REVOLVE command in AutoCAD - Cell-by-Cell Formula Trace

Sample Data

This data represents parameters for the REVOLVE command in AutoCAD: the length of the profile to revolve, the start and end points of the axis of revolution, and the angle of revolution.

Cell	Value
A1	Profile Length
B1	5
A2	Axis Start X
B2	0
A3	Axis Start Y
B3	0
A4	Axis End X
B4	0
A5	Axis End Y
B5	10
A6	Revolve Angle
B6	360

Formula Trace

REVOLVE(Profile, Axis_Start, Axis_End, Angle)

Step 1: Profile length = 5 units

Step 2: Axis defined from (0,0) to (0,10)

Step 3: Revolve angle = 360 degrees

Step 4: Revolve profile of length 5 around vertical axis by 360 degrees

Cell Reference Map

    A       B
  +-------+-------+
1 |Profile|   5   |
  +-------+-------+
2 |AxisStX|   0   |
  +-------+-------+
3 |AxisStY|   0   |
  +-------+-------+
4 |AxisEnX|   0   |
  +-------+-------+
5 |AxisEnY|  10   |
  +-------+-------+
6 |Angle  |  360  |
  +-------+-------+

Cells B1 to B6 provide the parameters for the REVOLVE command: profile length, axis start and end coordinates, and revolve angle.

Result

    A       B       C
  +-------+-------+---------+
1 |Profile|   5   |         |
  +-------+-------+---------+
2 |AxisStX|   0   |         |
  +-------+-------+---------+
3 |AxisStY|   0   |         |
  +-------+-------+---------+
4 |AxisEnX|   0   |         |
  +-------+-------+---------+
5 |AxisEnY|  10   |         |
  +-------+-------+---------+
6 |Angle  |  360  | Result: |
  +-------+-------+---------+
7 |       |       | Solid   |
  +-------+-------+---------+
8 |       |       | Cylinder|
  +-------+-------+---------+

The result of the REVOLVE command is a solid 3D shape (a cylinder) created by revolving the profile of length 5 units around the vertical axis from (0,0) to (0,10) by 360 degrees.

Sheet Trace Quiz - 3 Questions

What does the value in cell B6 represent in the REVOLVE command?

A Length of the profile

B Angle of revolution

C X coordinate of axis start

D Y coordinate of axis end

Key Result

REVOLVE(Profile, Axis_Start, Axis_End, Angle) rotates a 2D profile around a defined axis by a specified angle to create a 3D solid.

Practice

1.

What does the REVOLVE command do in AutoCAD?

easy

A. It changes the color of a 2D shape.

B. It copies objects to multiple locations.

C. It creates a 3D object by spinning a 2D shape around an axis.

D. It flattens 3D objects into 2D drawings.

Solution

1. Step 1: Understand the purpose of REVOLVE

   The REVOLVE command spins a 2D shape around an axis to create a 3D object.

2. Step 2: Compare options

   "It creates a 3D object by spinning a 2D shape around an axis." is the only description that matches REVOLVE; others describe unrelated actions.

3. Final Answer:

   It creates a 3D object by spinning a 2D shape around an axis. -> Option C

4. Quick Check:

   REVOLVE = 3D spin [OK]

Hint: REVOLVE spins 2D shapes into 3D objects [OK]

Common Mistakes:

• Confusing REVOLVE with COPY command
• Thinking REVOLVE changes colors
• Assuming REVOLVE flattens objects

2.

Which of the following is the correct basic syntax to start the REVOLVE command in AutoCAD?

easy

A. Type REVOLVE3D and press Enter.

B. Type REVOLVE and press Enter.

C. Type REVOLV and press Enter.

D. Type REV and press Enter.

Solution

1. Step 1: Recall the exact command name

   The correct command to start revolve is REVOLVE.

2. Step 2: Check options for exact match

   Only "Type REVOLVE and press Enter." matches the exact command name; others are incorrect or incomplete.

3. Final Answer:

   Type REVOLVE and press Enter. -> Option B

4. Quick Check:

   Command name = REVOLVE [OK]

Hint: Type full command REVOLVE to avoid errors [OK]

Common Mistakes:

• Typing incomplete command names
• Adding extra characters to command
• Using abbreviations not recognized

3.

Given a 2D semicircle with radius 5 units, if you use the REVOLVE command to spin it 360 degrees around its straight edge, what 3D shape will you get?

medium

A. A sphere with radius 5 units.

B. A cylinder with height 5 units.

C. A cone with base radius 5 units.

D. A torus (donut shape).

Solution

1. Step 1: Understand the shape and axis

   Revolving a semicircle around its straight edge spins the curve fully, creating a sphere.

2. Step 2: Match shape to options

   A full revolution of a semicircle creates a sphere, not cylinder, cone, or torus.

3. Final Answer:

   A sphere with radius 5 units. -> Option A

4. Quick Check:

   Semicircle revolve 360° = Sphere [OK]

Hint: Revolve semicircle fully = sphere [OK]

Common Mistakes:

• Confusing cylinder with sphere
• Thinking partial revolve creates cone
• Assuming torus needs semicircle

4.

What is wrong with this use of the REVOLVE command?
REVOLVE a 2D line around an axis to create a 3D object.

medium

A. You must specify the angle as 180 degrees or less.

B. The axis must be a circle, not a line.

C. REVOLVE only works on closed 2D shapes.

D. A single line cannot be revolved to create a solid 3D object.

Solution

1. Step 1: Analyze the shape type

   A single 2D line has no area, so revolving it creates only a surface, not a solid.

2. Step 2: Check axis and angle requirements

   The axis can be any line; REVOLVE works on open or closed shapes; angle can be any value.

3. Final Answer:

   A single line cannot be revolved to create a solid 3D object. -> Option D

4. Quick Check:

   Line revolve ≠ solid [OK]

Hint: Revolve needs area, not just a line [OK]

Common Mistakes:

• Thinking axis must be circle
• Believing REVOLVE needs closed shapes only
• Assuming angle limit is 180 degrees

5.

You want to create a vase shape by revolving a 2D profile. The profile is an open curve with a base line and a curved outline. Which steps should you follow to get a smooth 3D vase using the REVOLVE command?

hard

A. Select the open profile, specify the base line as axis, and revolve 360 degrees.

B. Close the profile shape, select it, specify any axis, and revolve 180 degrees.

C. Select only the curved outline, specify the base line as axis, and revolve 90 degrees.

D. Use the base line as axis, revolve 360 degrees, then extrude the shape.

Solution

1. Step 1: Prepare the profile and axis

   Use the open profile including base line; base line is the axis for revolve.

2. Step 2: Apply revolve with full rotation

   Revolve 360 degrees around base line to create smooth vase shape.

3. Final Answer:

   Select the open profile, specify the base line as axis, and revolve 360 degrees. -> Option A

4. Quick Check:

   Open profile + base line axis + 360° revolve = vase [OK]

Hint: Revolve open profile 360° around base line for vase [OK]

Common Mistakes:

• Not using full 360 degrees revolve
• Revolving only curved outline without base line
• Trying to extrude after revolve unnecessarily