Insert at Middle Specific Position in DSA C++ - Cheat Sheet & Quick Revision

Recall & Review

beginner

What does 'Insert at Middle Specific Position' mean in a linked list?

It means adding a new node at a given position inside the list, not at the start or end, but somewhere in the middle.

beginner

Why do we need to traverse the list before inserting at a middle position?

Because linked lists do not have direct access by index, we must move node by node to reach the position before insertion.

intermediate

What happens if you try to insert at a position greater than the list length?

The insertion should fail or be handled safely because the position does not exist in the list.

intermediate

In C++, how do you link the new node to the list when inserting in the middle?

You set the new node's next pointer to the next node of the current position, then update the current node's next pointer to the new node.

beginner

What is the time complexity of inserting at a middle position in a singly linked list?

O(n), because you may need to traverse up to n nodes to reach the insertion point.

What is the first step to insert a node at position 3 in a singly linked list?

A Traverse to the node at position 2

B Create a new node and set it as head

C Traverse to the node at position 3

D Delete the node at position 3

To insert at position 3, you need to reach position 2 to link the new node after it.

If the list has 4 nodes, what happens when you try to insert at position 6?

A Insertion succeeds at the end

B Insertion fails or is invalid

C Insertion happens at position 4

D List size increases automatically

Position 6 is beyond the list length, so insertion should fail or be handled safely.

Which pointer do you update to insert a new node in the middle?

A Both new node's next and previous node's next pointers

B Previous node's next pointer only

C New node's next pointer only

D Head pointer

You set the new node's next to the next node, then update the previous node's next to the new node.

What is the time complexity of inserting at a middle position in a singly linked list?

A O(1)

B O(n^2)

C O(log n)

D O(n)

You must traverse the list to the insertion point, which takes O(n) time.

Which of these is NOT a valid step when inserting at a middle position?

A Update the new node's next pointer

B Traverse to the node before insertion point

C Delete the node at insertion point

D Create a new node

Deleting a node is not part of insertion; insertion adds a new node without removing others.

Explain step-by-step how to insert a new node at a specific middle position in a singly linked list.

Think about how pointers change to insert the new node.

What are the common errors to watch for when inserting at a middle position in a linked list?

Consider what can go wrong with pointers and positions.

Practice

1. What does inserting a node at a specific middle position in a linked list mean?

easy

A. Adding a new node only at the start of the list

B. Adding a new node exactly at the given position counting from the head

C. Adding a new node only at the end of the list

D. Replacing the node at the given position with a new node

Solution

1. Step 1: Understand insertion position

   Inserting at a specific middle position means placing the new node exactly at that position counting from the start (head) of the list.

2. Step 2: Differentiate from other insertions

   Insertion at start or end is different; here we insert in between nodes without replacing any node.

3. Final Answer:

   Adding a new node exactly at the given position counting from the head -> Option B

4. Quick Check:

   Insert at position means place new node there [OK]

Hint: Insert means add new node at exact position, not replace [OK]

Common Mistakes:

• Confusing insertion with replacement
• Thinking insertion only happens at start or end
• Ignoring position counting from head

2. Which of the following C++ code snippets correctly inserts a new node with value 10 at position 3 in a singly linked list?

easy

A. Node* temp = head; for(int i=1; i<2; i++) temp = temp->next; Node* newNode = new Node(10); newNode->next = temp->next; temp->next = newNode;

B. Node* newNode = new Node(10); newNode->next = head; head = newNode;

C. Node* temp = head; for(int i=1; i<3; i++) temp = temp->next; Node* newNode = new Node(10); newNode->next = temp->next; temp->next = newNode;

D. Node* newNode = new Node(10); head->next = newNode; newNode->next = NULL;

Solution

1. Step 1: Identify correct loop for position 3 insertion

   To insert at position 3, we stop at node 2 (position 2), so loop runs i=1 to i<2.

