Exploded view creation in Solidworks - Interactive Code Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the code to start creating an exploded view by selecting the {{BLANK_1}} option.

Solidworks

To create an exploded view, first go to the [1] tab in the SolidWorks interface.

Drag options to blanks, or click blank then click option'

AFeatures

BAssembly

CSketch

DEvaluate

Attempts:

3 left

💡 Hint

Common Mistakes

Choosing the Features tab instead of Assembly.

The exploded view creation starts in the Assembly tab where you manage parts and their positions.

2fill in blank

medium

Complete the code to add a new exploded step by clicking the {{BLANK_1}} button.

Solidworks

After opening the exploded view, click the [1] button to add a new exploded step.

Drag options to blanks, or click blank then click option'

AInsert Step

BExplode Step

CNew Step

DAdd Step

Attempts:

3 left

💡 Hint

Common Mistakes

Selecting 'Add Step' which is not the exact button name.

The 'New Step' button is used to add a new exploded step in the exploded view manager.

3fill in blank

hard

Fix the error in the command to move parts by dragging the {{BLANK_1}} handle.

Solidworks

To move parts in the exploded view, drag the [1] handle to reposition components.

Drag options to blanks, or click blank then click option'

Atranslation

Bscale

Crotation

Dselection

Attempts:

3 left

💡 Hint

Common Mistakes

Using the rotation handle which rotates parts instead of moving them.

The translation handle allows you to move parts linearly in the exploded view.

4fill in blank

hard

Fill both blanks to correctly save and exit the exploded view mode.

Solidworks

Click [1] to save the exploded view, then click [2] to exit the mode.

Drag options to blanks, or click blank then click option'

ASave

BClose

CFinish

DApply

Attempts:

3 left

💡 Hint

Common Mistakes

Confusing 'Close' with 'Finish' to exit the mode.

You save your work with 'Save' and finish the exploded view editing with 'Finish'.

5fill in blank

hard

Fill all three blanks to correctly reorder exploded steps using the drag handles and buttons.

Solidworks

Select the exploded step, then drag the [1] handle or use the [2] and [3] buttons to reorder steps.

Drag options to blanks, or click blank then click option'

Amove

Bup

Cdown

Drotate

Attempts:

3 left

💡 Hint

Common Mistakes

Using 'rotate' instead of 'move' handle for reordering.

The 'move' handle lets you drag steps, and 'up' and 'down' buttons reorder steps in the list.

Practice

1. What is the main purpose of creating an exploded view in SolidWorks?

easy

A. To spread parts apart to show assembly details clearly

B. To merge all parts into a single solid body

C. To reduce the file size of the assembly

D. To automatically generate 3D animations

Solution

1. Step 1: Understand exploded view purpose

   An exploded view is used to separate parts visually to show how they fit together.

2. Step 2: Compare options

   Only To spread parts apart to show assembly details clearly describes spreading parts apart to show assembly details, which matches the purpose.

3. Final Answer:

   To spread parts apart to show assembly details clearly -> Option A

4. Quick Check:

   Exploded view = show assembly details [OK]

Hint: Exploded views separate parts visually for clarity [OK]

Common Mistakes:

• Thinking exploded views merge parts
• Confusing exploded views with file compression
• Assuming exploded views create animations automatically

2. Which step correctly describes how to start creating an exploded view in SolidWorks?

easy

A. Use the 'Measure' tool to select parts to explode

B. Click 'File' then 'Save As' and choose exploded view format

C. Right-click the assembly in FeatureManager and select 'New Exploded View'

D. Drag parts directly in the drawing sheet to explode

Solution

1. Step 1: Identify how to start exploded view

   In SolidWorks, exploded views are created from the assembly by right-clicking it in the FeatureManager or ConfigurationManager.

2. Step 2: Evaluate options

   Right-click the assembly in FeatureManager and select 'New Exploded View' correctly states to right-click the assembly and select 'New Exploded View'. Other options describe unrelated actions.

3. Final Answer:

   Right-click the assembly in FeatureManager and select 'New Exploded View' -> Option C

4. Quick Check:

   Start exploded view = right-click assembly [OK]

Hint: Right-click assembly to find exploded view option [OK]

Common Mistakes:

• Trying to save exploded view as a separate file
• Using measure tool to explode parts
• Dragging parts in drawing instead of assembly

3. Given this exploded view step sequence in SolidWorks:
Step 1: Move part A 50mm along X-axis
Step 2: Move part B 30mm along Y-axis
Step 3: Move part C 20mm along Z-axis
What will be the relative position of part B after these steps?

medium

A. Moved 50mm along X-axis and 30mm along Y-axis

B. No movement applied

C. Moved 20mm along Z-axis only

D. Moved 30mm along Y-axis from original position

Solution

1. Step 1: Analyze movement instructions

   Each step moves a different part: Part A moves 50mm X, Part B moves 30mm Y, Part C moves 20mm Z.

2. Step 2: Determine part B's movement

   Part B is only moved 30mm along the Y-axis from its original position.

3. Final Answer:

   Moved 30mm along Y-axis from original position -> Option D

4. Quick Check:

   Part B moves 30mm Y only [OK]

Hint: Each part moves only as specified in its step [OK]

Common Mistakes:

• Adding movements of other parts to part B
• Confusing axis directions
• Assuming cumulative moves for all parts

4. You created an exploded view but parts overlap incorrectly after moving. What is the most likely cause?

medium

A. You used the 'Collapse' command instead of 'Explode'

B. You moved parts without using the correct explode steps or directions

C. You forgot to rebuild the assembly after exploding

D. You saved the exploded view in the wrong file format

Solution

1. Step 1: Identify cause of overlapping parts

   Incorrect overlapping usually happens when parts are moved incorrectly or in wrong directions during explode steps.

2. Step 2: Evaluate options

   You moved parts without using the correct explode steps or directions correctly identifies wrong movement as cause. Other options relate to saving or commands not directly causing overlap.

3. Final Answer:

   You moved parts without using the correct explode steps or directions -> Option B

4. Quick Check:

   Wrong moves cause overlaps [OK]

Hint: Check explode directions if parts overlap [OK]

Common Mistakes:

• Assuming file format affects exploded view layout
• Forgetting to rebuild but expecting overlap fix
• Confusing collapse with explode commands

5. You want to create an exploded view for a complex assembly with multiple subassemblies. Which approach best ensures clarity and ease of use?

hard

A. Create exploded views for each subassembly separately, then combine them in the main assembly

B. Explode all parts at once in the main assembly without subassembly views

C. Use only the default exploded view without customizing part movements

D. Export each subassembly as a separate file and explode outside SolidWorks

Solution

1. Step 1: Understand exploded views in complex assemblies

   For clarity, it's best to manage exploded views at subassembly level before combining.

2. Step 2: Evaluate options for best practice

   Create exploded views for each subassembly separately, then combine them in the main assembly allows clear, manageable exploded views per subassembly, improving clarity and ease of editing.

3. Final Answer:

   Create exploded views for each subassembly separately, then combine them in the main assembly -> Option A

4. Quick Check:

   Subassembly exploded views improve clarity [OK]

Hint: Explode subassemblies first, then main assembly [OK]

Common Mistakes:

• Exploding all parts at once causing confusion
• Relying on default views without customization
• Exporting parts outside SolidWorks unnecessarily