Array Reversal Techniques in DSA C++ - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the basic idea behind reversing an array?

Reversing an array means swapping elements from the start with elements from the end, moving towards the center until all elements are reversed.

beginner

Explain the two-pointer technique for array reversal.

Use two pointers: one at the start and one at the end of the array. Swap the elements at these pointers, then move the start pointer forward and the end pointer backward until they meet or cross.

beginner

What is the time complexity of reversing an array using the two-pointer method?

The time complexity is O(n), where n is the number of elements in the array, because each element is visited once during swapping.

intermediate

Can you reverse an array using recursion? Briefly describe how.

Yes. Recursively swap the first and last elements, then call the function on the subarray excluding these two elements until the base case where start index >= end index.

beginner

Why is reversing an array in-place beneficial?

In-place reversal uses no extra space, saving memory. It modifies the original array directly, which is efficient for large data.

Which method swaps elements from both ends moving towards the center to reverse an array?

A Linear search

B Bubble sort

C Binary search

D Two-pointer technique

The two-pointer technique swaps elements from the start and end moving inward to reverse the array.

What is the time complexity of reversing an array of size n using the two-pointer method?

A O(log n)

B O(n^2)

C O(n)

D O(1)

Reversing an array with two pointers requires visiting each element once, so it is O(n).

Which of the following is NOT a characteristic of in-place array reversal?

A Uses extra memory proportional to array size

B Modifies the original array

C Swaps elements without extra array

D Saves memory space

In-place reversal does NOT use extra memory proportional to array size; it swaps elements within the original array.

In recursive array reversal, what is the base case?

A When start index is less than end index

B When start index equals or exceeds end index

C When array is empty

D When array size is even

The base case occurs when the start index is equal to or greater than the end index, meaning the array is fully reversed.

Which of these is a correct step in the two-pointer array reversal?

A Swap elements at start and end pointers, then move both pointers towards center

B Swap elements only at the start pointer

C Move pointers away from each other after swapping

D Swap elements randomly

The two-pointer method swaps elements at start and end pointers, then moves pointers inward.

Describe how you would reverse an array using the two-pointer technique step-by-step.

Think about swapping pairs from outside towards the center.

Explain the advantages of reversing an array in-place compared to using extra space.

Consider memory usage and efficiency.

Practice

1. What does reversing an array mean in simple terms?

easy

A. Changing the order of elements so the last becomes first and first becomes last

B. Sorting the array in ascending order

C. Removing duplicate elements from the array

D. Adding new elements at the end of the array

Solution

1. Step 1: Understand the meaning of reversal

   Reversing means flipping the order of elements so the last element comes first and the first element goes last.

2. Step 2: Compare with other options

   Sorting arranges elements by value, removing duplicates deletes repeated items, adding elements increases size. None of these change order like reversal.

3. Final Answer:

   Changing the order of elements so the last becomes first and first becomes last -> Option A

4. Quick Check:

   Reversal = Flip order [OK]

Hint: Reversal flips order, not sorting or removing [OK]

Common Mistakes:

• Confusing reversal with sorting
• Thinking reversal removes elements
• Mixing reversal with adding elements

2. Which of the following C++ code snippets correctly reverses an array arr of size n using a for loop?

easy

A. for(int i = 0; i < n; i++) { arr[i] = arr[i]; }

B. for(int i = 0; i < n; i++) { arr[i] = arr[n - i]; }

C. for(int i = 0; i < n / 2; i++) { std::swap(arr[i], arr[n - i - 1]); }

D. for(int i = 0; i < n; i++) { arr[i] = arr[i + 1]; }

Solution

1. Step 1: Analyze the correct reversal loop

   The loop swaps elements from start and end moving towards the center, stopping at half the array size.

2. Step 2: Check other options for errors

   A does nothing, for(int i = 0; i < n; i++) { arr[i] = arr[n - i]; } accesses out-of-bound index (arr[n - i]), C shifts elements incorrectly.

3. Final Answer:

   for(int i = 0; i < n / 2; i++) { std::swap(arr[i], arr[n - i - 1]); } -> Option C

4. Quick Check:

   Swap pairs from ends to middle [OK]

Hint: Swap pairs from ends to middle to reverse [OK]

Common Mistakes:

• Accessing out-of-bound indices
• Not stopping loop at half the array
• Overwriting elements without swapping

3. What is the output of the following C++ code?

int arr[] = {1, 2, 3, 4, 5};
int n = 5;
for(int i = 0; i < n / 2; i++) {
  int temp = arr[i];
  arr[i] = arr[n - i - 1];
  arr[n - i - 1] = temp;
}
for(int i = 0; i < n; i++) {
  std::cout << arr[i] << " ";
}

medium

A. 5 4 3 2 1

B. 1 2 3 4 5

C. 5 2 3 4 1

D. 4 3 2 1 5

Solution

1. Step 1: Trace the swapping loop

   Swaps arr[0] with arr[4], arr[1] with arr[3]. After swaps, arr = {5,4,3,2,1}.

2. Step 2: Print the array elements

   The loop prints all elements in order: 5 4 3 2 1.

3. Final Answer:

   5 4 3 2 1 -> Option A

4. Quick Check:

   Reversed array prints 5 4 3 2 1 [OK]

Hint: Swapping pairs reverses array elements [OK]

Common Mistakes:

• Not swapping correctly
• Loop running too many times
• Printing before reversal

4. Identify the error in the following code that attempts to reverse an array arr of size n:

for(int i = 0; i <= n / 2; i++) {
  int temp = arr[i];
  arr[i] = arr[n - i - 1];
  arr[n - i - 1] = temp;
}

medium

A. No error; the code correctly reverses the array

B. The swap logic is incorrect; it should swap arr[i] with arr[i+1]

C. The loop should run from i = 1 to n / 2 instead of 0

D. The loop condition should be 'i < n / 2' to avoid swapping the middle element twice

Solution

1. Step 1: Analyze the loop condition

   The loop runs while i <= n/2, which includes the middle element when n is odd.

2. Step 2: Understand the effect of swapping middle element twice

   Swapping the middle element with itself is unnecessary and can cause incorrect behavior or redundant operation.

3. Final Answer:

   The loop condition should be 'i < n / 2' to avoid swapping the middle element twice -> Option D

4. Quick Check:

   Loop must stop before middle index [OK]

Hint: Use 'i < n/2' to avoid double swapping middle element [OK]

Common Mistakes:

• Using <= instead of < in loop condition
• Swapping wrong elements
• Starting loop from 1 instead of 0

5. Given a 2D array (matrix) of size m x n, which approach correctly reverses each row individually in C++?

hard

A. Swap elements column-wise from first to last column for all rows simultaneously

B. Use a nested loop: for each row, swap elements from start to end using two pointers

C. Transpose the matrix and then reverse the entire matrix as a 1D array

D. Sort each row in descending order to reverse it

Solution

1. Step 1: Understand reversing each row

   Reversing each row means flipping elements in that row only, not affecting other rows.

2. Step 2: Identify correct method

   Using two pointers per row to swap elements from start and end is the correct approach.

3. Step 3: Check incorrect options

   Swapping column-wise mixes rows, transposing changes structure, sorting changes order by value, not position.

4. Final Answer:

   Use a nested loop: for each row, swap elements from start to end using two pointers -> Option B

5. Quick Check:

   Reverse rows by swapping pairs inside each row [OK]

Hint: Reverse each row with two-pointer swaps inside nested loop [OK]

Common Mistakes:

• Trying to reverse columns instead of rows
• Using sorting instead of reversing
• Transposing matrix instead of reversing rows