ELLIPSE command in AutoCAD - Cheat Sheet & Quick Revision

Recall & Review

beginner

What does the ELLIPSE command do in AutoCAD?

The ELLIPSE command creates an ellipse, which is a smooth, oval shape defined by two axes: a major axis and a minor axis.

beginner

How do you start drawing an ellipse using the ELLIPSE command?

You start by specifying the center point of the ellipse, then define the endpoint of the major axis, and finally the length of the minor axis.

beginner

What is the difference between the major axis and the minor axis in an ellipse?

The major axis is the longest diameter of the ellipse, while the minor axis is the shortest diameter, perpendicular to the major axis.

intermediate

Can the ELLIPSE command create a circle? How?

Yes, if the major and minor axes are equal in length, the ellipse becomes a circle.

intermediate

What is the purpose of the 'Axis, End' option in the ELLIPSE command?

It allows you to create an ellipse by specifying the endpoints of the major axis first, then the distance to the minor axis.

What is the first step when using the ELLIPSE command in AutoCAD?

A Specify the minor axis length

B Specify the center point

C Specify the endpoint of the major axis

D Specify the rotation angle

You first specify the center point of the ellipse before defining the axes.

If the major and minor axes are the same length, what shape does the ELLIPSE command create?

A Rectangle

B Ellipse

C Circle

D Line

Equal major and minor axes create a circle.

Which axis is the longest in an ellipse?

A Major axis

B Vertical axis

C Minor axis

D Horizontal axis

The major axis is the longest diameter of the ellipse.

What does the 'Axis, End' option in the ELLIPSE command allow you to do?

A Draw ellipse by center point only

B Draw ellipse by specifying rotation angle

C Draw ellipse by specifying minor axis length first

D Draw ellipse by specifying endpoints of major axis first

The 'Axis, End' option lets you specify the major axis endpoints first.

Which of these is NOT a step in drawing an ellipse with the ELLIPSE command?

A Specify radius of circle

B Specify endpoint of major axis

C Specify length of minor axis

D Specify center point

Specifying a circle radius is not part of the ellipse command steps.

Explain the steps to draw an ellipse using the ELLIPSE command in AutoCAD.

Think about how you define the shape by its axes.

Describe the difference between the major and minor axes of an ellipse and how they affect its shape.

Imagine stretching a circle longer in one direction.

Practice

1. What does the ELLIPSE command in AutoCAD primarily create?

easy

A. Rectangles

B. Straight lines

C. Oval or elliptical shapes

D. Polygons

Solution

1. Step 1: Understand the purpose of the ELLIPSE command

   The ELLIPSE command is designed to create oval or elliptical shapes by defining two axes.

2. Step 2: Compare with other shape commands

   Other commands like LINE create straight lines, RECTANGLE creates rectangles, and POLYGON creates polygons, not ellipses.

3. Final Answer:

   Oval or elliptical shapes -> Option C

4. Quick Check:

   ELLIPSE command = Oval shapes [OK]

Hint: ELLIPSE always draws oval shapes, not straight lines [OK]

Common Mistakes:

• Confusing ELLIPSE with LINE command
• Thinking it creates rectangles
• Assuming it draws polygons

2. Which is the correct sequence to start drawing an ellipse in AutoCAD using the ELLIPSE command?

easy

A. Specify the center point, then the radius

B. Specify the corner points of a bounding box

C. Specify the diameter, then the height

D. Specify the first axis endpoints, then the distance to the other axis

Solution

1. Step 1: Recall the ELLIPSE command steps

   The command requires specifying the first axis endpoints to define the major axis.

2. Step 2: Define the second axis

   After the first axis, you specify the distance to the other axis (minor axis radius) to complete the ellipse.

3. Final Answer:

   Specify the first axis endpoints, then the distance to the other axis -> Option D

4. Quick Check:

   ELLIPSE axis endpoints then distance = B [OK]

Hint: First axis endpoints, then distance to second axis [OK]

Common Mistakes:

• Starting with center point instead of axis endpoints
• Using diameter and height instead of axes
• Specifying bounding box corners

3. What shape will be created by the following steps in AutoCAD?
Command: ELLIPSE
First axis start point: (0,0)
First axis endpoint: (6,0)
Distance to other axis: 3

medium

A. Circle with radius 3 units

B. Ellipse with major axis 6 units and minor axis 3 units

C. Line from (0,0) to (6,0)

D. Rectangle 6 by 3 units

Solution

1. Step 1: Analyze the first axis endpoints

   The first axis from (0,0) to (6,0) defines the full major axis length of 6 units (semi-major radius 3 units).

2. Step 2: Analyze the distance to the other axis

   The distance of 3 units defines the semi-minor radius. Since it equals the semi-major radius of 3 units, a circle with radius 3 units is created.

3. Final Answer:

   Ellipse with major axis 6 units and minor axis 3 units -> Option B

4. Quick Check:

   Major radius 3, minor radius 3 = Circle [OK]

Hint: First axis length/2 = major radius; distance = minor radius; equal = circle [OK]

Common Mistakes:

• Thinking it creates an ellipse with minor axis 3 units
• Confusing line with ellipse
• Assuming rectangle shape

4. You tried to draw an ellipse but AutoCAD gave an error after specifying the first axis endpoints. What is the most likely cause?

medium

A. The first axis endpoints are the same point

B. The distance to the other axis was too large

C. You did not specify the center point first

D. You used the RECTANGLE command instead

Solution

1. Step 1: Understand the error context

   If the first axis endpoints are the same point, the major axis length is zero, which is invalid for an ellipse.

2. Step 2: Check other options

   Distance too large is usually allowed; center point is not specified first in ELLIPSE; using RECTANGLE command is unrelated.

3. Final Answer:

   The first axis endpoints are the same point -> Option A

4. Quick Check:

   Same start and end point = error [OK]

Hint: Ensure first axis endpoints differ to avoid errors [OK]

Common Mistakes:

• Assuming center point is needed first
• Thinking distance size causes error
• Mixing commands

5. You want to draw an ellipse with a major axis of 10 units horizontally and a minor axis of 4 units vertically. Which sequence of inputs correctly uses the ELLIPSE command?

hard

A. First axis start: (0,0), first axis end: (10,0), distance to other axis: 2

B. First axis start: (0,0), first axis end: (5,0), distance to other axis: 2

C. First axis start: (0,0), first axis end: (10,4), distance to other axis: 0

D. First axis start: (0,0), first axis end: (0,10), distance to other axis: 4

Solution

1. Step 1: Define the major axis

   The major axis is horizontal and 10 units long (full length), so endpoints are (0,0) to (10,0).

2. Step 2: Define the minor axis distance

   The minor axis is vertical and 4 units full length, so semi-minor axis distance to the other axis is 2 units.

3. Final Answer:

   First axis start: (0,0), first axis end: (10,0), distance to other axis: 2 -> Option A

4. Quick Check:

   Major 10 horizontal, minor 4 vertical = First axis start: (0,0), first axis end: (10,0), distance to other axis: 2 [OK]

Hint: Major axis endpoints define full length; distance = half minor axis length [OK]

Common Mistakes:

• Using half lengths for axis endpoints
• Mixing axis directions
• Setting distance to zero