Bird
Raised Fist0
AutoCADbi_tool~8 mins

MIRROR command in AutoCAD - Dashboard Guide

Choose your learning style10 modes available
LearnWhyDeepSheetTryChallengeScenarioRecallDash
Dashboard Mode - MIRROR command
Goal

Understand how the MIRROR command duplicates objects symmetrically in AutoCAD to create mirrored designs efficiently.

Sample Data
Object IDTypeCoordinates (X,Y)Length
1Line(2,3) to (5,3)3
2CircleCenter (4,4)Radius 1
3RectangleCorner1 (1,1), Corner2 (3,2)Width 2, Height 1
4Line(6,2) to (8,2)2
5CircleCenter (7,3)Radius 1.5
Dashboard Components
  • KPI Card: Total Objects Before Mirror = 5
  • KPI Card: Total Objects After Mirror = 10 (original 5 + 5 mirrored)
  • Table: Original Objects List (Object ID, Type, Coordinates, Length)
  • Table: Mirrored Objects List (Object ID, Type, Coordinates, Length) - coordinates mirrored across mirror line
  • Chart: Scatter plot showing original and mirrored object positions for visual comparison

Mirror Line: Vertical line at X=5 used as axis for mirroring

Formula for Mirrored X coordinate: X_mirrored = 2 * X_mirror_line - X_original

Dashboard Layout
+----------------------+----------------------+
|      KPI: Total      |      KPI: Total      |
|   Objects Before     |    Objects After     |
|        Mirror        |       Mirror         |
+----------------------+----------------------+
|      Original Objects List (Table)       |
+------------------------------------------+
|      Mirrored Objects List (Table)       |
+------------------------------------------+
|        Scatter Plot: Original vs Mirror  |
+------------------------------------------+
Interactivity

User can select the mirror line position (default at X=5). Changing this updates the mirrored objects' coordinates in the mirrored objects table and the scatter plot. Selecting an object in either table highlights it in the scatter plot for easy comparison.

Self Check

If you change the mirror line from X=5 to X=6, which components update?

  • Mirrored Objects List updates coordinates based on new mirror line.
  • Scatter Plot updates to show new mirrored positions.
  • KPI for Total Objects After Mirror remains the same (still 10).
  • Original Objects List and KPI for Total Objects Before Mirror remain unchanged.
Key Result
Dashboard showing original and mirrored AutoCAD objects with coordinates mirrored across a vertical line.

Practice

(1/5)
1. What does the MIRROR command do in AutoCAD?
easy
A. Creates a flipped copy of selected objects
B. Deletes selected objects permanently
C. Rotates objects around a point
D. Scales objects to a new size

Solution

  1. Step 1: Understand the MIRROR command purpose

    The MIRROR command is used to create a flipped copy of selected objects across a mirror line.

  2. Step 2: Compare options with command function

    Only Creates a flipped copy of selected objects describes creating a flipped copy, which matches the MIRROR command's function.

  3. Final Answer:

    Creates a flipped copy of selected objects -> Option A

  4. Quick Check:

    MIRROR = flipped copy [OK]
Hint: MIRROR flips objects like a reflection [OK]
Common Mistakes:
  • Confusing MIRROR with DELETE command
  • Thinking MIRROR rotates objects
  • Assuming MIRROR scales objects
2. Which of the following is the correct syntax to start the MIRROR command in AutoCAD?
easy
A. MIRR
B. MIRROR
C. MIRRORR
D. MIR

Solution

  1. Step 1: Recall the exact command name

    The correct command to start mirroring is MIRROR.

  2. Step 2: Check each option for correctness

    Only MIRROR matches the full and correct command name; others are incorrect or invalid.

  3. Final Answer:

    MIRROR -> Option B

  4. Quick Check:

    Command syntax = MIRROR [OK]
Hint: Type full command MIRROR to avoid errors [OK]
Common Mistakes:
  • Using incomplete command like MIR or MIRR
  • Adding extra letters like MIRRORR
  • Assuming abbreviations always work
3. You select a rectangle and use the MIRROR command with mirror line points at (0,0) and (0,5). You choose to keep the original objects. What will be the result?
medium
A. The rectangle is deleted and replaced by a flipped copy
B. Only the original rectangle remains, no copy created
C. A flipped copy of the rectangle across the vertical line x=0, plus the original rectangle
D. A rotated copy of the rectangle around point (0,0)

Solution

  1. Step 1: Identify mirror line and effect

    The mirror line is vertical at x=0, so the rectangle will be flipped horizontally across this line.

  2. Step 2: Consider the option to keep original objects

    Choosing to keep originals means both the original and flipped copy will appear.

  3. Final Answer:

    A flipped copy of the rectangle across the vertical line x=0, plus the original rectangle -> Option C

  4. Quick Check:

    Mirror line vertical + keep original = flipped copy + original [OK]
Hint: Mirror line flips; keep original means both appear [OK]
Common Mistakes:
  • Thinking original is deleted when 'keep' is chosen
  • Confusing mirror with rotation
  • Ignoring mirror line orientation
4. You tried to mirror a circle but after entering the two mirror points, AutoCAD gave an error and did not create the mirrored object. What is the most likely cause?
medium
A. The two mirror points are the same point
B. The circle is locked and cannot be mirrored
C. You forgot to select the circle before starting MIRROR
D. The MIRROR command does not work on circles

Solution

  1. Step 1: Analyze mirror line points

    If the two mirror points are the same, the mirror line is invalid (zero length), causing an error.

  2. Step 2: Check other options

    Circles can be mirrored, and selection is required before command, but error after points means mirror line issue.

  3. Final Answer:

    The two mirror points are the same point -> Option A

  4. Quick Check:

    Mirror line must have two distinct points [OK]
Hint: Mirror line needs two different points [OK]
Common Mistakes:
  • Assuming MIRROR can't work on circles
  • Forgetting to select objects before MIRROR
  • Ignoring mirror line validity
5. You want to create a symmetrical floor plan by mirroring half of the design along a horizontal axis at y=10, keeping both the original and mirrored halves. Which steps should you follow?
hard
A. Select half design -> ROTATE command -> pick center (0,10) -> rotate 180 degrees
B. Select half design -> MIRROR command -> pick mirror line points (0,10) and (5,10) -> choose 'No' to keep original
C. Select full design -> MIRROR command -> pick mirror line points (0,0) and (10,0) -> choose 'No' to keep original
D. Select half design -> MIRROR command -> pick mirror line points (0,10) and (5,10) -> choose 'Yes' to keep original

Solution

  1. Step 1: Select the correct half and mirror line

    Select the half design to mirror and use a horizontal mirror line at y=10 by picking points (0,10) and (5,10).

  2. Step 2: Choose to keep original after mirroring

    Choosing 'Yes' to "Erase source objects?" means the original objects are kept, so both the original and mirrored halves appear to form the symmetrical floor plan.

  3. Final Answer:

    Select half design -> MIRROR command -> pick mirror line points (0,10) and (5,10) -> choose 'Yes' to keep original -> Option D

  4. Quick Check:

    Mirror half + horizontal line + keep original = symmetrical plan [OK]
Hint: Pick mirror line, choose 'Yes' to keep original [OK]
Common Mistakes:
  • Choosing 'No' deletes original, leaving only mirrored side
  • Using ROTATE instead of MIRROR
  • Selecting full design instead of half
Recommended

Ready to prove it?

Pass the test and this pattern moves unknown strong while earning +1 Grip toward your certificate.

10 questions~5 mineasy hard