MOVE command in AutoCAD - Practice Problems & Coding Challenges

Challenge - 5 Problems

🧠 Conceptual

intermediate

Understanding the MOVE command basics

What is the primary purpose of the MOVE command in AutoCAD?

A To relocate an object from one place to another

B To change the size of an object

C To rotate an object around a point

D To delete an object from the drawing

💡 Hint

Think about what happens when you want to place an object somewhere else without changing its shape.

The MOVE command allows you to pick an object and place it at a different location without altering its size or shape.

🎯 Scenario

intermediate

Using MOVE with base point and displacement

You want to move a door object 5 units to the right and 3 units up. Which sequence correctly uses the MOVE command?

A Select door > ROTATE > base point 0,0 > angle 5,3

B Select door > MOVE > base point anywhere > displacement 5,3

C Select door > SCALE > base point 5,3 > factor 1

D Select door > COPY > base point 5,3 > displacement 0,0

💡 Hint

Remember MOVE uses a base point and a displacement vector to relocate objects.

The MOVE command requires selecting the object, specifying a base point, then entering the displacement coordinates to move the object precisely.

❓ dax_lod_result

advanced

Calculating total moved objects count

In a BI report tracking AutoCAD commands, you have a table 'Commands' with columns 'CommandName' and 'Count'. You want a measure that sums counts only for MOVE commands.

Which DAX measure correctly calculates this?

A TotalMove = SUM(Commands[Count])

B TotalMove = CALCULATE(SUM(Commands[Count]), Commands[CommandName] = "MOVE")

C TotalMove = SUMX(FILTER(Commands, Commands[CommandName] = "MOVE"), Commands[Count])

D TotalMove = CALCULATE(SUM(Commands[Count]), FILTER(Commands, Commands[CommandName] = "MOVE"))

💡 Hint

CALCULATE needs a filter expression wrapped in FILTER for row context.

Option D uses CALCULATE with FILTER to sum counts only where CommandName is MOVE, which is the correct syntax.

❓ visualization

advanced

Best visualization for MOVE command usage over time

You want to show how often the MOVE command is used each month in a dashboard. Which visualization type is best to show trends over time?

A Stacked bar chart showing all commands usage in one month

B Scatter plot showing MOVE command usage vs. other commands

C Line chart showing MOVE command usage over months

D Pie chart showing MOVE command usage by month

💡 Hint

Think about which chart type best shows changes over time.

Line charts are ideal for showing trends over time, making it easy to see how MOVE command usage changes month to month.

🔧 Formula Fix

expert

Debugging MOVE command measure with incorrect filter

A DAX measure intended to count MOVE command usage is not filtering correctly. Identify the error in this measure:

TotalMove = CALCULATE(SUM(Commands[Count]), Commands[CommandName] == "MOVE")

What is the issue?

A Using double equals (==) instead of single equals (=) causes syntax error

B SUM function cannot be used inside CALCULATE

C Commands[CommandName] should be wrapped in FILTER function

D CALCULATE cannot filter text columns

💡 Hint

Check the syntax for equality comparison in DAX filter expressions.

DAX uses a single equals sign (=) for comparisons inside CALCULATE filters. Double equals (==) is invalid and causes syntax error.

Practice

1.

What does the MOVE command do in AutoCAD?

easy

A. It shifts selected objects from one location to another.

B. It copies objects without changing their position.

C. It deletes selected objects from the drawing.

D. It changes the color of selected objects.

Solution

1. Step 1: Understand the purpose of MOVE command

   The MOVE command is designed to relocate objects within the drawing space.

2. Step 2: Compare options with MOVE functionality

   Only It shifts selected objects from one location to another. describes shifting objects, which matches the MOVE command's function.

3. Final Answer:

   It shifts selected objects from one location to another. -> Option A

4. Quick Check:

   MOVE = shift objects [OK]

Hint: MOVE shifts objects; it does not copy or delete [OK]

Common Mistakes:

• Confusing MOVE with COPY command
• Thinking MOVE deletes objects
• Assuming MOVE changes object properties like color

2.

Which of the following is the correct syntax to start the MOVE command in AutoCAD?

_move, move, MOVE, or mv

easy

A. _move

B. mv

C. move

D. mov

Solution

1. Step 1: Recognize AutoCAD command syntax

   AutoCAD commands often start with an underscore (_) for compatibility across languages.

2. Step 2: Identify the correct command form

   "_move" is the correct syntax to start the MOVE command universally.

3. Final Answer:

   _move -> Option A

4. Quick Check:

   Use underscore for commands: _move [OK]

Hint: Use underscore (_) before commands for universal syntax [OK]

Common Mistakes:

• Typing 'mv' instead of 'move'
• Omitting underscore causing command not found
• Using incorrect abbreviations like 'mov'

3.

You select a rectangle at coordinates (2,3) and use the MOVE command with base point (2,3) and second point (5,7). What will be the new coordinates of the rectangle's lower-left corner?

medium

A. (2,3)

B. (3,4)

C. (7,10)

D. (5,7)

Solution

1. Step 1: Calculate the move vector

   The move vector is from base point (2,3) to second point (5,7), so vector = (5-2, 7-3) = (3,4).

2. Step 2: Apply move vector to original point

   Original lower-left corner at (2,3) plus vector (3,4) results in (2+3, 3+4) = (5,7).

3. Final Answer:

   (5,7) -> Option D

4. Quick Check:

   New point = old point + move vector = (5,7) [OK]

Hint: Add vector (second point - base point) to original coordinates [OK]

Common Mistakes:

• Using base point coordinates as new location
• Adding coordinates incorrectly
• Confusing base and second points

4.

When using the MOVE command, you accidentally select the wrong base point. What is the likely result?

medium

A. The command cancels automatically.

B. Objects get deleted.

C. Objects move to an unexpected location.

D. The MOVE command changes object color.

Solution

1. Step 1: Understand the role of base point in MOVE

   The base point is the reference from which the move vector is calculated.

2. Step 2: Effect of wrong base point

   If the base point is wrong, the move vector is incorrect, so objects move to wrong places.

3. Final Answer:

   Objects move to an unexpected location. -> Option C

4. Quick Check:

   Wrong base point = wrong move location [OK]

Hint: Choose base point carefully to avoid wrong moves [OK]

Common Mistakes:

• Expecting command to cancel on wrong base point
• Thinking objects get deleted
• Assuming color changes after move

5.

You want to move multiple objects so their center aligns exactly at point (10,10). The objects' current centers are at (4,6), (7,8), and (9,5). What base point and second point should you use for the MOVE command on each object?

hard

A. Base point: (10,10); Second point: (0,0)

B. Base point: object's center; Second point: (10,10)

C. Base point: (0,0); Second point: (10,10)

D. Base point: (10,10); Second point: object's center

Solution

1. Step 1: Identify how to align centers

   To move each object so its center reaches (10,10), use the object's current center as base point.

2. Step 2: Use (10,10) as second point

   The second point is the target location where you want the center to move.

3. Final Answer:

   Base point: object's center; Second point: (10,10) -> Option B

4. Quick Check:

   Move vector = (10,10) - object's center [OK]

Hint: Base point = current center; second point = target center [OK]

Common Mistakes:

• Swapping base and second points
• Using fixed base point (0,0) incorrectly
• Not moving each object individually