TransactWriteItems in DynamoDB - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is TransactWriteItems in DynamoDB?

It is a DynamoDB operation that lets you perform multiple write actions (like put, update, delete) in a single, all-or-nothing transaction.

beginner

Why use TransactWriteItems instead of multiple separate writes?

Because it ensures all writes succeed or none do, keeping your data consistent like a single atomic action.

intermediate

Name the types of write actions supported by TransactWriteItems.

Put (add item), Update (change item), Delete (remove item), and ConditionCheck (check condition without writing).

beginner

What happens if one write action in TransactWriteItems fails?

All write actions are rolled back, so no changes are saved. This keeps your data safe and consistent.

intermediate

What is the maximum number of actions you can include in a single TransactWriteItems request?

You can include up to 25 actions in one transaction.

What does TransactWriteItems guarantee in DynamoDB?

A Only one write is allowed per transaction

B Writes happen in parallel without order

C Writes are delayed by 24 hours

D All writes succeed or none do

TransactWriteItems ensures atomicity, meaning all writes succeed together or all fail together.

Which of these is NOT a valid action in TransactWriteItems?

A Select

B Update

C Put

D Delete

Select is a read operation, not a write action, so it is not supported in TransactWriteItems.

How many write actions can you include in one TransactWriteItems request?

A 50

B 10

C 25

D 100

The maximum number of actions per TransactWriteItems request is 25.

If one action in a TransactWriteItems request fails, what happens?

A Only the failed action is skipped

B All actions are rolled back

C All actions succeed anyway

D The transaction retries automatically forever

The entire transaction is rolled back to keep data consistent.

Which of these is a benefit of using TransactWriteItems?

A Atomic writes

B No need for conditions

C Unlimited actions per request

D Faster reads

TransactWriteItems provides atomic writes, ensuring all-or-nothing changes.

Explain how TransactWriteItems helps maintain data consistency in DynamoDB.

Think about what happens if one write fails in a group of writes.

List and describe the types of write actions supported by TransactWriteItems.

Remember it supports more than just adding or deleting.

Practice

1. What is the main purpose of TransactWriteItems in DynamoDB?

easy

A. To group multiple write operations into a single atomic transaction

B. To read multiple items from different tables at once

C. To create a backup of the database automatically

D. To perform batch deletes without conditions

Solution

1. Step 1: Understand the role of TransactWriteItems

   TransactWriteItems groups multiple write actions (Put, Update, Delete) into one atomic transaction.

2. Step 2: Compare with other options

   It does not perform reads, backups, or unconditional batch deletes.

3. Final Answer:

   To group multiple write operations into a single atomic transaction -> Option A

4. Quick Check:

   Atomic transaction = group writes together [OK]

Hint: Remember: TransactWriteItems groups writes atomically [OK]

Common Mistakes:

• Confusing TransactWriteItems with batch read operations
• Thinking it automatically backs up data
• Assuming it only deletes items

2. Which of the following is the correct syntax structure for a TransactWriteItems request in DynamoDB?

easy

A. { TransactWriteItems: [{ Get: { TableName: 'MyTable', Key: {...} } }] }

B. { BatchWriteItems: [{ PutRequest: {...} }, { DeleteRequest: {...} }] }

C. { TransactItems: [{ Put: { TableName: 'MyTable', Item: {...} } }, { Update: {...} }] }

D. { WriteItems: [{ Put: {...} }, { Update: {...} }] }

Solution

1. Step 1: Identify correct TransactWriteItems syntax

   The correct syntax uses the key 'TransactItems' with an array of actions like Put and Update.

2. Step 2: Eliminate incorrect options

   BatchWriteItems is a different API; Get is not a write action; WriteItems is not a valid key.

3. Final Answer:

   { TransactItems: [{ Put: { TableName: 'MyTable', Item: {...} } }, { Update: {...} }] } -> Option C

4. Quick Check:

   TransactItems with Put/Update = correct syntax [OK]

Hint: Look for 'TransactItems' key with write actions inside [OK]

Common Mistakes:

• Using BatchWriteItems instead of TransactWriteItems
• Including Get operations inside TransactWriteItems
• Using incorrect key names like WriteItems

3. Given the following TransactWriteItems request, what will happen if the condition in the Update action fails?

{
  TransactItems: [
    { Put: { TableName: 'Users', Item: { UserId: '123', Name: 'Alice' } } },
    { Update: { TableName: 'Users', Key: { UserId: '123' }, UpdateExpression: 'SET Age = :age', ConditionExpression: 'attribute_exists(UserId)', ExpressionAttributeValues: { ':age': 30 } } }
  ]
}

medium

A. Put action succeeds; Update action is skipped

B. Both actions succeed regardless of the condition

C. Update action succeeds; Put action is skipped

D. Both Put and Update actions are rolled back; no changes are applied

Solution

1. Step 1: Understand TransactWriteItems atomicity

   All actions in TransactWriteItems succeed or all fail together as one transaction.