2. Step 2: Check pointer updates

   New node's next points to temp->next, then temp->next updated to new node. This correctly inserts at position 3.

3. Final Answer:

   Code snippet in option A correctly inserts at position 3 -> Option A

4. Quick Check:

   Loop stops at position before insertion [OK]

Hint: Loop till position-1, then insert new node [OK]

Common Mistakes:

• Looping one extra time causing wrong position
• Not updating newNode->next before temp->next
• Inserting at wrong position due to loop error

3. What will be the linked list after inserting value 15 at position 2 in the list: 5 -> 10 -> 20 -> null?

Node* head = new Node(5);
head->next = new Node(10);
head->next->next = new Node(20);

// Insert 15 at position 2
Node* temp = head;
for(int i=1; i<1; i++) temp = temp->next;
Node* newNode = new Node(15);
newNode->next = temp->next;
temp->next = newNode;

medium

A. 5 -> 15 -> 10 -> 20 -> null

B. 15 -> 5 -> 10 -> 20 -> null

C. 5 -> 10 -> 15 -> 20 -> null

D. 5 -> 10 -> 20 -> 15 -> null

Solution

1. Step 1: Trace loop to find insertion point

   Loop runs i=1 to i<1, so no iteration. temp points to head (value 5).

2. Step 2: Insert new node after temp

   New node 15 points to temp->next (10), then temp->next points to new node. List becomes 5 -> 15 -> 10 -> 20 -> null.

3. Final Answer:

   5 -> 15 -> 10 -> 20 -> null -> Option A

4. Quick Check:

   Insert after node 1 gives new node at position 2 [OK]

Hint: Loop zero times means insert after head [OK]

Common Mistakes:

• Miscounting loop iterations
• Inserting at wrong position
• Not updating pointers correctly

4. Identify the error in the following code that tries to insert a node with value 25 at position 4 in a linked list:

Node* temp = head;
for(int i=1; i<=4; i++) {
  temp = temp->next;
}
Node* newNode = new Node(25);
newNode->next = temp->next;
temp->next = newNode;

medium

A. No error, code works fine

B. New node's next pointer is not set correctly

C. New node is not created properly

D. Loop runs too many times causing temp to become NULL

Solution

1. Step 1: Analyze loop iterations

   Loop runs i=1 to i<=4 (4 times), moving temp 4 nodes ahead. For insertion at position 4, temp should stop at position 3.

2. Step 2: Consequence of loop error

   Temp moves too far, possibly NULL, causing runtime error when accessing temp->next.

3. Final Answer:

   Loop runs too many times causing temp to become NULL -> Option D

4. Quick Check:

   Loop must run position-2 times, not position times [OK]

Hint: Loop till position-2 to avoid NULL pointer [OK]

Common Mistakes:

• Using <= instead of < in loop condition
• Not checking for NULL before accessing next
• Incorrect loop range for insertion

5. Given a singly linked list with nodes: 1 -> 3 -> 5 -> 7 -> null, write the steps to insert a new node with value 4 at position 3. What will be the final list?

hard

A. 1 -> 4 -> 3 -> 5 -> 7 -> null

B. 4 -> 1 -> 3 -> 5 -> 7 -> null

C. 1 -> 3 -> 4 -> 5 -> 7 -> null

D. 1 -> 3 -> 5 -> 7 -> 4 -> null

Solution

1. Step 1: Traverse to node before position 3

   Start at head (1), move to next node (3) which is position 2. Stop here to insert after this node.

2. Step 2: Insert new node with value 4

   Create new node 4, set its next to current node's next (5), then update current node's next to new node.

3. Final Answer:

   1 -> 3 -> 4 -> 5 -> 7 -> null -> Option C

4. Quick Check:

   Insert at position 3 places new node between 3 and 5 [OK]

Hint: Stop at position-1 node, insert new node after it [OK]

Common Mistakes:

• Inserting at wrong position
• Not updating pointers correctly
• Confusing position counting from 0 or 1