3D Printing - G-code Fundamentals
Which of the following is the correct G-code command to set the extruder temperature to 210°C?
Which of the following is the correct G-code command to set the extruder temperature to 210°C?
easy📝 Factual Q3 of 15
Step-by-Step Solution
Solution:
Step 1: Identify the command for setting extruder temperature
M104is used to set the extruder temperature, with the S parameter specifying the temperature.Step 2: Check the syntax correctness
M104 S210correctly sets temperature to 210°C. Other commands either control fan (M106) or home axes (G28) or move print head (G1).Final Answer:
M104 S210 sets extruder temperature to 210°C -> Option BQuick Check:
Extruder temp command = M104 [OK]
Quick Trick: M104 sets extruder temp with S parameter [OK]
Common Mistakes:
- Using M106 (fan) to set temperature
- Using G28 or G1 with temperature parameters
- Forgetting the S before temperature value
Master "G-code Fundamentals" in 3D Printing
Want More Practice?
15+ quiz questions · All difficulty levels · Free
Free Signup - Practice All QuestionsMore 3D Printing Quizzes