2. Step 2: Analyze condition failure effect

   If the Update's condition fails, the entire transaction rolls back, including the Put.

3. Final Answer:

   Both Put and Update actions are rolled back; no changes are applied -> Option D

4. Quick Check:

   Condition failure rolls back entire transaction [OK]

Hint: If any condition fails, whole TransactWriteItems rolls back [OK]

Common Mistakes:

• Assuming partial success when condition fails
• Thinking Put action always succeeds
• Ignoring atomicity of TransactWriteItems

4. You wrote this TransactWriteItems request but it fails with a syntax error:

{
  TransactItems: [
    { Put: { TableName: 'Orders', Item: { OrderId: '001', Status: 'Pending' } } },
    { Delete: { TableName: 'Orders', Key: { OrderId: '002' } } }
  ],
  ReturnConsumedCapacity: 'TOTAL'
}

What is the likely cause of the error?

medium

A. Delete action requires a ConditionExpression

B. Missing comma after the TransactItems array

C. TransactItems must be an object, not an array

D. TableName cannot be specified inside Put or Delete actions

Solution

1. Step 1: Check JSON syntax in the request

   ReturnConsumedCapacity is a valid parameter, but the JSON is invalid due to a missing comma after the closing bracket (]) of the TransactItems array.

2. Step 2: Validate other parts

   Delete and Put actions are correctly structured; TransactItems must be an array; TableName is required inside actions.

3. Final Answer:

   Missing comma after the TransactItems array -> Option B

4. Quick Check:

   JSON requires commas between object properties [OK]

Hint: Validate JSON syntax: add commas between top-level properties [OK]

Common Mistakes:

• Omitting commas in JSON request objects
• Forgetting TableName inside each action
• Misusing array vs object for TransactItems

5. You want to atomically update a user's email and delete a related temporary token in DynamoDB using TransactWriteItems. Which of the following request structures correctly achieves this?

hard

A. { TransactItems: [ { Update: { TableName: 'Users', Key: { UserId: 'u1' }, UpdateExpression: 'SET Email = :e', ExpressionAttributeValues: { ':e': '[e-mail]' } } }, { Delete: { TableName: 'Tokens', Key: { TokenId: 't1' } } } ] }

B. { BatchWriteItems: [ { UpdateRequest: { Key: { UserId: 'u1' }, UpdateExpression: 'SET Email = :e' } }, { DeleteRequest: { Key: { TokenId: 't1' } } } ] }

C. { TransactItems: [ { Put: { TableName: 'Users', Item: { UserId: 'u1', Email: '[e-mail]' } } }, { Delete: { TableName: 'Tokens', Key: { TokenId: 't1' } } } ] }

D. { TransactItems: [ { Update: { TableName: 'Users', Key: { UserId: 'u1' }, UpdateExpression: 'SET Email = :e' } }, { Delete: { TableName: 'Tokens', Key: { TokenId: 't1' } } } ], ReturnValuesOnConditionCheckFailure: 'ALL_OLD' }

Solution

1. Step 1: Identify correct atomic update and delete

   { TransactItems: [ { Update: { TableName: 'Users', Key: { UserId: 'u1' }, UpdateExpression: 'SET Email = :e', ExpressionAttributeValues: { ':e': '[e-mail]' } } }, { Delete: { TableName: 'Tokens', Key: { TokenId: 't1' } } } ] } uses TransactWriteItems with Update and Delete actions correctly structured.

2. Step 2: Eliminate incorrect options

   { BatchWriteItems: [ { UpdateRequest: { Key: { UserId: 'u1' }, UpdateExpression: 'SET Email = :e' } }, { DeleteRequest: { Key: { TokenId: 't1' } } } ] } uses BatchWriteItems which does not support Update; { TransactItems: [ { Put: { TableName: 'Users', Item: { UserId: 'u1', Email: '[e-mail]' } } }, { Delete: { TableName: 'Tokens', Key: { TokenId: 't1' } } } ] } uses Put which replaces entire item, not update; { TransactItems: [ { Update: { TableName: 'Users', Key: { UserId: 'u1' }, UpdateExpression: 'SET Email = :e' } }, { Delete: { TableName: 'Tokens', Key: { TokenId: 't1' } } } ], ReturnValuesOnConditionCheckFailure: 'ALL_OLD' } includes unsupported parameter ReturnValuesOnConditionCheckFailure.

3. Final Answer:

   { TransactItems: [ { Update: { TableName: 'Users', Key: { UserId: 'u1' }, UpdateExpression: 'SET Email = :e', ExpressionAttributeValues: { ':e': '[e-mail]' } } }, { Delete: { TableName: 'Tokens', Key: { TokenId: 't1' } } } ] } -> Option A

4. Quick Check:

   Use Update and Delete inside TransactItems for atomic changes [OK]

Hint: Use Update and Delete inside TransactItems for atomic writes [OK]

Common Mistakes:

• Using BatchWriteItems for updates
• Using Put instead of Update to change attributes
• Adding unsupported parameters in TransactWriteItems