Printing to PDF in AutoCAD - Cell-by-Cell Formula Trace

Sample Data

This table shows two AutoCAD layouts with their printing settings to PDF: plotter name, paper size, plot area, and scale.

Cell	Value
A1	Layout Name
B1	Plotter
C1	Paper Size
D1	Plot Area
E1	Plot Scale
A2	Layout1
B2	DWG To PDF.pc3
C2	A3
D2	Layout
E2	1:1
A3	Layout2
B3	DWG To PDF.pc3
C3	A4
D3	Extents
E3	1:2

Formula Trace

IF(B2="DWG To PDF.pc3", "Print to PDF", "Print to Printer")

Step 1: B2="DWG To PDF.pc3"

Step 2: IF(TRUE, "Print to PDF", "Print to Printer")

Cell Reference Map

   A       B               C       D        E
1 Layout  Plotter        Paper  Plot     Plot
  Name                Size   Area     Scale
2 Layout1 DWG To PDF.pc3  A3    Layout   1:1
3 Layout2 DWG To PDF.pc3  A4    Extents  1:2

Arrow: B2 -> formula condition check

The formula checks the plotter setting in cell B2 to decide if the output is PDF or printer.

Result

   A       B               C       D        E        F
1 Layout  Plotter        Paper  Plot     Plot     Output
  Name                Size   Area     Scale
2 Layout1 DWG To PDF.pc3  A3    Layout   1:1    Print to PDF
3 Layout2 DWG To PDF.pc3  A4    Extents  1:2    (not evaluated here)

The formula result 'Print to PDF' is shown in column F for Layout1, indicating this layout will print to PDF.

Sheet Trace Quiz - 3 Questions

What does the formula check in cell B2?

A If the plotter is set to print to PDF

B If the paper size is A3

C If the plot scale is 1:1

D If the plot area is Layout

Key Result

IF(condition, value_if_true, value_if_false) returns one of two outputs based on a condition.

Practice

1. What is the main purpose of printing an AutoCAD drawing to PDF?

easy

A. To edit the drawing directly in PDF format

B. To convert the drawing into a 3D model

C. To save the drawing as a file that is easy to share and view

D. To change the drawing's color scheme automatically

Solution

1. Step 1: Understand PDF purpose in AutoCAD

   Printing to PDF creates a file format that anyone can open without AutoCAD.

2. Step 2: Compare options

   Only To save the drawing as a file that is easy to share and view describes saving for easy sharing and viewing, which matches PDF use.

3. Final Answer:

   To save the drawing as a file that is easy to share and view -> Option C

4. Quick Check:

   PDF saves drawings for sharing = B [OK]

Hint: PDFs are for sharing, not editing drawings [OK]

Common Mistakes:

• Thinking PDF allows direct drawing edits
• Confusing PDF with 3D model formats
• Assuming PDF changes drawing colors

2. Which printer option should you select in AutoCAD's Plot dialog to print to PDF?

easy

A. DWG To PDF.pc3

B. HP LaserJet

C. Microsoft XPS Document Writer

D. Canon Inkjet

Solution

1. Step 1: Identify the built-in PDF printer in AutoCAD

   AutoCAD includes a printer named 'DWG To PDF.pc3' specifically for PDF output.

2. Step 2: Eliminate other printer options

   Other options are physical or unrelated printers, not for PDF creation.

3. Final Answer:

   DWG To PDF.pc3 -> Option A

4. Quick Check:

   Use 'DWG To PDF.pc3' for PDF printing = D [OK]

Hint: Look for 'DWG To PDF.pc3' in printer list [OK]

Common Mistakes:

• Choosing physical printers instead of PDF printer
• Selecting unrelated virtual printers
• Not noticing the '.pc3' file extension

3. If you set the paper size to A3, plot area to 'Window', and scale to 1:2 before printing to PDF, what will happen?

medium

A. The PDF will print on A4 paper ignoring settings

B. The PDF will print the entire drawing at full size on A3 paper

C. The PDF will be blank because scale 1:2 is invalid

D. The PDF will show a half-size section of the drawing on A3 paper

Solution

1. Step 1: Understand plot area 'Window' and scale 1:2

   'Window' means you select a part of the drawing; scale 1:2 means drawing is half size on paper.

2. Step 2: Consider paper size A3

   The selected window will print at half size on A3 paper, showing a portion of the drawing.

3. Final Answer:

   The PDF will show a half-size section of the drawing on A3 paper -> Option D

4. Quick Check:

   Window + scale 1:2 = half-size section on A3 [OK]

Hint: Window + scale 1:2 means half-size selected area [OK]

Common Mistakes:

• Assuming full drawing prints with 'Window' selected
• Thinking scale 1:2 is invalid
• Ignoring paper size setting

4. You tried printing to PDF but the output file is blank. Which step likely caused this issue?

medium

A. Not selecting a plot area before printing

B. Choosing 'DWG To PDF.pc3' as the printer

C. Setting paper size to A4

D. Saving the PDF with a .dwg extension

Solution

1. Step 1: Analyze blank PDF cause

   If no plot area is selected, AutoCAD has no drawing part to print, resulting in a blank PDF.

2. Step 2: Check other options

   Using correct printer and paper size won't cause blank output; wrong file extension affects file type but not blank content.

3. Final Answer:

   Not selecting a plot area before printing -> Option A

4. Quick Check:

   Missing plot area = blank PDF [OK]

Hint: Always select plot area to avoid blank PDFs [OK]

Common Mistakes:

• Ignoring plot area selection
• Confusing file extension with content
• Assuming printer choice causes blank output

5. You want to print multiple layouts from your AutoCAD file into a single PDF file. What is the best approach?

hard

A. Export each layout as a DWG and then convert to PDF

B. Use the 'Publish' command and select 'Multi-sheet file' to create one PDF

C. Print each layout separately using 'DWG To PDF.pc3' and merge PDFs manually

D. Print all layouts at once by selecting multiple printers

Solution

1. Step 1: Understand multi-layout PDF creation

   The 'Publish' command in AutoCAD allows printing multiple layouts into one PDF file efficiently.

2. Step 2: Evaluate other options

   Printing separately and merging is manual and inefficient; exporting DWG doesn't create PDFs; selecting multiple printers is not possible.

3. Final Answer:

   Use the 'Publish' command and select 'Multi-sheet file' to create one PDF -> Option B

4. Quick Check:

   Publish command creates multi-layout PDF = C [OK]

Hint: Use 'Publish' for multi-layout PDFs in one file [OK]

Common Mistakes:

• Printing layouts separately and merging later
• Trying to print multiple printers simultaneously
• Exporting DWG instead of PDF