and high parameters
• Using pivot as parameter instead of indices
• Defining partition with only one parameter

3. What will be the output of the following code snippet?

def quick_sort(arr, low, high):
    if low < high:
        pi = partition(arr, low, high)
        quick_sort(arr, low, pi - 1)
        quick_sort(arr, pi + 1, high)

def partition(arr, low, high):
    pivot = arr[high]
    i = low - 1
    for j in range(low, high):
        if arr[j] <= pivot:
            i += 1
            arr[i], arr[j] = arr[j], arr[i]
    arr[i + 1], arr[high] = arr[high], arr[i + 1]
    return i + 1

arr = [3, 6, 8, 10, 1, 2, 1]
quick_sort(arr, 0, len(arr) - 1)
print(arr)

medium

A. [1, 1, 2, 3, 6, 8, 10]

B. [10, 8, 6, 3, 2, 1, 1]

C. [3, 6, 8, 10, 1, 2, 1]

D. [1, 2, 1, 3, 6, 8, 10]

Solution

1. Step 1: Understand partition and recursive calls

   The partition function places the pivot in correct position and divides array into smaller and larger parts. Quick sort recursively sorts these parts.

2. Step 2: Trace sorting of given array

   Starting with [3,6,8,10,1,2,1], after full recursion, the array becomes sorted ascending: [1,1,2,3,6,8,10].

3. Final Answer:

   [1, 1, 2, 3, 6, 8, 10] -> Option A

4. Quick Check:

   Quick Sort output = sorted array ascending [OK]

Hint: Quick Sort outputs sorted array ascending by default [OK]

Common Mistakes:

• Thinking Quick Sort sorts descending by default
• Confusing original array with sorted output
• Ignoring pivot placement effect

4. Identify the error in this Quick Sort partition function:

def partition(arr, low, high):
    pivot = arr[low]
    i = low + 1
    for j in range(low + 1, high):
        if arr[j] < pivot:
            arr[i], arr[j] = arr[j], arr[i]
            i += 1
    arr[low], arr[i-1] = arr[i-1], arr[low]
    return i-1

medium

A. Swapping inside the loop is incorrect

B. Pivot should be arr[high] instead of arr[low]

C. Return statement should return 'i' instead of 'i-1'

D. The for loop should include 'high' index by using range(low + 1, high + 1)

Solution

1. Step 1: Check loop range for partitioning

   The for loop uses range(low + 1, high), which excludes the 'high' index element. It should include 'high' to consider the pivot's correct position.

2. Step 2: Correct loop range

   Changing to range(low + 1, high + 1) includes the last element, ensuring all elements are compared to pivot.

3. Final Answer:

   The for loop should include 'high' index by using range(low + 1, high + 1) -> Option D

4. Quick Check:

   Loop must cover full sublist including high index [OK]

Hint: Loop must include high index to compare all elements [OK]

Common Mistakes:

• Forgetting to include last element in loop
• Changing pivot position unnecessarily
• Returning wrong index after partition

5. You want to sort a list of strings by their length using Quick Sort. Which modification to the partition function is correct?

def partition(arr, low, high):
    pivot = arr[high]
    i = low - 1
    for j in range(low, high):
        if ???:
            i += 1
            arr[i], arr[j] = arr[j], arr[i]
    arr[i + 1], arr[high] = arr[high], arr[i + 1]
    return i + 1

What should replace ??? to sort by string length?

hard

A. arr[j].startswith(pivot)

B. len(arr[j]) <= len(pivot)

C. len(arr[j]) >= len(pivot)

D. arr[j] <= pivot

Solution

1. Step 1: Understand sorting by string length

   To sort strings by length, compare lengths of elements, not the strings themselves.

2. Step 2: Replace condition with length comparison

   Using len(arr[j]) <= len(pivot) ensures elements with length less or equal to pivot's length go left.

3. Final Answer:

   len(arr[j]) <= len(pivot) -> Option B

4. Quick Check:

   Compare lengths to sort strings by length [OK]

Hint: Compare lengths, not strings, to sort by length [OK]

Common Mistakes:

• Comparing strings lexicographically instead of length
• Using >= instead of <= causing reverse order
• Using unrelated string methods like startswith