Writing data to SD card in Arduino - Cheat Sheet & Quick Revision

Recall & Review

beginner

What library do you need to include to write data to an SD card in Arduino?

You need to include the SD.h library, which provides functions to read and write files on an SD card.

beginner

How do you initialize the SD card in your Arduino sketch?

Use SD.begin(chipSelectPin) where chipSelectPin is the pin connected to the SD card's chip select line. It returns true if the card is ready.

beginner

What Arduino function opens a file for writing on the SD card?

Use SD.open(filename, FILE_WRITE) to open or create a file for writing data.

beginner

How do you write a line of text to a file on the SD card?

Use file.println(data) to write the data followed by a new line to the file.

beginner

Why is it important to close the file after writing data to the SD card?

Closing the file with file.close() ensures all data is saved properly and frees up resources for other operations.

Which Arduino library is used to write data to an SD card?

A SD.h

B Wire.h

C SPI.h

D EEPROM.h

The SD.h library is specifically designed for SD card file operations.

What does SD.begin(chipSelectPin) do?

A Formats the SD card

B Writes data to the SD card

C Closes the file on the SD card

D Initializes the SD card and SPI communication

It sets up communication with the SD card and prepares it for reading or writing.

How do you open a file for writing on the SD card?

A SD.open(filename, FILE_WRITE)

B SD.read(filename)

C SD.close(filename)

D SD.format(filename)

Use SD.open with FILE_WRITE mode to write data.

Which function writes a line of text to an open file on the SD card?

A file.read()

B file.open()

C file.println(data)

D file.close()

file.println() writes data followed by a new line.

Why should you call file.close() after writing data?

A To delete the file

B To save data and free resources

C To open the file again

D To format the SD card

Closing the file saves all data and releases the file for other uses.

Explain the steps to write a text line to an SD card using Arduino.

Think about setup, opening, writing, and closing.

Why is it important to check if SD.begin() returns true before writing data?

Consider what happens if the card is not ready.

Practice

1. What is the correct way to open a file for writing data on an SD card in Arduino?

easy

A. Use SD.close(filename)

B. Use SD.read(filename)

C. Use SD.open(filename, FILE_WRITE)

D. Use SD.format()

Solution

1. Step 1: Understand file opening modes

   To write data, the file must be opened in write mode, which is done using FILE_WRITE.

2. Step 2: Identify the correct function call

   The function SD.open(filename, FILE_WRITE) opens the file for writing. Other options do not open files for writing.

3. Final Answer:

   Use SD.open(filename, FILE_WRITE) -> Option C

4. Quick Check:

   Open file for writing = SD.open(filename, FILE_WRITE) [OK]

Hint: Use FILE_WRITE with SD.open() to write files [OK]

Common Mistakes:

• Using SD.read() to open file for writing
• Forgetting FILE_WRITE mode
• Trying to write without opening file

2. Which of the following is the correct syntax to write the string "Hello" followed by a newline to a file named "log.txt" on the SD card?

easy

A. file.write("Hello");

B. file.println("Hello");

C. file.print("Hello");

D. file.read("Hello");

Solution

1. Step 1: Identify the write functions

   To write text with a newline, file.println() is used. file.print() writes without newline, file.write() writes bytes.

2. Step 2: Choose the function that writes string with newline

   file.println("Hello") writes "Hello" followed by a newline, which is common for logging.

3. Final Answer:

   file.println("Hello"); -> Option B

4. Quick Check:

   Write string with newline = file.println() [OK]

Hint: Use file.println() to write string with newline [OK]

Common Mistakes:

• Using file.read() to write data
• Confusing file.write() with file.print()
• Forgetting to add newline if needed

3. What will be the output on the SD card file after running this code snippet?

File file = SD.open("data.txt", FILE_WRITE);
if (file) {
  file.println("Line 1");
  file.println("Line 2");
  file.close();
}

medium

A. No output because file.close() is missing

B. Line 1\nLine 2\n

C. Line 1Line 2

D. Line 1
Line 2

Solution

1. Step 1: Understand file writing with println()

   Each call to file.println() writes the string plus a newline character.

2. Step 2: Check file closing

   The file is closed properly with file.close(), so data is saved.

3. Final Answer:

   Line 1 Line 2 -> Option D

4. Quick Check:

   file.println() adds newline, file.close() saves data [OK]

Hint: file.println() adds newline; always close file to save [OK]

Common Mistakes:

• Thinking file.close() is missing
• Assuming println() does not add newline
• Confusing escape sequences with actual newlines

4. Identify the error in this Arduino code snippet for writing to an SD card:

if (!SD.begin()) {
  Serial.println("Initialization failed!");
}
File file = SD.open("test.txt", FILE_WRITE);
file.println("Data");
// Missing file.close()

medium

A. File is not closed after writing, risking data loss

B. Serial.println() cannot be used with SD cards

C. FILE_WRITE is not a valid mode for SD.open()

D. SD.begin() should be called after opening the file

Solution

1. Step 1: Check SD initialization

   SD.begin() is correctly called before opening the file.

2. Step 2: Identify missing file.close()

   The file is opened and written to, but not closed, which can cause data not to be saved properly.

3. Final Answer:

   File is not closed after writing, risking data loss -> Option A

4. Quick Check:

   Always close file after writing to save data [OK]

Hint: Always close files after writing to save data [OK]

Common Mistakes:

• Forgetting to close the file
• Calling SD.begin() after opening file
• Misunderstanding FILE_WRITE mode

5. You want to write multiple sensor readings to a file on the SD card, but only if the SD card initializes successfully. Which of the following code snippets correctly implements this logic?

hard

A. if (SD.begin()) {
File dataFile = SD.open("readings.txt", FILE_WRITE);
if (dataFile) {
dataFile.println(sensorValue);
dataFile.close();
}
} else {
Serial.println("SD init failed");
}

B. File dataFile = SD.open("readings.txt", FILE_WRITE);
if (dataFile) {
if (SD.begin()) {
dataFile.println(sensorValue);
}
dataFile.close();
}

C. if (!SD.begin()) {
Serial.println("SD init failed");
} else {
File dataFile = SD.open("readings.txt");
dataFile.println(sensorValue);
dataFile.close();
}

D. SD.begin();
File dataFile = SD.open("readings.txt", FILE_WRITE);
dataFile.println(sensorValue);
dataFile.close();

Solution

1. Step 1: Check SD initialization before file operations

   The correct code first calls and checks SD.begin() before attempting to open the file.

2. Step 2: Proper file open, write, close, and error handling

   Open with SD.open("readings.txt", FILE_WRITE), verify with if (dataFile), write dataFile.println(sensorValue), dataFile.close(), and print error if init fails.

3. Final Answer:

   if (SD.begin()) { File dataFile = SD.open("readings.txt", FILE_WRITE); if (dataFile) { dataFile.println(sensorValue); dataFile.close(); } } else { Serial.println("SD init failed"); } -> Option A

4. Quick Check:

   Check SD.begin() first, then open, write, close file [OK]

Hint: Always check SD.begin() before file operations [OK]

Common Mistakes:

• Opening file before SD.begin()
• Not closing file after writing
• Ignoring SD initialization failure