Connection over MAVLink protocol in Drone Programming - Mini Project: Build & Apply

Connection over MAVLink protocol

📖 Scenario: You are building a simple program to connect to a drone using the MAVLink protocol. This connection allows your computer to communicate with the drone to send commands and receive data.

🎯 Goal: Create a program that sets up a connection to a drone using MAVLink, configures the connection parameters, establishes the connection, and then prints a confirmation message.

📋 What You'll Learn

Create a variable with the connection string to the drone

Add a variable for the connection baud rate

Use the MAVLink library to establish the connection using the connection string and baud rate

Print a message confirming the connection is established

💡 Why This Matters

🌍 Real World

Connecting to drones using MAVLink is essential for controlling drones remotely and receiving telemetry data.

💼 Career

Understanding MAVLink connections is important for drone software developers, robotics engineers, and UAV operators.

1

DATA SETUP: Create the connection string

Create a variable called connection_string and set it to the exact value "udp:127.0.0.1:14550".

Drone Programming

# Create a variable called connection_string with the value "udp:127.0.0.1:14550"
# Your code here

Hint

The connection string tells the program where to find the drone. Use the exact string "udp:127.0.0.1:14550".

2

CONFIGURATION: Set the baud rate

Create a variable called baud_rate and set it to the exact value 57600.

Drone Programming

connection_string = "udp:127.0.0.1:14550"
# Create a variable called baud_rate and set it to 57600
# Your code here

Hint

The baud rate is the speed of communication. Use the number 57600 exactly.

3

CORE LOGIC: Establish the MAVLink connection

Import the mavutil module from pymavlink. Then create a variable called master and set it by calling mavutil.mavlink_connection(connection_string, baud=baud_rate).

Drone Programming

connection_string = "udp:127.0.0.1:14550"
baud_rate = 57600
# Import mavutil from pymavlink and create master connection
# Your code here

Hint

Use from pymavlink import mavutil to import. Then call mavutil.mavlink_connection with the variables you created.

4

OUTPUT: Print connection confirmation

Write a print statement that outputs exactly "Connection established to udp:127.0.0.1:14550 at 57600 baud".

Drone Programming

from pymavlink import mavutil

connection_string = "udp:127.0.0.1:14550"
baud_rate = 57600

master = mavutil.mavlink_connection(connection_string, baud=baud_rate)
# Print the connection confirmation message
# Your code here

Hint

Use an f-string to include the variables connection_string and baud_rate in the print message.

Practice

1.

What is the main purpose of using mavutil.mavlink_connection() in drone programming?

easy

A. To establish a communication link with the drone using MAVLink protocol

B. To send video streams from the drone camera

C. To update the drone's firmware automatically

D. To control the drone's battery charging process

Solution

1. Step 1: Understand the function purpose

   mavutil.mavlink_connection() is designed to create a connection channel to communicate with the drone.

2. Step 2: Identify the correct use case

   This function is not for video, firmware, or battery control but for establishing communication over MAVLink.

3. Final Answer:

   To establish a communication link with the drone using MAVLink protocol -> Option A

4. Quick Check:

   Connection function = Establish communication [OK]

Hint: Remember: connection function opens communication channel [OK]

Common Mistakes:

• Confusing connection with video streaming
• Thinking it updates firmware automatically
• Assuming it controls battery charging

2.

Which of the following is the correct way to create a MAVLink connection to a drone on UDP port 14550?

import pymavlink.mavutil as mavutil

connection = ?

easy

A. mavutil.mavlink_connection('http://127.0.0.1:14550')

B. mavutil.mavlink_connection('tcp:127.0.0.1:14550')

C. mavutil.mavlink_connection('serial:/dev/ttyUSB0:115200')

D. mavutil.mavlink_connection('udp:127.0.0.1:14550')

Solution

1. Step 1: Identify the protocol and address format

   UDP connections use the format 'udp:IP:port'. Here, 'udp:127.0.0.1:14550' is correct for UDP on port 14550.

2. Step 2: Eliminate incorrect protocols

   TCP and serial are different protocols; HTTP is not used for MAVLink connections.

