How to Use Wrap Feature in SolidWorks: Step-by-Step Guide

In SolidWorks, the Wrap feature lets you project a 2D sketch onto a curved surface to create emboss, deboss, or scribe effects. You select the sketch and the target face, then choose the wrap type to apply the feature.

Syntax

The Wrap feature syntax involves selecting a sketch and a face to wrap onto, then choosing the wrap type. The main options are:

• Emboss: Raises the sketch profile above the surface.
• Deboss: Cuts the sketch profile into the surface.
• Scribe: Projects the sketch as a line on the surface without depth.

You can also set the draft angle and thickness for emboss or deboss.

plaintext

Wrap(Sketch, Face, WrapType, DraftAngle = 0, Thickness = 0)

Example

This example shows how to wrap a circular sketch onto a cylindrical face as an emboss.

arm_architecture

1. Create a cylindrical part.<br>2. Draw a circle sketch on a flat plane.<br>3. Select <code>Insert &gt; Features &gt; Wrap</code>.<br>4. Select the circle sketch.<br>5. Select the cylindrical face.<br>6. Choose <code>Emboss</code> as wrap type.<br>7. Set thickness to 1 mm.<br>8. Click OK to apply.

Output

The circle sketch is raised 1 mm above the cylindrical surface as an embossed feature.

Common Pitfalls

Common mistakes when using the wrap feature include:

• Trying to wrap a sketch on a face that is too complex or has sharp edges, which can cause errors.
• Using Scribe on very small or intricate sketches, making the lines hard to see.
• Not setting the correct thickness or draft angle, resulting in unexpected geometry.
• Forgetting to fully define the sketch before wrapping, which can cause instability.

arm_architecture

Wrong: Wrap a sketch on a highly irregular face without checking geometry.<br>Right: Simplify the face or select a smoother surface before wrapping.

Quick Reference

Wrap Type	Effect	Use Case
Emboss	Raises sketch above surface	Adding raised logos or text
Deboss	Cuts sketch into surface	Engraving or recessed features
Scribe	Projects sketch as lines	Marking or scribing without depth

Key Takeaways

Use the Wrap feature to project sketches onto curved surfaces for embossing, debossing, or scribing.

Select a fully defined sketch and a suitable face to avoid errors.

Choose the correct wrap type and set thickness or draft angle as needed.

Simplify complex faces before wrapping to ensure smooth results.

Use Scribe for line markings without changing surface depth.