Single-line text (DTEXT) in AutoCAD - Cell-by-Cell Formula Trace

Sample Data

Sample text entries in cells representing single-line text values.

Cell	Value
A1	Hello
A2	World
A3	123
A4	Test

Formula Trace

CONCATENATE(A1, " ", A2)

Step 1: A1

Step 2: " "

Step 3: A2

Step 4: CONCATENATE("Hello", " ", "World")

Cell Reference Map

Hello

↓

World

↓

123

↓

Test

Cells A1 and A2 are referenced to combine their text values with a space.

Result

Hello

↓

World

↓

123

↓

Test

↓

Hello World

The result 'Hello World' is shown in cell A5 as the concatenation of A1 and A2 with a space.

Sheet Trace Quiz - 3 Questions

What is the value of A1 in the sample data?

A 123

B Hello

C World

D Test

Key Result

CONCATENATE joins multiple text values into one single-line text string.

Practice

1. What is the primary purpose of the DTEXT command in AutoCAD?

easy

A. To add single-line text labels in drawings

B. To create multi-line paragraphs of text

C. To draw lines between points

D. To insert images into the drawing

Solution

1. Step 1: Understand the function of DTEXT

   DTEXT is used to add single-line text labels in AutoCAD drawings.

2. Step 2: Compare with other options

   Multi-line text uses a different command (MTEXT), lines are drawn with LINE command, and images are inserted differently.

3. Final Answer:

   To add single-line text labels in drawings -> Option A

4. Quick Check:

   DTEXT = single-line text [OK]

Hint: DTEXT means single-line text label [OK]

Common Mistakes:

• Confusing DTEXT with MTEXT for multi-line text
• Thinking DTEXT draws lines
• Assuming DTEXT inserts images

2. Which of the following is the correct syntax to start the DTEXT command in AutoCAD?

easy

A. SINGLELINE

B. TEXTLINE

C. DTEXT

D. MTEXT

Solution

1. Step 1: Recall the command name for single-line text

   The correct command to start single-line text is DTEXT.

2. Step 2: Eliminate incorrect options

   TEXTLINE and SINGLELINE are not valid AutoCAD commands; MTEXT is for multi-line text.

3. Final Answer:

   DTEXT -> Option C

4. Quick Check:

   Command to add single-line text = DTEXT [OK]

Hint: DTEXT is the exact command name for single-line text [OK]

Common Mistakes:

• Using MTEXT instead of DTEXT
• Typing TEXTLINE which is invalid
• Assuming SINGLELINE is a command

3. What will happen if you enter the DTEXT command and specify a start point but press Enter without typing any text?

medium

A. AutoCAD will create an empty text object

B. AutoCAD will cancel the DTEXT command

C. AutoCAD will prompt for text again

D. AutoCAD will insert default text 'Text'

Solution

1. Step 1: Understand DTEXT behavior on empty input

   If no text is typed and Enter is pressed, AutoCAD cancels the DTEXT command without creating text.

2. Step 2: Compare other options

   It does not create empty text, nor insert default text, nor prompt again automatically.

3. Final Answer:

   AutoCAD will cancel the DTEXT command -> Option B

4. Quick Check:

   Empty input cancels DTEXT [OK]

Hint: Pressing Enter without text cancels DTEXT [OK]

Common Mistakes:

• Expecting empty text to be created
• Thinking default text is inserted
• Assuming command prompts again automatically

4. You tried to add single-line text using DTEXT but the text does not appear after specifying the start point and typing text. What is the most likely cause?

medium

A. DTEXT command does not support text input

B. You forgot to specify the start point

C. The drawing is locked

D. The text height is set to zero

Solution

1. Step 1: Check common DTEXT issues

   If text does not appear, a common cause is text height set to zero, making text invisible.

2. Step 2: Evaluate other options

   Start point was specified, drawing lock prevents edits but usually shows error, and DTEXT supports text input.

3. Final Answer:

   The text height is set to zero -> Option D

4. Quick Check:

   Zero text height hides text [OK]

Hint: Check text height if text is invisible [OK]

Common Mistakes:

• Assuming DTEXT does not support text input
• Forgetting to specify start point (usually prompts error)
• Ignoring text height settings

5. You want to add a short label at coordinates (100, 200) using DTEXT with a text height of 5 units. Which sequence of steps is correct?

hard

A. Start DTEXT, specify start point (100,200), enter text height 5, type label text, press Enter

B. Start DTEXT, type label text, specify start point (100,200), enter text height 5, press Enter

C. Start DTEXT, specify start point (100,200), type label text, enter text height 5, press Enter

D. Start DTEXT, enter text height 5, specify start point (100,200), type label text, press Enter

Solution

1. Step 1: Recall DTEXT input order

   DTEXT first asks for start point, then text height, then text input.

2. Step 2: Match steps with options

   Start DTEXT, specify start point (100,200), enter text height 5, type label text, press Enter follows correct order: start point, text height, text, Enter.

3. Final Answer:

   Start DTEXT, specify start point (100,200), enter text height 5, type label text, press Enter -> Option A

4. Quick Check:

   DTEXT input order = start point, height, text [OK]

Hint: DTEXT order: start point, height, text [OK]

Common Mistakes:

• Typing text before specifying start point
• Entering text height after text input
• Skipping text height input