3. Final Answer:

   mavutil.mavlink_connection('udp:127.0.0.1:14550') -> Option D

4. Quick Check:

   UDP connection string = 'udp:IP:port' [OK]

Hint: UDP uses 'udp:IP:port' format for connection strings [OK]

Common Mistakes:

• Using TCP or HTTP instead of UDP for UDP connection
• Confusing serial port syntax with UDP
• Missing the 'udp:' prefix

3.

What will the following code print if the drone sends a heartbeat message?

from pymavlink import mavutil

conn = mavutil.mavlink_connection('udp:127.0.0.1:14550')
msg = conn.recv_match(type='HEARTBEAT', blocking=True)
print(msg.get_type())

medium

A. HEARTBEAT_MESSAGE

B. None

C. HEARTBEAT

D. ERROR

Solution

1. Step 1: Understand recv_match with type='HEARTBEAT'

   The code waits (blocking=True) until it receives a heartbeat message from the drone.

2. Step 2: Check what get_type() returns

   The get_type() method returns the message type as a string, which will be 'HEARTBEAT' for heartbeat messages.

3. Final Answer:

   HEARTBEAT -> Option C

4. Quick Check:

   Heartbeat message type = 'HEARTBEAT' [OK]

Hint: recv_match blocks until message type received, get_type returns type name [OK]

Common Mistakes:

• Expecting None if message received
• Confusing message type string with error
• Assuming get_type returns full message object

4.

Identify the error in this code snippet that tries to connect and wait for a heartbeat:

from pymavlink import mavutil

conn = mavutil.mavlink_connection('udp:127.0.0.1:14550')
msg = conn.recv_match(type='heartbeat', blocking=True)
print(msg)

medium

A. recv_match does not support blocking=True

B. The message type string should be uppercase 'HEARTBEAT'

C. The connection string is missing the port number

D. print(msg) should be print(msg.get_type())

Solution

1. Step 1: Check message type case sensitivity

   MAVLink message types are case sensitive and must be uppercase, so 'heartbeat' is incorrect; it should be 'HEARTBEAT'.

2. Step 2: Verify other parts

   The connection string includes port 14550 correctly; recv_match supports blocking=True; print(msg) is valid to print the message object.

3. Final Answer:

   The message type string should be uppercase 'HEARTBEAT' -> Option B

4. Quick Check:

   Message type strings are uppercase [OK]

Hint: MAVLink message types are uppercase strings [OK]

Common Mistakes:

• Using lowercase message type strings
• Assuming blocking=True is invalid
• Confusing print output with error

5.

You want to write a program that connects to a drone over serial port /dev/ttyUSB0 at 57600 baud, waits for a heartbeat, and then prints "Connected to drone". Which code snippet correctly does this?

hard

A. from pymavlink import mavutil
conn = mavutil.mavlink_connection('serial:/dev/ttyUSB0:57600')
conn.wait_heartbeat()
print('Connected to drone')

B. from pymavlink import mavutil
conn = mavutil.mavlink_connection('udp:/dev/ttyUSB0:57600')
conn.wait_heartbeat()
print('Connected to drone')

C. from pymavlink import mavutil
conn = mavutil.mavlink_connection('serial:/dev/ttyUSB0')
conn.recv_match(type='HEARTBEAT', blocking=False)
print('Connected to drone')

D. from pymavlink import mavutil
conn = mavutil.mavlink_connection('serial:/dev/ttyUSB0:57600')
msg = conn.recv_match(type='heartbeat', blocking=True)
print('Connected to drone')

Solution

1. Step 1: Check connection string format for serial

   The correct format is 'serial:/dev/ttyUSB0:57600' to specify port and baud rate.

2. Step 2: Use wait_heartbeat() to block until heartbeat

   Using conn.wait_heartbeat() waits properly for the heartbeat message before continuing.

3. Step 3: Confirm print statement

   After heartbeat, printing 'Connected to drone' confirms success.

4. Final Answer:

   from pymavlink import mavutil conn = mavutil.mavlink_connection('serial:/dev/ttyUSB0:57600') conn.wait_heartbeat() print('Connected to drone') -> Option A

5. Quick Check:

   Serial connection + wait_heartbeat = correct setup [OK]

Hint: Use wait_heartbeat() after serial connection to confirm link [OK]

Common Mistakes:

• Using UDP instead of serial for serial port
• Using lowercase 'heartbeat' in recv_match
• Not specifying baud rate in connection string