Section view creation in Solidworks - Cell-by-Cell Formula Trace

Sample Data

This table lists parts with their dimensions in millimeters. It represents a simple parts list used in SolidWorks for creating section views.

Cell	Value
A1	Part Name
B1	Length (mm)
C1	Width (mm)
D1	Height (mm)
A2	Bracket
B2	100
C2	50
D2	30
A3	Base Plate
B3	200
C3	150
D3	20
A4	Cover
B4	120
C4	80
D4	40

Formula Trace

SECTION_VIEW_DEPTH = IF(D2 > 25, D2 / 2, D2)

Step 1: D2 > 25

Step 2: TRUE

Step 3: D2 / 2

Step 4: 15

Cell Reference Map

    A       B       C       D
1 | Part Name | Length | Width | Height
2 | Bracket   |  100   |  50   |  30  <-- referenced cell for height
3 | Base Plate|  200   | 150   |  20
4 | Cover     |  120   |  80   |  40

The formula references cell D2 which contains the height of the Bracket part. This value determines the section view depth.

Result

    A       B       C       D       E
1 | Part Name | Length | Width | Height | Section View Depth
2 | Bracket   |  100   |  50   |  30   | 15
3 | Base Plate|  200   | 150   |  20   | 20
4 | Cover     |  120   |  80   |  40   | 20

The new column 'Section View Depth' shows the calculated depth for the section view. For Bracket, since height is 30 (greater than 25), depth is half (15). For Base Plate and Cover, depth equals height because height is not greater than 25.

Sheet Trace Quiz - 3 Questions

What is the section view depth for the Bracket part?

A 25

B 30

C 15

D 10

Key Result

IF(height > threshold, height / 2, height) calculates section view depth based on height.

Practice

1. What is the main purpose of creating a section view in SolidWorks?

easy

A. To show hidden internal details by cutting through the model

B. To change the color of the model

C. To add textures to the surface

D. To create a 3D animation of the model

Solution

1. Step 1: Understand what a section view does

   A section view cuts through a model to reveal hidden internal features that are not visible from the outside.

2. Step 2: Identify the correct purpose

   Changing color, adding textures, or animations are unrelated to section views.

3. Final Answer:

   To show hidden internal details by cutting through the model -> Option A

4. Quick Check:

   Section view = reveals hidden details [OK]

Hint: Section views cut models to reveal inside parts [OK]

Common Mistakes:

• Thinking section views change model color
• Confusing section views with animations
• Assuming section views add textures

2. Which step is necessary to start creating a section view in SolidWorks?

easy

A. Add a dimension to the sketch

B. Apply a material texture to the model

C. Select a plane or face to define the cutting location

D. Export the model as a PDF

Solution

1. Step 1: Identify the first action for section view

   Creating a section view requires selecting a plane or face where the model will be cut.

2. Step 2: Eliminate unrelated steps

   Applying textures, exporting files, or adding sketch dimensions are not part of starting a section view.

3. Final Answer:

   Select a plane or face to define the cutting location -> Option C

4. Quick Check:

   Start section view = select cutting plane [OK]

Hint: Pick a plane first to cut the model [OK]

Common Mistakes:

• Trying to add textures before cutting
• Exporting instead of creating view
• Adding sketch dimensions unrelated to section

3. Given a model and a selected cutting plane, what will happen if you drag the section line further into the model in SolidWorks?

medium

A. More internal features will be revealed in the section view

B. The model color will change to red

C. The model will rotate automatically

D. The section view will close and disappear

Solution

1. Step 1: Understand the effect of moving the section line

   Dragging the section line deeper into the model cuts more material, revealing more internal features.

2. Step 2: Exclude unrelated effects

   Changing color, rotating, or closing the view are not caused by moving the section line.

3. Final Answer:

   More internal features will be revealed in the section view -> Option A

4. Quick Check:

   Drag section line = reveal more inside [OK]

Hint: Drag section line to see more inside [OK]

Common Mistakes:

• Expecting color changes from dragging
• Thinking model rotates automatically
• Assuming section view closes when dragged

4. You created a section view but it shows no internal details. What is the most likely mistake?

medium

A. The model color was set to transparent

B. The model was saved incorrectly

C. The section view was created in a different file

D. The cutting plane was placed outside the model

Solution

1. Step 1: Analyze why no internal details appear

   If the cutting plane is outside the model, the section view won't cut through anything, so no internal details show.

2. Step 2: Rule out unrelated causes

   Saving errors, file mix-ups, or color transparency do not prevent internal details from showing in a section view.

3. Final Answer:

   The cutting plane was placed outside the model -> Option D

4. Quick Check:

   No details = cutting plane outside model [OK]

Hint: Check cutting plane position if no details show [OK]

Common Mistakes:

• Assuming file or save errors cause no details
• Blaming color transparency for missing cut
• Not verifying cutting plane location

5. You need to create a section view that cuts through two different planes at once to show complex internal features. What is the best approach in SolidWorks?

hard

A. Use the standard view and hide external faces instead

B. Create a multi-section view by selecting multiple cutting planes

C. Create two separate section views and combine them manually

D. Export the model and edit it in another software

Solution

1. Step 1: Understand multi-section views

   SolidWorks allows creating section views with multiple cutting planes to show complex internal details in one view.

2. Step 2: Compare alternatives

   Creating separate views and combining manually is inefficient; hiding faces or exporting to other software is unnecessary and less clear.

3. Final Answer:

   Create a multi-section view by selecting multiple cutting planes -> Option B

4. Quick Check:

   Multi-section view = multiple planes cut at once [OK]

Hint: Use multi-section view for complex cuts [OK]

Common Mistakes:

• Trying to combine separate views manually
• Hiding faces instead of cutting
• Exporting model unnecessarily